This is the best video I have seen covering all the stages of preparation and paver laying. No nonsense and clear logical instructions interspersed with a touch of humour !! Weel done.
Peter puts his beer down @14:13. When we cut back to the empty chairs @14:23 the beer's gone! Seriously though, entertaining and informative video that I wish I'd seen before I laid a patio with concrete slabs years ago.
great video never thought of all those little details that make the work of leveling stuff and having the edge stones not collapsing with the sand. Definitely uses a little cement based mixture on the side of any patio/walk way if i ever do this type of stuff.
(**A note on the edge pavers**)That "haunching" will only support the edges if the pad is as it's shown; which is an entry or landing pad outside the door or any area with very light traffic. If you're installing pavers where there will be heavy traffic, you would have to install either metal edge bars or at least 6" thick concrete (not mortar) edge to keep the pavers from coming apart at the edge. Great video.
Thank you guys for posting such a great video with so much detail! I used all methods mentioned in this video and I have a great looking landing that is 20 square metres at the back of my house!
Painting and decorating is simple ? Hmm , I’ve corrected some appalling paint jobs over the years. Some people have no idea how to prep surfaces to achieve a quality looking and durable finish.
Quick question - after haunching you said to wait two days before compacting. Wouldn't the plate compaction drive the pavers lower into the sand breaking the haunching? I'm completing my project soon and trying to figure out these last steps. I appreciate any advice!
Can we mix jointing sand with dry cement to fill the gaps then wet it after? Second question: I've seen builders mix cement and jointing sand and spread it all over the flat bed of sharp sand, put the slabs down, then wet the slabs for a few minutes. What do you reckon? Is it a good idea?
Unless it's parmeable paving it could be laid level. But yeh high point near the house and chase height round the house level 150mm bellow FFL OR VENT height to stop dampness. Set your runs on a turn of the bubble away from house. If It has to run in towards the house for any reason put in a gravel strip or if it's a big area that could shed loads of water then put in acco channels. They videos are all bollocks. Correcting lines that run off??? Set 2 lines up and set them square and lay up and out along the lines checking them every now and then. Blocks should be laid tight to keep the bond strong.
Hi, Thanks for video. May I ask you I have prepared my base with road base and compacted it well. Does it have to be 100 % level. It has few high and low spots at few places that I am not able to rectify to 100 %. Would adding pavers sand on next step not fix these few spots. As I am doing 2cm thick sandstone pavers installation how much would you recommend that pavers sand should be poured in. I was thinking 2-3 cm. Please share. Thank You !
looked good, lots of great info. for me, not sure i would plate compact on top of jointing sand makes me nervous i will leave a stain mess.. guess it better be darn dry! also the haunch is good for those small pavers but i'm using much larger 14" square, 3" thick so best i beef up the haunch more.
I assume a "whacker" is a compactor? If so, how do you attach a piece of carpet onto a plate compactor? Which side of the carpeting should be making contact with the pavers?
Wanting to pave a small enclosed backyard. House entrance is facing east, out in the yard there are two walls on the east and south, a retaining wall on the north, how would you set the slop to direct the water away from the house? Thanks
Because they are working off the string line which is their finished height ,gave it 30mm fall but still 65mm below the string line which is their finished height
Fuck the standards on Sheep Island are pretty low. That paving will sink into the stormwater or sewer pipe trench after the first heavy rain. The smarter countries use concrete under the paving, quicker and easier. Then compact sand. Use 25x25 aluminium rails to screed off or screed using profiles like a concretor. Pre cut your halves and use straight away. Use dumpy or laser level to set heights quickly and accurately. 6/10 for the sheep shagger.
Not sure how flex pipe works for screed rails lol. I’d HIGHLY RECOMMEND using galvanized 1” pipe for this part. Plus, without a containment border the sub grade will just fall out from under the pavers.
Peter if u read this message can u please come to my house and help me with my pavers in my mums garden?? Its a very awkward landscape and I've got everything i need but I cant progress any further and I'm trying to complete it so my mum can see it before she....I live in south auckland
Dont use plastic pipe or any pipe use 3mm thick by 30mm wide flat bar and use your screed bar and level to get lines in first then sit strips on top less work and quicker
These guys are wrong. All you need is a wheelbarrow and pavers. Have a bong, dump the pavers in the area you want, spread them around with your foot ..... job done.
