LG Dishwasher Water Inlet Replacement

Поділитися
Вставка
  • Опубліковано 2 жов 2024
  • This video provides step-by-step instructions for replacing the water inlet on LG dishwashers. The most common reason for replacing the water inlet is if the dishwasher does not fill properly.
    Click here to purchase Part #4975DD1001A: www.repairclini...
    You can find printable step-by-step instructions here: www.repairclin...
    Additional dishwasher repair, troubleshooting tips, help with finding your model number, and part replacement videos: www.repairclini...
    All of the information in this water inlet replacement video is applicable to the following brands: LG
    Connect With Us!
    plus.google.co...
    / repairclinic
    / repairclinic
    / repairclinic
    Join our free VIP email list for discounts and money-saving tips: tinyurl.com/pnn...
    Check out our blog: www.DIY.RepairC...
    Don't forget to like and comment on this video, and subscribe to our channel!
  • Навчання та стиль

КОМЕНТАРІ • 7

  • @Koivu27
    @Koivu27 6 років тому +1

    I replaced the water inlet valve, the drain hose and the water inlet assembly. I was still having a leak. I finally figured it out... Make sure the gasket does not move out of place on the water inlet assembly when placing it back. I also used teflon tape on the cover since it has too much play (make sure it screws on properly; difficulty putting it back on). This is where the water was coming from. Many sites kept suggesting it's the door gasket and the vent; but I left it bare and ran a quick cycle and found the source. Hope this helps anyone still not able to figure out where their leak is coming from.

  • @tluva5150
    @tluva5150 6 років тому +2

    I have replaced the water inlet valve but my dishwasher still shows OE error code. It drains if I manually pour water into it, but it seems as if it won’t fill on it’s own. Could this be my problem (replacing actual water inlet assembly as shown in this video)? Not sure why I keep getting the OE code

  • @nathanmoses3392
    @nathanmoses3392 3 роки тому

    I have a slow drip drip that comes in through the water inlet assembly on the left side of my LG dishwasher when the dishwasher is off. It takes about 3 days of non-use of the dishwasher for the bottom of the tub to fill and start leaking water onto the floor. Will replacing the water inlet assembly likely fix my problem or do you think it might be a faulty water inlet valve? Is there a way to know what is the root cause of the leak?

  • @kennydargert2461
    @kennydargert2461 3 роки тому +1

    changed the inlet valve, drain hose, drain pump and STILL wont freaking drain!!!!

    • @kennydargert2461
      @kennydargert2461 3 роки тому

      @@repairclinic thanks for the help, i figured it out yesterday and it was the knockout plug

  • @martinruel6375
    @martinruel6375 3 роки тому

    Will this fix low pressure in the dishwasher? Mine doesn't shoot high and the top sprayers are very weak.... I took out the filter, cleaned debris under the other part after that. Started it in scrub mode and shot high. After that tried the mode again et was back to weak spray. Theres also a big growling noise when its shooting water.

  • @firdosalam7298
    @firdosalam7298 2 роки тому

    LG dishwasher LE eroow whate is problum sir