12v battery box DC to DC charger lead acid lithium LiFePO4 solar battery monitor
Вставка
- Опубліковано 6 вер 2024
- link to the battery I put in it. • DC MONT 12V 135Ah Lith...
Item description
This 12V battery box includes a built-in DC-DC charger suitable for charging from a vehicle alternator
The easiest way to connect the power station to your vehicle is by using the premium plug-and-play wiring kit supplied
The triple Anderson-style connector fitted to the battery box interfaces with the premium plug-and-play wiring kit which provides a quick and simple disconnect from your power station
The triple connector and 6-meter fused cable provide alternator power to the DC-DC charger on the power station along with an ignition source for charging in vehicles that are fitted with smart or temperature compensating alternator
Supported battery chemistries are AGM, CALCIUM, WET, GEL OR LITHIUM LIFEPO4 (deep cycle batteries)
DC to DC charger can be programmed to suit the correct battery type as all have a different charge voltage
MAX BATTERY SIZE 340 MM L X 185 MM W x 235 mm H
Max battery weight 35kg
Front panel outputs and controls
1 x DUAL USB A type charger 1 x 2.4 amp 1 x QC3.0
1 x DUAL USB C QC4.0
1 x merit socket
1 x on-off main battery switch
1 x digital volt meter
Right side panel
1 x 175 amp Anderson plug can be used for jumper leads to start the vehicle (do not use this function with lithium batteries)
4 x 50 amp Anderson plugs can be used for in or out connections
Left side panel
2 x 12v power outlets (cigarette sockets) max 15 amps each
Rear panel
2 x 50 amp Anderson plugs can be used for in or out connections
1 x MPPT solar input 50 amp Anderson plug only used if your solar panel is unregulated (if regulated use 1 of the standard 50 amp Anderson plugs in our connections
1 x 3-pin Anderson plug starter battery input with ignition source connection
Top panel
1 x 25 amp DC-DC charger with built-in MPPT solar regulator
1 x DC-DC charger guide
Included parts
1 x heavy-duty 12v battery box with 25 Amp DC-DC charger
1 x user manual
1 x battery tie-down strap
1 x premium plug and play pre terminated battery cable total length 6 meters
This allows easy connection between the vehicle's main battery and the auxiliary battery
Comes with 3 pin Anderson plug for easy removal of the battery box
Please note that my recommendation of a 12V battery box DC-to-DC charger for lead acid, lithium, or LiFePO4 batteries, as well as a solar battery monitor, is solely based on my personal review and is not sponsored in any way. If you want to join me on this journey, I kindly invite you to subscribe to my channel. Thank you for being so supportive.
Best regards,
John.
www.ebay.com.a...
Great timeing.Was looking for Batt+Box.. Walked into Altronics Balcatta and there was 1 unboxed,display.$190 and Pete was outta the door,very happy.. Didn't get xtra wireing,u showed.
Hi, Nice review. I wouldn't leave that foam back, it would melt and caught fire. Also it block air for cooling. A hard plastic would be better. might want to add air vents in / out with small fan ( computer )
Look very nice. Are there any fuses?
Yes 3 in the box and 1on the plug and play
@@MrJohnno1969 Thanks Johnno. Appreciate
look forward to followup with battery? What size? I think Powertech is a Jaycar subbrand?... Good idea for off switch. The DC port looks like a merit socket... Will you add shunt and monitor?
Hello, I have ordered a DC MONT 12V 135Ah Lithium Battery LiFePO4 Phosphate Deep Cycle Rechargeable and I am hoping that it will be delivered today. I am also considering using a shunt and monitor, alongside a Battery Monitor Bluetooth KG140F, which is a DC 0-120V 100A 400A Battery Tester Voltage Current VA Battery Coulomb Meter Capacity Indicator. I will make a video of them too. The battery is powered by Grade A prismatic cells with higher energy density than cylindrical cells, and it has an impressive endurance of 6,000 cycles.Thank you for your interest. I hope you enjoy my content, and I'd appreciate it if you subscribed and followed along. from John.
@@MrJohnno1969 will watch will interest
@@MrJohnno1969 that monitor looks a decent size so I will be interested as to where you mount it. also if the screen turns off or is always on
@@unitedstates3068 ua-cam.com/video/Z6xy7l43n40/v-deo.html
@@MrJohnno1969 thanks - look forward to that fancy shunt install