Brilliant. Been fiddling with IL2 and VR for a while now. I'm happy with it (and there's nothing like it for immersion) but like you said in your "giving up VR" video, you never stop trying to improve it. Lots of good suggestions here that I will try, especially looking forward to running through openXR. We have similar hardware so I'm hoping for some good gains, everything is still a bit blurry on my end and I can get nowhere near 90hz at that resolution even though I'm running a 7800xt (comparable to a 4070) and a great CPU too. Hopefully I'll see some improvement due to your video. Thanks for the links and compilation of information. I hope this video bring you success.
26:20 The target FPS option is disabled for VR users because it will automatically set it to your HMDs refresh rate. I guess they did it so it's one less option to think about for those who don't know it and might set it up wrong. So the dynamic res option still works and is a good thing to enable imo for VR users because holding fps is more important than resolution in VR.
Good info. Also for those that don't know "Dynamic Resolution factor" is telling IL2 how much you will allow the game to reduce the resolution to improve fps. So at 0.5 it will drop resolution by up to 50% in order to hit the target fps, and at 1.0 it won't drop resolution at all.
hi, tried out virtual desktop yet? Of course, you'll have to buy it(guess 20€ in meta store, if i remember right) and of course its just usable via wifi(wifi5 or better) but it has in my opinion two advantages:less cpu-load because there is no more need of oculus-software on the pc and you have the option for using the headsets gpu/cpu to support your pc to increase performance - so far as i understood. Just a thought for optimazation - for me and my setup(rtx3080/i11900k) it runs well
I just go over my VR Setup and Settings for IL-2 Great Battles and the Quest 3. This Video is not suppposed to be an all encompassing tutorial, its just supposed to show my settings and my thoughts on them. How to setup the Headset itself, how to get OpenXR etc running in the first place is already explained elsewhere. Let me know if you are interested in a quick overview over my recording process as this is another animal. This video was already long enough and will prolly be not really watched :)
Tach auch! You're using an RTX 4070 Ti Super, correct? Performance seems to be very smooth in your recent VR videos, but would you say that the Ti Super is an adequate card for the Q3 at your res/settings? I'm currently running a non-Super 4070 and an i7 14700KF to drive a Reverb G2 and despite all my fiddling with the settings and dropping native resolution by quite a bit (to 75% currently, IIRC), I'm still getting the odd FPS hiccup when flying offline career missions with a lot of AI planes. I'm currently thinking of upgrading to either a 4070 Super or 4070 Ti Super and I wonder if the Ti S is worth the added cost or if the 4070 S might be enough to run IL-2 VR.
I suspect that what you are seeing is more a limitation of the game and its CPU utilasation. Many AI planes cause stress on the CPU, and the game will always have some hickups close to the ground, with many AI planes, many ground targets and over cities. But overall i have a smooth experience.
I briefly tried the G-2 in 2021 but ditched it quickly due to difficulties getting good footage for me video. The Quest 3 is much better in that regard, but I also like it more over all.
Hey I just went with your opencomposite and openxr toolkit setup last week and it was working wonderfully. Now Meta sent out an update yesterday and opencompsite won't work for me anymore on the quest 3. If I revert back to steamvr il2 launches fine. Are you experiencing the same issue?
I played last long the weekend and needed to download the newest version of open composite the in app update was not enough for some reason. Since I havent played since then i dont know if another update broke it again.
OpenXR toolkit doesnt even have IL2 as a listed game. I cant get it to come up in my openXR. I see all my other games, but not IL2. Then i go to openxr website, supported games, and IL2 isnt listed. What do you know that I dont?
Yes this is a known problem, the fix is to install an old version. Sadly I can't post links (because UA-cam) but if you look for "il2 sturmovik dont update open composite" you'll find the right post in the forums with instructions on how to fix.
draw distance of what? Not the terrain, not the planes and not the building. Planes are rendered at 30km or more. and can be seen in the right lighting conditions.
it actually does have a huge effect on render distance for trees and some other terrai details. Especially for trees I really hate when you can clearly see them disappear closely. also its easier to see cities from afar
HELP REQUEST 3090ti, 64GB Ram, i9: Followed all the steps but have two major issues. #01: no more sound in game. Check windows settings and verified integrity of the files in steam as a back up and nothing. #02 I can’t access any aircraft they are all locked while bypassing steam like it isn’t seeing my purchased DLCs. Relogged into my il2 account via the game and same issue. Maybe I should take all my setting back to the way it was before?
My game sessions are rarely longer than 2h. And it's tiring in the sense that it's physically more demanding. But nothing beyond a car drive where you drive backwards often.