6:00 - Not sure why your comment isn't a link to the direct spot in the video so just adding it again to save myself (and others) having to find it. Thanks for sharing originally!
Is there any one who can suggest me what all things to be kept in mind when constructing a tank. the tank will contain corrosive liquid and it need to be liquid leak as well as gas leak proof. Please suggest me some.
I'm a kiwi myself and I love the accents. You could *probably* talk a little faster - I feel like I'm watching an episode of Sesame Street where adults talk really slowly and say things with lots of emphasis so five year olds can understand them ;-)
Sorry to say it No professional paves a job like this Fair enough, some of the basics he explains are true but it’s a slow way to do it I would have that area paved in half the time with the same outcome You don’t need to string line out the whole job if it’s a small patio Also his tip to wet the sand on the side so the sand doesn’t come out underneath is silly as you want to go under the paver with the cement to make it stronger. Metal screed straps not pipe. Compactors of that size compact to a depth of 150/200mm so you just put all your material in and compact on top of both the sub base and screeding sand. I seriously doubt he does it for a living.
Best video on UA-cam for paver installation.
The attention to detail is truly appreciated.
Old videos like these still explain it better
This is the best video I have seen covering all the stages of preparation and paver laying. No nonsense and clear logical instructions interspersed with a touch of humour !! Weel done.
Except that some of it is illogical lol
Finally, a paver installation video that makes sense, and doesn't gloss over how to level the base material. Good job.
They glossed over how to compact the corners though.
@@bravo2966 Also what happens if after compacting it doesn’t go the 10mm that you thought it would
Hands down the best video on youtube for pavers. Of all the videos this one shows the importance and how to of grading a base. Thanks!
Very professional men who know what they're talking about.
That was a really good instruction video and will save it and use it when I do paving. What on earth would I do without UA-cam lol
Finally found a video that shows how to lay the screen bars...... best subject video on the tube...
By far the best video I’ve seen for pavers. Thank you
Peter puts his beer down @14:13. When we cut back to the empty chairs @14:23 the beer's gone! Seriously though, entertaining and informative video that I wish I'd seen before I laid a patio with concrete slabs years ago.
I noticed that too haha!! Great video overall though :-)
Bernhard Hofmann has the
Peter is a nice guy and a professional! Good job!!
What a nice video for learning how to install Pavers! Thanks a lot for sharing.
Alex Alongi this guys are wrong
@@oscarivanvallejoprieto9275 why?
@@oscarivanvallejoprieto9275 yeah how?
great video never thought of all those little details that make the work of leveling stuff and having the edge stones not collapsing with the sand. Definitely uses a little cement based mixture on the side of any patio/walk way if i ever do this type of stuff.
nice job. I will recommend your video to my customers.
we are a paving block machine manufacturer company located in Turkey.
Not all correct but in general not bad. Probably the best one on youtube so far.
(**A note on the edge pavers**)That "haunching" will only support the edges if the pad is as it's shown; which is an entry or landing pad outside the door or any area with very light traffic. If you're installing pavers where there will be heavy traffic, you would have to install either metal edge bars or at least 6" thick concrete (not mortar) edge to keep the pavers from coming apart at the edge. Great video.
Order in Chaos yep I’m in cold climates that concrete will just crack and ruin the job . I always use edging instead
Thank you guys for posting such a great video with so much detail! I used all methods mentioned in this video and I have a great looking landing that is 20 square metres at the back of my house!
aaaarrrrrrgggghhhhhhh
Very informative clear and precise demonstration. Much appreciated. Thank you😷
Nice job guys. One suggestion - don't use plastic pipe. 3/4 to 1" Steel electrical conduit works great and does not flex.
Painting and decorating is simple ? Hmm , I’ve corrected some appalling paint jobs over the years. Some people have no idea how to prep surfaces to achieve a quality looking and durable finish.
Quick question - after haunching you said to wait two days before compacting. Wouldn't the plate compaction drive the pavers lower into the sand breaking the haunching? I'm completing my project soon and trying to figure out these last steps. I appreciate any advice!
