This video is an absolute life saver ❤️ There's nowhere to get my phone repaired in rural Japan, but this video made me feel confident enough to fit myself! Thank you for the great walk through!!
Thanks for the video! I could not take appointment for in-store repairing since i didn't bought from official cite in Japan. Also It is too expensive. Buying parts by myself saves me 15000 yen that helps me a lot! Now I can't wait to start the replacement!
Love the vid! One question, i've always been using screwdrivers with detachable bits in my repairs, the benefit of that is that these bits are magnetized too so they hold the screw better and it is not as finnecky.. i always see repair people use screwdrivers that don't have swapable bits.. why is that?
Doesn't seem too hard to do. I'm in training here in Austin TX and so far it's enjoyable taking apart phones. I know for sure the lead tech won't let me anywhere near these phones right now so all I can do is watch. Maybe another week of training and I can attempt it. I think I can do it without any issues.
Im having an issue here everything is in place the phone boots and the big screen works but whrn it boots into software the phone goes blank. What can this be
Depends on the user. My Flip 4 is about to celebrate its first birthday and it has no problems yet. The protective film of the main screen is just starting to come loose - I think I'll have to replace it in about 5 months. From time to time you have to clean the hinge so that the phone can open completely. There a lot of pocket dust is caught, but you can easily remove it with a strip of paper. My recommendation: wait for the generation with IP-certified dust protection.
@@AboutBlank. I’ll tell you my experience. Flip 3. Couple of months down the line the protector started to fail. In the top right it had a tiny tiny little pin prick. I sent it away and they replaced the screen protector(pin hole still there, that’s important later). A month down the line it failed a second time and it had damaged the screen underneath in the crease. They said yeh we’ll fix it. Got a email to say they wouldn’t fix because of the pin prick, you know the same one that was present the first time. I asked them how on earth could that affect the crease. Terms and conditions, phone misuse. When that screen protector fails it actually damages the crease. Every single Samsung device has failed in one way or another. Dog shit.
non flip phones you replace the screen, but flip phones you need to transplant all the components to a new chassis with the new screen. wow Interesting, but makes sense. i fixed/replaced iPhone and android screens before but i guess I'm sending this flip phone for service, looks a bit scary to me, would try it myself if the phone was much older or out of warranty.
This is awesome but a bit disheartening in my case. The pastic frame near the bezel where the phone folds has broken on me. Looks like it's not covered under warranty, and in order to fix it, I'll need to get the entire front screen replaced. I've got a temporary fix for it with a small sliver of electrical tape holding it in place at the moment. Super cool video, and you earned a sub!
I have given my z flip 5 for main screen replacement at Samsung authorized Centre. It’s under warranty. How can i check if my replaced screen is original? Hope Samsung doesn’t do scam with me.
sir, i put my phone in the freezer, and i opened it. it cracked my screen and made a noise is there anyway to revive it? i did it to try and help it from overheating 😢
Can't give you a direct supplier since I don't know where you're from. But when you're searching for a screen replacement (or a battery and etc. ), make sure it's says "Samsung service pack" or something along those lines. From there, check whether the seller has positive reviews or not.
I have replaced this screen twice since Samsung wouldn't warranty the phone because of a scuff on the top plastic bezel 😢 and the 1st replacement the screen protector lifted after 3 weeks and now the 2nd is lifted after about 4 weeks.?😢
This video is an absolute life saver ❤️ There's nowhere to get my phone repaired in rural Japan, but this video made me feel confident enough to fit myself! Thank you for the great walk through!!
Have you found where to buy an inner flex screen? I’m having a hard time finding
Just completed full lcd inner screen service pack repair. This video helped greatly and easy to follow step by step. 👍
Thanks for the video! I could not take appointment for in-store repairing since i didn't bought from official cite in Japan. Also It is too expensive. Buying parts by myself saves me 15000 yen that helps me a lot! Now I can't wait to start the replacement!
Not interested in learning how to. I'm just here to enjoy the video
Same here 😂
Do you require adhesive to put the back screen and back cover on ? Thanks for such a thorough video.
Do you have the link for where you bought the screen from?
Where can I buy the replacement screen?
google injuredgadgets or mobilesentrix
Hey doc! how do I get a hold of one of the repair kits?
Would this come under a internal repair with samsung?
Where can I buy the original Samsung parts for this?
THIS! I checked his description and nothing :/
google injuredgadgets or mobilesentrix
Uhhhhh, I don't think I will try that, but thanks for the video!
Love the vid! One question, i've always been using screwdrivers with detachable bits in my repairs, the benefit of that is that these bits are magnetized too so they hold the screw better and it is not as finnecky.. i always see repair people use screwdrivers that don't have swapable bits.. why is that?