@@SheriffsSimShack and actually it is a great workout for the stiff neck of current generation of people used to be very static and look into a computer screen all day long. Im 50 and my neck is much younger if I fly in VR often. Also I find the necksaver same cheating as the TrackIR+wide view, yes its advantage in competitiveness but I prefer more reality over that. We still cheat not having G-forces...
Ah tought you would leave IL-2 after your "state and outlook" video - glad you did not, i like this videos a lot! And to be honest - by all things to complain about il-2 (yes, the graphics dont look top notch anymore) there is no alternative product out there which offers better ww2 flightsim experience. DCS has better graphics but is very limited in ww2 aircrafts and dont offers variants, so things gets a bit off in compareability - does not make much sense to fight in FW-190A6 against the P-51D because the FW-A did not fly as fast as the late-war aircrafts. Il2 doesnt go as deep in tech thing but is tons of fun and i love it in VR. Hope the il-2 team could bring it on a newer engine and bring the models and textures to today-standards but in VR you are right - there is no limit - even the 4090 is getting very quickly to its limits if you upscale the image to have a crisp experience. That you cannot tell much enough. The most important thing in VR is to upscale the render-resolution to 150/160 percent (i think it has something to do with the barrel-distortion of the lenses).
I never said that I leave. I said I fly less and create less videos. That is what I still do. I tried to get DCS running but until a couple of days ago VR broke there, so I lost interest :D
@@SheriffsSimShack Thats true! I have read that the problem with the quest devices is fixed since last update so maybe give it a try - i can tell that the VR experience in DCS is absolutly worth it. the P-47D and the Mosquito in DCS are second to none - absolut top notch!
@@SheriffsSimShack Yeah, I had to use steamlink instead for a while. The issue was just with the oculus desktop software. DCS isn't perfect, and it's focused more on modern stuff, but it's a great sim
Mine's pissing me the fuck off. It runs at a locked 72FPS no issue for about 15 minutes then drops to 4 FPS till I crash the plane then it hovers around 15FPS till I restart the game!
Thought I’d leave a comment just to say THANK YOU Sheriff, I had no idea the standard of VR I could be getting out of even my quest 2 and 6800xt! Followed your guide + the ones you so kindly lumped all together and my god the difference is night and day! Appreciate the effort man!
Hey can someone maybe help me?So I have Ghost of Tabor on the oculuspcvr version and it’s connected with the openxr companion app.But if I’m ingame the menu won’t open.Can some help and send maybe the discord link from the openxr toolkit.Great Video btw.
While it is not a tutorial per se I really enjoyed that one. Especially for people like me who want tap into VR it's a good overwiev & good step in the right direction :) Pretty sure I will come back when my VR is on the way & look it up again! Thanks for your time & effort!
Hello. I am using Quest 3. OpenComposite and others are installed on my computer. But when I select OpenComposite from the switch, SteamVR is blocked. But VR starts like a PC screen, not 3D. I tried everything but in vain. I have a 6800xt card and I need savings. There is no question about installing these programs on the computer. If you have the chance to make a video, I would be grateful. Thank you.
@@calypso976 the Quest 3 has better lenses, the G2 has slightly higher resolution and betters sharpness in the middle, much better stock headstrap day and night better audio, and has no picture compression since it is using display port. Dont see why I would upgrade from G2 to Quest 3, maybe something else will catch my eye in future...
Brilliant. Been fiddling with IL2 and VR for a while now. I'm happy with it (and there's nothing like it for immersion) but like you said in your "giving up VR" video, you never stop trying to improve it. Lots of good suggestions here that I will try, especially looking forward to running through openXR. We have similar hardware so I'm hoping for some good gains, everything is still a bit blurry on my end and I can get nowhere near 90hz at that resolution even though I'm running a 7800xt (comparable to a 4070) and a great CPU too. Hopefully I'll see some improvement due to your video. Thanks for the links and compilation of information. I hope this video bring you success.
26:20 The target FPS option is disabled for VR users because it will automatically set it to your HMDs refresh rate. I guess they did it so it's one less option to think about for those who don't know it and might set it up wrong. So the dynamic res option still works and is a good thing to enable imo for VR users because holding fps is more important than resolution in VR.
Good info. Also for those that don't know "Dynamic Resolution factor" is telling IL2 how much you will allow the game to reduce the resolution to improve fps. So at 0.5 it will drop resolution by up to 50% in order to hit the target fps, and at 1.0 it won't drop resolution at all.