Best "how to video" on youtube
excellent and done with humour......great job
Really excellent instructional video. Remember subtitles click the cc button bottom right of video .
😆 good call
Well Thanks to you. Added a new skill. Very well articulated.
Can we mix jointing sand with dry cement to fill the gaps then wet it after?
Second question: I've seen builders mix cement and jointing sand and spread it all over the flat bed of sharp sand, put the slabs down, then wet the slabs for a few minutes. What do you reckon? Is it a good idea?
thanks guys very informative cheers from the uk!! 👍👍
The moment I saw him get in the wrong side of the car I knew this wasn’t someone I should take advice from. 🤣
Just kidding!
Great video. Excellent walk through of the process.
Do u put any Under covers to stop weed 🌿🌱 come true ? Love ❤️ your video. 🏁🇦🇺👏👏
I really enjoyed watching your video,Thanks guys, great video!!
Excellent video. First class
Aren't you supposed to lay the pavers at a slight off level away from the house for correct water shedding direction?
GeneralMartinus 1in ever 6ft I heard.
GeneralMartinus 10mm per 1m as per 4:20 in vid
+GeneralMartinus 1 inch every 8ft? 1/8th inch every foot
Some people just don't listen.
Unless it's parmeable paving it could be laid level. But yeh high point near the house and chase height round the house level 150mm bellow FFL OR VENT
height to stop dampness. Set your runs on a turn of the bubble away from house. If It has to run in towards the house for any reason put in a gravel strip or if it's a big area that could shed loads of water then put in acco channels.
They videos are all bollocks. Correcting lines that run off??? Set 2 lines up and set them square and lay up and out along the lines checking them every now and then. Blocks should be laid tight to keep the bond strong.
Hi, Thanks for video. May I ask you I have prepared my base with road base and compacted it well. Does it have to be 100 % level. It has few high and low spots at few places that I am not able to rectify to 100 %. Would adding pavers sand on next step not fix these few spots. As I am doing 2cm thick sandstone pavers installation how much would you recommend that pavers sand should be poured in. I was thinking 2-3 cm. Please share. Thank You !
looked good, lots of great info. for me, not sure i would plate compact on top of jointing sand makes me nervous i will leave a stain mess.. guess it better be darn dry! also the haunch is good for those small pavers but i'm using much larger 14" square, 3" thick so best i beef up the haunch more.
top job fella,s thank you from down under.
Great video. Thanks for taking the time to put it together!
This video really great. Help me out a lot with our new patio.
Good informative video! Does the drainage work okay with the cemented sides?
excellent job lads well done..great video
Excellent video thanks for sharing
What happen to them? Only 3 videos posted.
Excellent work and excellent details
I assume a "whacker" is a compactor? If so, how do you attach a piece of carpet onto a plate compactor? Which side of the carpeting should be making contact with the pavers?
Wanting to pave a small enclosed backyard. House entrance is facing east, out in the yard there are two walls on the east and south, a retaining wall on the north, how would you set the slop to direct the water away from the house? Thanks
You could slope it towards the retaining wall, there should be drainage installed. Or permeable pavings.
One question... How can you have 65 mm at both ends if you dropped by 30 mm (pitch) at the front end?
Because they are working off the string line which is their finished height ,gave it 30mm fall but still 65mm below the string line which is their finished height
Fuck the standards on Sheep Island are pretty low. That paving will sink into the stormwater or sewer pipe trench after the first heavy rain.
The smarter countries use concrete under the paving, quicker and easier. Then compact sand. Use 25x25 aluminium rails to screed off or screed using profiles like a concretor. Pre cut your halves and use straight away. Use dumpy or laser level to set heights quickly and accurately. 6/10 for the sheep shagger.
AWESOME thanks for the insightful video fullas,much appreciated
Not sure how flex pipe works for screed rails lol. I’d HIGHLY RECOMMEND using galvanized 1” pipe for this part. Plus, without a containment border the sub grade will just fall out from under the pavers.
Nice job 👏👍
awesome job boys whats the estimate for a Job like that?
A lot of great tips - thanks for sharing!
