I know that this video is old but i would realy appreciate if someone could help me. Is there a way to adjust microphone sensibility or the ambient sound cancelation? i have the same version as the video (without phusical button for it) it says "Press two keys at the same time" for learn and record ambient noise. The screen turns blue for a momment but it doesnt seem to have any difference after. Also the microphone sensibility option in the app doesnt seem to do anything also. Thank you in advance!
As the charger IC used says suitable for single-cell Lithium-Ion - would go with a lithium-ion battery but I feel both type of batteries should work. Charger IC detail: www.analog.com/media/en/technical-documentation/data-sheets/405442xf.pdf
I got no qr code with the instructions..how do I download the app to use it on blue tooth,or is there another way apart from Bluetooth which won't recognize it when it's scanning
Mine was the same no code,I'm never reading comments again,I see these comments praising it,and how good it is,buy there's no way to ask a question about the product,but I got my money back from the site..I've a small 1 I gave 4 euro for,a few weeks ago,and it'd really good and the sound is great for the price,and so straight forward,turned it on,done the blue tooth with the phone,and it connected straight away...
Hello David, I think it should be possible although I have not tried. If with current design it doesn't work we can modify a little where we remove battery and connect USB output to input of 3.3V regulator, that way it will work..
hello . sir i have 1 one question . what is first layer 2:56 material ??? is that acrylic ? ok what is black layer and what is white layer ? ty for answer me
Hi Pallav, Thanks for your very clear video. Do you know if the Mic is analog or digital ? if analog could I connect a line level signal by removing the Mic and soldering onto the pads of the Mic ?
Is there a connection point where I can solder input wire to connect directly to audio source without having to use the mic pickup? This is for audio accuracy reasons.
@@PallavAggarwal Thanks for your reply. I've tried that. I managed to de-solder the mic then solder two pieces of wire as the audio input wire but it fail to work, in doing that it ruined the LED bar when I solder back the mic LOL
I have not checked the back up time. Back up time will also depend on how much you are using the RGB Bar light. More the LEDs dances to the ambient audio, more power it will consume.
@@PallavAggarwal A bit late but 1:59 "Learn and record the environmental noise spectrum" I have been wondering what that means because pressing 2 buttons simultaneously doesn't do anything
I had sent seen this video but I found a couple of these and made my own block diagram that matched yours.
That’s really reassuring to me.
Thanks.
Great👍
Great man. Subscribed.
Thank you very much for your support ❣️!
Thanks for the teardown.
Welcome! Hope you found it useful.
Very interesting and clear video thank you
Thank you, Charles. Happy that you liked it :)
Very interesting video. Keep up the good work!
Thanks you!
Great video!
Thanks
Very good to understand
Thanks
Nice keep it up
Thank you very much!
😮😮
Teardown Videos playlist: bit.ly/3mZIIVD
I know that this video is old but i would realy appreciate if someone could help me. Is there a way to adjust microphone sensibility or the ambient sound cancelation? i have the same version as the video (without phusical button for it) it says "Press two keys at the same time" for learn and record ambient noise. The screen turns blue for a momment but it doesnt seem to have any difference after. Also the microphone sensibility option in the app doesnt seem to do anything also. Thank you in advance!
Hi I want to upgrade the battery in mine what would you suggest bigger the better 😀 is that a lipo 250 mah in there?
As the charger IC used says suitable for single-cell Lithium-Ion - would go with a lithium-ion battery but I feel both type of batteries should work.
Charger IC detail: www.analog.com/media/en/technical-documentation/data-sheets/405442xf.pdf
I got no qr code with the instructions..how do I download the app to use it on blue tooth,or is there another way apart from Bluetooth which won't recognize it when it's scanning
Mine was the same no code,I'm never reading comments again,I see these comments praising it,and how good it is,buy there's no way to ask a question about the product,but I got my money back from the site..I've a small 1 I gave 4 euro for,a few weeks ago,and it'd really good and the sound is great for the price,and so straight forward,turned it on,done the blue tooth with the phone,and it connected straight away...
Hi, it is possible to disconnect and bypass the battery and use USB to power the LED light bar directly?
Hello David, I think it should be possible although I have not tried. If with current design it doesn't work we can modify a little where we remove battery and connect USB output to input of 3.3V regulator, that way it will work..
What kind of rgb led are they. Ws2812? I want to increase the amount of leds.
Yes
hello . sir i have 1 one question . what is first layer 2:56 material ??? is that acrylic ? ok what is black layer and what is white layer ? ty for answer me
Its a plastic.
Hi Pallav, Thanks for your very clear video. Do you know if the Mic is analog or digital ? if analog could I connect a line level signal by removing the Mic and soldering onto the pads of the Mic ?
It's an Analog mic
@@PallavAggarwal Thanks it now responds to music from my pc (through a wire). The Mic is gone :)
Is there a connection point where I can solder input wire to connect directly to audio source without having to use the mic pickup? This is for audio accuracy reasons.
I think you can remove the mic and give millivolt audio input. Need to experiment to see how it goes.
@@PallavAggarwal Thanks for your reply. I've tried that. I managed to de-solder the mic then solder two pieces of wire as the audio input wire but it fail to work, in doing that it ruined the LED bar when I solder back the mic LOL
@@iceho6460 hmm.. Sad to know it did not work but great that you attempted. If I get time I will check as logically it should have worked.
Hi Pallav Sir, how long does the battery last on this product?
I have not checked the back up time. Back up time will also depend on how much you are using the RGB Bar light. More the LEDs dances to the ambient audio, more power it will consume.
Great content. My question is how did they control the led colors ?
RG LED light bar is using digitally control RGB LEDs so MCU sends RGB data over the serial interface to change the color of the individual LED.
@@PallavAggarwal ohk. Thanks Sir
@@deanprinceagbodjan5812 you are welcome!
Cn it be modified to take 3.5 mm audio input?
Yes, remove Mic and add audio input.
does it work when you charging ???
Yes, it works when on charging.
Is it possible to reduce mic sensivity without phone?
Never tried that, if you have access to MCU firmware, it should be possible. adding resistor in series with MIC, might help, you can try.
I am unable to connect Bluetooth is there a way to activate bt on the rgb bar
I don't remember now but a button should be there to activate Bluetooth. Please check once.
@@PallavAggarwal i have searched many reviews, but have not been able to find the solution
link dedo sir ji
Search on Amazon.in
Buy link
Search on Amazon.in
After using it for one day now it's not turning on and not showing the the charging sign
Ok.. You need to find an issue and resolve. Don't ask me how to do it :)
Can the sound sensitivity be reset
I don't think that can be changed unless you access the mcu via your custom code
And where would I get a custom code
@@timsolle67 you need to 1st understand the hardware and then write your own code.
@@PallavAggarwal yeah I figured that I just need to know where to get codes
@@PallavAggarwal A bit late but 1:59 "Learn and record the environmental noise spectrum" I have been wondering what that means because pressing 2 buttons simultaneously doesn't do anything
Doesn't work once unplugged.
Need to open and check if the battery is still connected? In good condition?
Mine is different but the guts shouldn't be too different.
I didn't realise it wasn't a speaker...it's only lights that work...waste of money..I nearly ate the bar,I was so sick of trying to bluetooth it....