Interesting to see you back into VR Sheriff! Thank you for sharing this information!
hi,
tried out virtual desktop yet? Of course, you'll have to buy it(guess 20€ in meta store, if i remember right) and of course its just usable via wifi(wifi5 or better) but it has in my opinion two advantages:less cpu-load because there is no more need of oculus-software on the pc and you have the option for using the headsets gpu/cpu to support your pc to increase performance - so far as i understood. Just a thought for optimazation - for me and my setup(rtx3080/i11900k) it runs well
Appreciate your time and information.
I just go over my VR Setup and Settings for IL-2 Great Battles and the Quest 3.
This Video is not suppposed to be an all encompassing tutorial, its just supposed to show my settings and my thoughts on them. How to setup the Headset itself, how to get OpenXR etc running in the first place is already explained elsewhere.
Let me know if you are interested in a quick overview over my recording process as this is another animal. This video was already long enough and will prolly be not really watched :)
Thanks for the great video sheriff
Thank you for working on this and sharing
Why did you decide to return to VR after giving it up for 2D?
@@longbowdt I will do a video at some point, but essentially is the recording process with the Q3 is 100000x easier than with the Reverb G2
Tach auch!
You're using an RTX 4070 Ti Super, correct? Performance seems to be very smooth in your recent VR videos, but would you say that the Ti Super is an adequate card for the Q3 at your res/settings? I'm currently running a non-Super 4070 and an i7 14700KF to drive a Reverb G2 and despite all my fiddling with the settings and dropping native resolution by quite a bit (to 75% currently, IIRC), I'm still getting the odd FPS hiccup when flying offline career missions with a lot of AI planes. I'm currently thinking of upgrading to either a 4070 Super or 4070 Ti Super and I wonder if the Ti S is worth the added cost or if the 4070 S might be enough to run IL-2 VR.
I suspect that what you are seeing is more a limitation of the game and its CPU utilasation.
Many AI planes cause stress on the CPU, and the game will always have some hickups close to the ground, with many AI planes, many ground targets and over cities.
But overall i have a smooth experience.
I knew you’d be back to VR!
I never said that I wont.
Didn't you flew with a hp reverb g2 before? Is the quest 3 much better?
And thank you for the video!
I briefly tried the G-2 in 2021 but ditched it quickly due to difficulties getting good footage for me video. The Quest 3 is much better in that regard, but I also like it more over all.
Hey I just went with your opencomposite and openxr toolkit setup last week and it was working wonderfully. Now Meta sent out an update yesterday and opencompsite won't work for me anymore on the quest 3. If I revert back to steamvr il2 launches fine. Are you experiencing the same issue?
I played last long the weekend and needed to download the newest version of open composite the in app update was not enough for some reason. Since I havent played since then i dont know if another update broke it again.
Is there a way to play the game using the quest controllers?
Yassss more IL2 content
Thanks, I'm surprised that you don't change that much in ODT (link sharping, encoder witdh). Anyway where you reduced the headset brightest?
In menue in the set before you start occulus link
OpenXR toolkit doesnt even have IL2 as a listed game. I cant get it to come up in my openXR. I see all my other games, but not IL2. Then i go to openxr website, supported games, and IL2 isnt listed. What do you know that I dont?
you have to use OpenComposite with it to bypass the StemVR, otherwise its not working. The default key to bring up the menu is left CTRL+F2...
i have successfully used open composite up until a few days ago until it updated & now it wont seem to launch have you had the same issues Sheriff??
I havent played for a month now, exept once a week ago. But that worked fine. I havent updated anything tho.
Yes this is a known problem, the fix is to install an old version. Sadly I can't post links (because UA-cam) but if you look for "il2 sturmovik dont update open composite" you'll find the right post in the forums with instructions on how to fix.
19:58 Here the biggest thing that those options affect is the render/draw distance
draw distance of what? Not the terrain, not the planes and not the building.
Planes are rendered at 30km or more. and can be seen in the right lighting conditions.
it actually does have a huge effect on render distance for trees and some other terrai details. Especially for trees I really hate when you can clearly see them disappear closely. also its easier to see cities from afar
HELP REQUEST 3090ti, 64GB Ram, i9: Followed all the steps but have two major issues. #01: no more sound in game. Check windows settings and verified integrity of the files in steam as a back up and nothing. #02 I can’t access any aircraft they are all locked while bypassing steam like it isn’t seeing my purchased DLCs. Relogged into my il2 account via the game and same issue. Maybe I should take all my setting back to the way it was before?
Don't start the game via vr but through steam
@@SheriffsSimShack I will give it a shot! Thank you Sheriff!
Thanks for video. Are you use necksafer?
No. I dont use that. I disliked it very much.
