@@aileennidea1164 Hihi, personally I have not stick it back before so not sure it will last, usually I buy new one. But sometime is hard to find a replacement so you have stick back instead.
my machine model NA-F70S7 and got another hook that switching the metal contact. it was broke, so I use 3 second glue and zink plate to attach them together and it''s working. i got the video recording and will upload it soon
Hi is it a huge spring or tiny spring? If it is tiny. You can see the picture here (shp.ee/fbvdvud) it is located at the switch sensor. If it is huge then it is spring from the suspension rod.
Hi our machine keeps filling water I broke the safety switch but already glued it together & the water level sensor tube is opened Should i repair the sensor ? Could be the pressure problem?
Hihi, if washing machine keep filing, see if you turn off power will it still continue to fill, if yes then maybe is your solenoid valve issue. this video guide link if need (ua-cam.com/video/wfCHSAwsxrg/v-deo.htmlsi=dblplj9Kungk7cpl). The water level sensor tube should be fix in place from the sensor to the tub. That is for your machine to detect the pressure and stop at the different water level you set.
@DIYYANG Please am still experiencing the same U12 error code even after changing the washing machine door safety switch with a new one it still does the same U12 error when it enters into rinsing mode.. please i need a technician. Thank you
Hi, I am guessing your washing machine do not have a display panel for error code. If it is older version washing machine. You only can open up each component to see which item have sign of damage or loose connection.
Hi, you can see this 2 video link, it might be dirty at the entrance of the inlet valve (ua-cam.com/video/XxTnjyUivDg/v-deo.html) Or you got a damage solenoid valve(ua-cam.com/video/wfCHSAwsxrg/v-deo.html)
Hi, i will use a multimeter to check if there is power going to the sensors. I think another possibility could be the board not sending signal to the sensors or wire along the way is damaged
@@diyyangSGplease am experiencing the same even after changing the washing machine door safety switch with a new one it still does the same U12 error when it enters into rinsing mode.. please i need a technician
Thanks man. You have saved my money from buy a new washing machine.
Nice! Thank you for letting me know Ur success 👍😊
Hi what if the toggle near spring was broke, should I buy the safety switch than sticking it back?
@@aileennidea1164 Hihi, personally I have not stick it back before so not sure it will last, usually I buy new one. But sometime is hard to find a replacement so you have stick back instead.
@@diyyangSGI just sticked it back but the error keeps showing 😢
@@aileennidea1164 oh no, thank you for sharing what you have experienced. ❤️
my machine model NA-F70S7 and got another hook that switching the metal contact. it was broke, so I use 3 second glue and zink plate to attach them together and it''s working. i got the video recording and will upload it soon
@@momogunsabah thank you for sharing 👍👍
Where do spring go in this machine. I open and it fell from somewhere but don't know where it go?
Hi is it a huge spring or tiny spring? If it is tiny. You can see the picture here (shp.ee/fbvdvud) it is located at the switch sensor. If it is huge then it is spring from the suspension rod.
@@diyyangSG it is a big spring. I think it is a torsion spring. Could it be for the door?
Yesyes you are right👍. i totally miss out that spring for the door. Personally I have not fix before the torsion spring
My error 12 solve in home.. ❤❤ Thanks bro...
Welcome bro, Glad to be able to help👍
How to return the spring
Hi our machine keeps filling water
I broke the safety switch but already glued it together & the water level sensor tube is opened
Should i repair the sensor ? Could be the pressure problem?
Hihi, if washing machine keep filing, see if you turn off power will it still continue to fill, if yes then maybe is your solenoid valve issue. this video guide link if need (ua-cam.com/video/wfCHSAwsxrg/v-deo.htmlsi=dblplj9Kungk7cpl). The water level sensor tube should be fix in place from the sensor to the tub. That is for your machine to detect the pressure and stop at the different water level you set.
Thanks man
@DIYYANG Please am still experiencing the same U12 error code even after changing the washing machine door safety switch with a new one it still does the same U12 error when it enters into rinsing mode.. please i need a technician. Thank you
Sorry 😔 didn't happen to me. Not very sure. 🙏 Hope someone experience it can share any solution
Our washing machine's timer keep blinking. What is the problem?
Hi, I am guessing your washing machine do not have a display panel for error code. If it is older version washing machine. You only can open up each component to see which item have sign of damage or loose connection.
water not come into the machine what was the problem?
Hi, you can see this 2 video link, it might be dirty at the entrance of the inlet valve (ua-cam.com/video/XxTnjyUivDg/v-deo.html)
Or you got a damage solenoid valve(ua-cam.com/video/wfCHSAwsxrg/v-deo.html)
Inlet valve problem
Even after cleaning the corrosion and replacing the door sensor, the U 12 sensor is still showing with beep sound. What could be the problem?
Hi, i will use a multimeter to check if there is power going to the sensors. I think another possibility could be the board not sending signal to the sensors or wire along the way is damaged
@@diyyangSGplease am experiencing the same even after changing the washing machine door safety switch with a new one it still does the same U12 error when it enters into rinsing mode.. please i need a technician
Mera vai kam laga haa