My screen broke about a month ago, do I really have to buy the whole case of the phone or can the LCD screen be removed?
Where did you.get the service kit from ? Great video 👍
Doesn't seem too hard to do. I'm in training here in Austin TX and so far it's enjoyable taking apart phones. I know for sure the lead tech won't let me anywhere near these phones right now so all I can do is watch. Maybe another week of training and I can attempt it. I think I can do it without any issues.
Im having an issue here everything is in place the phone boots and the big screen works but whrn it boots into software the phone goes blank. What can this be
New magnetic calibration, or switching from old screen
@@goldapple56 it was magnetic calibration, I managed to sort it myself using a piece of metal from a safety pin I flattened haha
The only phone that’s tempted me slightly to leave the Apple ecosystem, hopefully the rumours are true and Apple have one coming in 2025.
Dont do it! I had a flip 3 my gf had a flip 4 both broke a few months down the line. Samsungs after care is atrocious.
Depends on the user.
My Flip 4 is about to celebrate its first birthday and it has no problems yet.
The protective film of the main screen is just starting to come loose - I think I'll have to replace it in about 5 months.
From time to time you have to clean the hinge so that the phone can open completely. There a lot of pocket dust is caught, but you can easily remove it with a strip of paper.
My recommendation: wait for the generation with IP-certified dust protection.
@@AboutBlank. I’ll tell you my experience. Flip 3. Couple of months down the line the protector started to fail. In the top right it had a tiny tiny little pin prick. I sent it away and they replaced the screen protector(pin hole still there, that’s important later). A month down the line it failed a second time and it had damaged the screen underneath in the crease. They said yeh we’ll fix it. Got a email to say they wouldn’t fix because of the pin prick, you know the same one that was present the first time. I asked them how on earth could that affect the crease. Terms and conditions, phone misuse. When that screen protector fails it actually damages the crease. Every single Samsung device has failed in one way or another. Dog shit.
No one cares, the flip 5 doesnt have such problems @Properbellend
The magnetic in New screen didn't caused an issue for you , it doesn't need calibration ?
been searching for the same info, as for z flip 3 i saw cases were it gave black screen and needed calibration
non flip phones you replace the screen, but flip phones you need to transplant all the components to a new chassis with the new screen. wow
Interesting, but makes sense.
i fixed/replaced iPhone and android screens before but i guess I'm sending this flip phone for service, looks a bit scary to me, would try it myself if the phone was much older or out of warranty.
This is awesome but a bit disheartening in my case. The pastic frame near the bezel where the phone folds has broken on me. Looks like it's not covered under warranty, and in order to fix it, I'll need to get the entire front screen replaced.
I've got a temporary fix for it with a small sliver of electrical tape holding it in place at the moment.
Super cool video, and you earned a sub!
SAME EXACT ISSUE WITH ME
I have given my z flip 5 for main screen replacement at Samsung authorized Centre. It’s under warranty. How can i check if my replaced screen is original?
Hope Samsung doesn’t do scam with me.
can u tell me how much did they charge
sir, i put my phone in the freezer, and i opened it. it cracked my screen and made a noise is there anyway to revive it? i did it to try and help it from overheating 😢
what kind of accident is that, you wanted to freeze the beers and put the timer inside lol
@@STONJAUS_FILMS I just thought it would cool it down and opening it after being in the freezer wasnt smart:'\
Where can you buy genuine Samsung parts from?
Can't give you a direct supplier since I don't know where you're from. But when you're searching for a screen replacement (or a battery and etc. ), make sure it's says "Samsung service pack" or something along those lines. From there, check whether the seller has positive reviews or not.
@TheImpedans can I buy the battery of u please iv been looking everywhere don't know who to trust
Flip phones aren't perfected yet they are all junk I know I had them never again
I have replaced this screen twice since Samsung wouldn't warranty the phone because of a scuff on the top plastic bezel 😢 and the 1st replacement the screen protector lifted after 3 weeks and now the 2nd is lifted after about 4 weeks.?😢
By the way, a great video and great knowledge
Doesn't seem too bad, quite simple, no wonder the screen is almost 400, it bascially has everything except a couple things from your old phone
Anthony megarry see u Saturday 10.00
Thanks for your call earlier, see you then 👌
and then blackscreen
Yes you are right, he didn't show last part, new screen need calibration, or grind and switch magnetic from old screen to new one.
Yes
New screen need calibration, or switch original magnetic to new one.
stupid samsung
Where can I buy the replacement screen ?