@@SheriffsSimShack so you just turn your head ? with the lack of sideview it must be tiring?
My game sessions are rarely longer than 2h. And it's tiring in the sense that it's physically more demanding. But nothing beyond a car drive where you drive backwards often.
@@SheriffsSimShack ok i may try it ..thanks
@@SheriffsSimShack and actually it is a great workout for the stiff neck of current generation of people used to be very static and look into a computer screen all day long. Im 50 and my neck is much younger if I fly in VR often. Also I find the necksaver same cheating as the TrackIR+wide view, yes its advantage in competitiveness but I prefer more reality over that. We still cheat not having G-forces...
Ta 152 h1
Ah tought you would leave IL-2 after your "state and outlook" video - glad you did not, i like this videos a lot! And to be honest - by all things to complain about il-2 (yes, the graphics dont look top notch anymore) there is no alternative product out there which offers better ww2 flightsim experience. DCS has better graphics but is very limited in ww2 aircrafts and dont offers variants, so things gets a bit off in compareability - does not make much sense to fight in FW-190A6 against the P-51D because the FW-A did not fly as fast as the late-war aircrafts. Il2 doesnt go as deep in tech thing but is tons of fun and i love it in VR. Hope the il-2 team could bring it on a newer engine and bring the models and textures to today-standards but in VR you are right - there is no limit - even the 4090 is getting very quickly to its limits if you upscale the image to have a crisp experience. That you cannot tell much enough. The most important thing in VR is to upscale the render-resolution to 150/160 percent (i think it has something to do with the barrel-distortion of the lenses).
I never said that I leave. I said I fly less and create less videos. That is what I still do.
I tried to get DCS running but until a couple of days ago VR broke there, so I lost interest :D
@@SheriffsSimShack Thats true! I have read that the problem with the quest devices is fixed since last update so maybe give it a try - i can tell that the VR experience in DCS is absolutly worth it. the P-47D and the Mosquito in DCS are second to none - absolut top notch!
@@SheriffsSimShack Yeah, I had to use steamlink instead for a while. The issue was just with the oculus desktop software. DCS isn't perfect, and it's focused more on modern stuff, but it's a great sim
Mine's pissing me the fuck off.
It runs at a locked 72FPS no issue for about 15 minutes then drops to 4 FPS till I crash the plane then it hovers around 15FPS till I restart the game!
Thought I’d leave a comment just to say THANK YOU Sheriff, I had no idea the standard of VR I could be getting out of even my quest 2 and 6800xt! Followed your guide + the ones you so kindly lumped all together and my god the difference is night and day! Appreciate the effort man!
Hey can someone maybe help me?So I have Ghost of Tabor on the oculuspcvr version and it’s connected with the openxr companion app.But if I’m ingame the menu won’t open.Can some help and send maybe the discord link from the openxr toolkit.Great Video btw.
While it is not a tutorial per se I really enjoyed that one. Especially for people like me who want tap into VR it's a good overwiev & good step in the right direction :) Pretty sure I will come back when my VR is on the way & look it up again! Thanks for your time & effort!
nice, I'm downloading this again for the first time in a while. I wonder how the tanks are in VR
Are you able to play single player campaigns in VR without any slowdowns?
yes. The singleplayer missions are about equally demanding on the GPU than the MP Missions. However the CPU needs to do more.
Hello. I am using Quest 3. OpenComposite and others are installed on my computer. But when I select OpenComposite from the switch, SteamVR is blocked. But VR starts like a PC screen, not 3D. I tried everything but in vain. I have a 6800xt card and I need savings. There is no question about installing these programs on the computer. If you have the chance to make a video, I would be grateful. Thank you.
there are plenty around.
it will start as flat PC game until you enable the VR headset in IL-2 game menu.
Can someone help me on this. How do you get the 120hz option? I've seen it keeps maxing at 90 and there's no 120hz option available.
It came with an update for the quest 3
@@SheriffsSimShack Thank you so much for the quick reply!
Hello Sheriff. I do not understand english very well . Tell me again which VR model are you using. Tha nk you.
Meta Quest 3
OK. I have hp reverb g2. It is better or not for you?
@@calypso976 I used the G-2 for a bit and didnt like it much. Mostly because of the WMR Plattform. I liked the Q3 more from the get go.
@@SheriffsSimShack thank you for your answer
@@calypso976 the Quest 3 has better lenses, the G2 has slightly higher resolution and betters sharpness in the middle, much better stock headstrap day and night better audio, and has no picture compression since it is using display port. Dont see why I would upgrade from G2 to Quest 3, maybe something else will catch my eye in future...