Testing a MANUAL GPU Overclock VS. NVIDIA *NEW* AUTO-TUNING

Поділитися
Вставка
  • Опубліковано 27 сер 2024
  • In this video I'll be covering the difference between stock GPU performance VS manual GPU overclocking performance VS NVIDIA's new "auto tuning" overclocking software.
    NVIDIA App►www.nvidia.com...
    |-----------------------------------------------------------------------------------------------------------------|
    🖥️ Want MORE FPS and ZERO INPUT DELAY? Book my service below
    👇
    xilly.net
    ►Join my discord server: dsc.gg/xilly
    ►Follow me on Twitter: in...
    ►Follow me on TikTok: / x1lly
    ►Follow me on IG: / xillyservices
    ►Subscribe for more: www.youtube.co...
  • Навчання та стиль

КОМЕНТАРІ • 51

  • @Xilly
    @Xilly  Місяць тому

    Hey everyone, we just released OVERCLOCKING SERVICES in my Discord server, if you're interested in a GPU overclock (proper one) or any other overclock join my Discord and head to the Overclocking-Services text channel:
    dsc.gg/xilly

  • @lofigamervibes
    @lofigamervibes Місяць тому +5

    With MSI I was using 125/1165 OC... So I tried the auto and my 4090 tuned to 165mhz for core, and like you said only 200mhz for memory... So I just went back to MSI and upped my core from 125 to 165, but stuck with my 1165mhz boost for memory. It's been stable so far for a few weeks.

    • @naid3947
      @naid3947 23 дні тому

      I have an MSI too and i have a problem:
      Every time I restart my laptop I have to re-activate the automatic tuning? it is always activated, but it is not overclocked when I use it the next day, I have to wait for it to do the check of my laptop every day and it is very annoying.

  • @CroissantDestroyer9
    @CroissantDestroyer9 Місяць тому +10

    bro says his 3090 is trash when its reaching 80C even do thats completly fine and plays at 1080p when the 3090 is recommended to play at 1440p or 4k💀

    • @fede9328
      @fede9328 Місяць тому +4

      80 degrees on 1920x1080 in a 3090? i dont think thats good, 3090 is a bad card because it consumes a lot of power

    • @CroissantDestroyer9
      @CroissantDestroyer9 23 дні тому +1

      @@fede9328 good point but his airflow could be relatively bad and he has almost 300 fps in that benchmark a gpu also doesnt like that even a card from the 40 series could get does temps and still if you overclock 80C is completly fine most gpus get to that temp if overclocked or a few cards who are older than 2 years

    • @thraxberserker9960
      @thraxberserker9960 18 днів тому +2

      80c on 1080p is TERRIBLE for a card made for 4k gaming

    • @tubeless8
      @tubeless8 15 днів тому +1

      He prolly got a shitt cooling situation and font forget he is overclocking a power hungry card it's gonna run hot

  • @humansmene
    @humansmene Місяць тому +5

    running an laptop with an RTX 3050 the nvidia tuning gave me an oc of +50 on both core and mem. BUT manual tuning on afterburner gave me a +120 on core and +670 on mem

  • @percafterperc2000
    @percafterperc2000 5 днів тому

    Great video bro

  • @obsessed2247
    @obsessed2247 Місяць тому +2

    usually my 3060 can push 225+ on the core but cod crashes at 190+

  • @bcknight727
    @bcknight727 Місяць тому +2

    Nvidia Ge Force has had this for years in Alt Z performance overlay, never could tell any difference with auto tune and GeForce causes lag itself, only good if you’re a streamer.

    • @zushikatetomotoshift1575
      @zushikatetomotoshift1575 Місяць тому +1

      It's really not the same.

    • @sethyboi0715
      @sethyboi0715 Місяць тому +1

      i heard they are shutting down nvid geforce and using the nvidia app from now on

  • @michaelrobinson9643
    @michaelrobinson9643 11 днів тому

    I'd like to know if you can undervolt, and then use the auto-OC perhaps? It does the harder work of testing.

  • @itsgunship1629
    @itsgunship1629 10 днів тому +1

    4070 super
    +200 core
    +1050 mem
    74-75c under load, stable for now lol

  • @knislleh
    @knislleh Місяць тому +1

    Crashed my system too.. Lastest nvidia drivers, RTX 3080

  • @Gaetan.N
    @Gaetan.N Місяць тому +1

    Very interesting video! I have tested with the nvidia app and for a free stuff it’s decently good. Once you made the manual overclock , How do you close msi afterburner and keep the overclock like you advised on another video?

