Best projector weatherproof enclosure how to

This weatherproof enclosure for projector will last for many years of use.
Main materials used:
1/4" thick 24x48 sheet of PVC board (Quantity 1)
8x10 glass piece for projector window
Flexible window sealant around area where top panel closes onto.
2 common type hinges
2 common type latches with lock feature for security
You can also purchase glass same glass piece from here:
amzn.to/3Vi61Id
Royalty free music:
tunetank.com

[@williewilkiewicz6099]

Your videos are excellent, please keep up the good work. Just one question, did you only use one 1/4" thick 24x48 sheet of PVC board?

[@Super_simple_diy]

Yes that’s one I used and it was only one using the dimensions called out on video. I purposely maximized it in this way.

[@PhredDoolittle]

What's the software you used to design the box?

[@Super_simple_diy]

It’s called shapr3d. I do everything with an iPad and this one makes it so much easier.

[@williewilkiewicz6099]

I cannot seem to find the 1/4" thick 24x48 sheet of PVC board. I believe you said it was available at HOME Depot. Any material code would help. Thanks for your help.

[@Super_simple_diy]

Yes I’ll place a link here to the type I used.
www.homedepot.com/p/Veranda-1-4-in-x-24-in-x-4-ft-White-Reversible-PVC-Trim-Sheet-H060XWS6/312995340

[@Super_simple_diy]

I hope it helps if not I can look at other places that may carry it.

[@williewilkiewicz6099]

Having a difficult time finding the PVC Sheets. Could I use black instead of white? Please any help would be greatly appreciated. HD doesn't carry it any more.
@@Super_simple_diy

[@Super_simple_diy]

@@williewilkiewicz6099 oh yeah any color is fine. I used the white since that’s all they had. I’m also not a fan of painting or sealing and was totally fine with the white. I’m blown away that HD doesn’t carry it anymore. Thanks for the heads up since I will be making a new one soon.

[@williewilkiewicz6099]

Any ideas where I can get it?@@Super_simple_diy

[@ericm1232]

What did you use to create the adjustable legs? TIA

[@Super_simple_diy]

I used carrier bolts with a nut to keep them in place and added a coupling nut to be able to adjust them at different heights.

[@anthonyzeoli9299]

What material did you make this out of?

[@Super_simple_diy]

1/4 inch pvc board from home depot. You can buy it in 2x4 feet sections and it’s cost friendly without a need to seal it.

[@mikemancini3774]

What projector did you use?

[@Super_simple_diy]

For this and previous drone show video I’ve posted I used an Epson 536wi type projector. For all my other projection videos I have on my channel from the past it’s been using an Epson 420 type.