You don't bother compacting the sand?
Great Job I'm going to try this
Where is your compacted base?
8:04
Wow! Thank You ❤
Peter if u read this message can u please come to my house and help me with my pavers in my mums garden?? Its a very awkward landscape and I've got everything i need but I cant progress any further and I'm trying to complete it so my mum can see it before she....I live in south auckland
Thanks for the video! This helped out a lot
How come your driving on the wrong side of the car?
Excellent video, thanks for posting.
Good vid, but I wouldn't use pvc pipe for screed rails they flex, use steel, and attach carpet to the wacker when going over the pavers.
belissimo trabalho,parabéns.
The acting is excruciating, but the advice is solid
Thank you for you time and shering
Perfect Video..... And not even one " DISLIKE ". Lol
so much work but pays off at the end.
A 2.5m long screed with a spirit level in it will save you time and strings... Only string you need is the one to keep pavers strait.
i bet Shelia loved it
Dont use plastic pipe or any pipe use 3mm thick by 30mm wide flat bar and use your screed bar and level to get lines in first then sit strips on top less work and quicker
These guys are wrong. All you need is a wheelbarrow and pavers. Have a bong, dump the pavers in the area you want, spread them around with your foot ..... job done.
You're hired!
Thank you... I was about to waste a lot of time and money...
I think I hired you once...
... that's why now I do it myself!
j/k
pmsl, thats funny as all fk.
MRSomethin1 hhhhh
Don't use plastic pipe that bends, use rigid metal pipe, you bloody dingos!
Oi, use the compactor before you sand, you made a right mess there, mate!
Yer as blind as an Aussie bat with syphilis, ya braindead dingo!
He used compacter before sand u numpty
6:01 nice chart on measurement levels of materials
6:00 - Not sure why your comment isn't a link to the direct spot in the video so just adding it again to save myself (and others) having to find it. Thanks for sharing originally!
Great vid! Thanks!
Is there any one who can suggest me what all things to be kept in mind when constructing a tank. the tank will contain corrosive liquid and it need to be liquid leak as well as gas leak proof. Please suggest me some.
Thanks 🙏
just made you 1000 likes ....good video wish you would have said inches too i mean your are using a american tape...everything on point ....
amazingggggg ! good job guys !
fun and informative thanks guys
or you can just pour concrete 1 base no sinking or settling
Thanks for the tips
Najlepsze jest zagęszczanie nawierzchni dosyć że bez gumy to jeszcze po warstwie piachu (fugi:P)
nice work. well done boys
Holy shit mate! I did it damn right the first time and I was mighty drunk
Why didn't you wack the sand too?
here you go Rob
your sub base must have six inches of misto, in top that no less of three inches of sand ,i like your operation.
A spade? In the US we use Mexicans.
You're recording a video. Why would you be worried about wanting to write anything down?
great video. will check the site soon :D
Great info!
Very well done! Love it!!
Great stuff.
Good work
What about tools?
I've just been watching two for over a minute and a half...!
how come use didn't compact your screed bed before you screeded it, usealy a hand fload is good eneough to do it
I'm a kiwi myself and I love the accents. You could *probably* talk a little faster - I feel like I'm watching an episode of Sesame Street where adults talk really slowly and say things with lots of emphasis so five year olds can understand them ;-)
Good job
Well Impressed
I prefer using metal scaffolding tubes
Najbolji klip
Sorry to say it
No professional paves a job like this
Fair enough, some of the basics he explains are true but it’s a slow way to do it
I would have that area paved in half the time with the same outcome
You don’t need to string line out the whole job if it’s a small patio
Also his tip to wet the sand on the side so the sand doesn’t come out underneath is silly as you want to go under the paver with the cement to make it stronger. Metal screed straps not pipe. Compactors of that size compact to a depth of 150/200mm so you just put all your material in and compact on top of both the sub base and screeding sand.
I seriously doubt he does it for a living.
Note: They were doing it properly for their own benefit, not doing it how a so called professional does it, saving time so as to fill their pockets.
@@johnbower
Nope
Just doing it slower and doing unnecessary things
Definitely not better
There’s a reason professionals are called professionals
Information and funny, thanks