    • @Xilly
      @Xilly  Місяць тому

      Turn on Windows logo button in Afterburner, it applies it on startup from then on forward

  • @zushikatetomotoshift1575
    @zushikatetomotoshift1575 Місяць тому +6

    Why did you overvolt the gpu to 100% you are crazy.
    First you don't want to raise the voltage bar you never really need to mess with.
    I recommend not touching the voltage.
    I recommend undervolting by 10%
    Good way to fry your gpu by sliding the voltage bar that much.

    • @Xilly
      @Xilly  Місяць тому

      You don't know how to undervolt or overclock using MSI Afterburner, go rewatch the video and go rewatch what happened to my voltage when I applied my profile, you don't know what the core voltage slider does...

    • @zushikatetomotoshift1575
      @zushikatetomotoshift1575 Місяць тому +4

      @@Xilly I know how it works and I still don't recommend doing it unless you don't care about the lifespan. PS I been into the heavy overclocking scene. If you are using something called liquid nitrogen then you would need to set the voltages. Go and talk to a couple of youtube techies and you will see. I am trying to save people money. A

    • @zushikatetomotoshift1575
      @zushikatetomotoshift1575 Місяць тому +1

      @@Xilly You can still overclock without messing with voltages.
      Tip when you have to start messing with voltages then your gpu is near the med or end of it's life cycle.

    • @Samer_Design
      @Samer_Design Місяць тому +2

      agree

    • @jordanbailey3462
      @jordanbailey3462 Місяць тому

      You are so very lost brother & should not be advising anyone on overclocking.
      The voltage slider in afterburner is extremely locked down by AIB/Nvidia and won't actually allow you to set it to any damaging amount.
      With regards to being beneficial or not.... its dependant on a case by case basis.
      To check if additional voltage will help boost performance
      Open GPU-Z and check the perfcap reason under the sensors tab -
      if it displays:
      "vRel" increase the voltage slider.
      "Pwr" increase the power limit %
      "Thrm" increase fan speed or reduce voltage slider
      TL;DR this guy knows nothing and the voltage slider won't affect your card in any MEANINGFUL way except, at worst - higher temps & potentially (if it was vRel limited) higher performance.

  • @zushikatetomotoshift1575
    @zushikatetomotoshift1575 Місяць тому

    Also I hope you set the the clocks to stock before doing the AI overclock.

  • @RT-oc6iu
    @RT-oc6iu Місяць тому +1

    your voltage is on maximum?

    • @CroissantDestroyer9
      @CroissantDestroyer9 Місяць тому

      thats just dumb it only works if you have youre cores at default and with the overclock it will be unstable

  • @darkizofficial
    @darkizofficial День тому

    260 fps and 80c is garbage? bro is buggin :D

  • @NagoyaRR
    @NagoyaRR Місяць тому

    My Undervolt is better than anything the Nvidia App could come up with

  • @SamkoKalajdzini
    @SamkoKalajdzini Місяць тому +2

    bro wtf is wrong with you using one word subtitles instead of having the whole ass sentance on screen thats retairded

  • @clutchyclutch263
    @clutchyclutch263 Місяць тому

    afterburner is better you can set fan temp to never exceed high temp

    • @Anicrad
      @Anicrad 16 днів тому

      you can set that in nvidia app aswell lol

  • @gokugaming21
    @gokugaming21 Місяць тому

    can you give me link to your xilly os?

    • @TheKeebGuy
      @TheKeebGuy Місяць тому

      u gotta pay

    • @gokugaming21
      @gokugaming21 Місяць тому

      @@TheKeebGuy oh I broke

    • @TheKeebGuy
      @TheKeebGuy Місяць тому

      @@gokugaming21 wdyum

    • @gokugaming21
      @gokugaming21 Місяць тому

      @@TheKeebGuy I don't have any money I just wanted to know about it or like a preview

    • @TheKeebGuy
      @TheKeebGuy Місяць тому

      @@gokugaming21 Its the best i would rec

  • @SlaxFS
    @SlaxFS Місяць тому

    ily

  • @ChadComputers
    @ChadComputers Місяць тому

    Are you interested in doing an affiliate partnership? We sell gaming laptops, and you do gaming optimization videos, so it might be a good fit. I've emailed you with some details.

  • @gerardgauthier4876
    @gerardgauthier4876 14 днів тому

    How to make the most annoying video. Try flashing words as you speak.

  • @NotDenisss
    @NotDenisss Місяць тому

    apex legends optimization plsss

  • @vexydh
    @vexydh Місяць тому

    w

  • @Fabiaaas
    @Fabiaaas Місяць тому

    nvidias "new" overclock aint new 😭shit was already here on geforce experience

  • @Crextures
    @Crextures Місяць тому

    I TWEAK BETTER BUDDY