Hit with 600 grit lightly and reapply and buff it did that to a customers and it made it look like glass after words. That stuff is great it drys fast though and hard on overlaps. Easy fix though hope helps and not to late.
I had the same problem and I used the supplied applicator. I’m thinking this product can be useful in some scenarios but (like ceramic coatings) there is a learning curve to get the best results. I might try on another beater vehicle where anything is an improvement to see if I can do better.
Maybe spraying is the way. I’m starting to think maybe I had it too thick. I’m going to sand that smooth and give it another go before I pass final judgement
Same thing happened to me and I took every precaution to ensure the surface was as instructed for the best application. Also, made sure surface temp was well within range. All I can say is Streak City. Now I have to sand this crap off my car!
I just applied the satin kit on my 1950 truck. Followed their instructions to a T. Scrubbed all flaking off, scuffed with a maroon scotch pad, washed it twice. Washed it again with their supplied gray pad. Then used the wax/oil remover. I let it dry completely, wiped it down with a terry cloth before applying with their supplied applicator. It streaked horribly. Spent a couple hours the next day scuffing, wiped it down again and it streaked again…. Not impressed - especially with the cost. I guess I’m sanding it off and going a different direction.
Sorry to hear you are having the same issues. I’ve tried again and did exactly what you did and it did the same thing. I’m thinking it maybe the satin only. I saw one recently done in flat and it didn’t streak at all. As a last resort I’m going to try and spray it.
I just had the same problem on my black car, using the gloss wipe on. I followed everything they said including using their pad. I then grey scotch padded it back down and tryed again using the pad you used but lighter on the clear. Same streaky results.
Yeah I’ve tested it a couple more times and got the same results. I’ve tried to do it in low humidity and it doesn’t help. In an upcoming video I’m going to try spraying it as a last ditch effort.
The streaks are not from Poppy's, it is the black paint which got re-wetted and mixed into the clear. You applied it correctly, the black paint failed you.
Mine also did the same thing , and I got runs working from bottom to top to prevent that but streaks are terrible hopefully it will cure better than it looks
I've watched this over and over. I noticed you used the edge of the application pad which has stiching which put grooves in the clear. I watched Poppy's Patina page applications and they used the flat of the applicator pad.
ya the first thing i noticed was how little clear coat you put on the pad. the clear coat can't flow out into dry areas that have no paint on them. it can only level out the high and the low spots within well coated areas. and it may need multiple coats
Doesn't matter it does not give enough time to get a good coat on there no matter what area of the cloth you use. You cannot get a good coat without coming back a minute later and finding dry spots its not worth it to sand and go through all that again
Its nothing but a marketing scam. 'Clear coat you can wipe /roll on!' Bullshit. To get it to lay like you desire, you would have to thin it so that it runs like water so goodluck with verticle areas. Then, like most of these products, it flashes off too fast. Just mask off the windows and spray the damn thing because that will be cheaper and less time consuming in the end.
I’ve been in the auto restoration biz for decades, inexpensive quick fix products applied by wiping, rolling and brushes are no substitute for good prep, expensive products and age old proven methods of application. I can see the value in Poppy’s patina in order to preserve old patina surfaces from further decay. But applying it over the top of newer primers, paints, etc.. is probably not what it’s intended for. Just my two cents.
These products are just a marketing scam luring in people who dont have the air and gun to shoot it on. You could attempt the same thing with a regular high solid clear in a gallon jug, mix with hardner, thinner, and get the same damn results. You have to shoot it on.
Hit with 600 grit lightly and reapply and buff it did that to a customers and it made it look like glass after words. That stuff is great it drys fast though and hard on overlaps. Easy fix though hope helps and not to late.
I got the same streaking. I think spraying would be much better. It's on now. I was thinking of scotch brite to buff it back to just flat finish.
I had the same problem, and it seems a lot of people do as well. I yet to find a response from poppys on a solution...
I had the same problem and I used the supplied applicator. I’m thinking this product can be useful in some scenarios but (like ceramic coatings) there is a learning curve to get the best results. I might try on another beater vehicle where anything is an improvement to see if I can do better.
I had the same issue with my black F100. I've heard that 2 coats does help. I figure spraying is the way to go
Maybe spraying is the way. I’m starting to think maybe I had it too thick. I’m going to sand that smooth and give it another go before I pass final judgement
@@flipflopsgaragehave you sanded and reapplied? If so, how did that turn out? I’m in the same boat
That's what I've seen on several cars at car shows. They all had streaking.
Same thing happened to me and I took every precaution to ensure the surface was as instructed for the best application. Also, made sure surface temp was well within range. All I can say is Streak City. Now I have to sand this crap off my car!
Ouch that’s rough. I’m glad I only did one fender now. Good luck with the repairs.
I just applied the satin kit on my 1950 truck. Followed their instructions to a T. Scrubbed all flaking off, scuffed with a maroon scotch pad, washed it twice. Washed it again with their supplied gray pad. Then used the wax/oil remover. I let it dry completely, wiped it down with a terry cloth before applying with their supplied applicator. It streaked horribly. Spent a couple hours the next day scuffing, wiped it down again and it streaked again…. Not impressed - especially with the cost. I guess I’m sanding it off and going a different direction.
Sorry to hear you are having the same issues. I’ve tried again and did exactly what you did and it did the same thing. I’m thinking it maybe the satin only. I saw one recently done in flat and it didn’t streak at all. As a last resort I’m going to try and spray it.
I just had the same problem on my black car, using the gloss wipe on. I followed everything they said including using their pad. I then grey scotch padded it back down and tryed again using the pad you used but lighter on the clear. Same streaky results.
Yeah I’ve tested it a couple more times and got the same results. I’ve tried to do it in low humidity and it doesn’t help. In an upcoming video I’m going to try spraying it as a last ditch effort.
@@flipflopsgarage Keep us posted! I’m going to try and wet sand it to see if it’s tolerable enough for now.
The streaks are not from Poppy's, it is the black paint which got re-wetted and mixed into the clear. You applied it correctly, the black paint failed you.
I guess that’s possible but according to their sight that shouldn’t happen with paint I have. It’s 10 year old single stage paint.
It's not the paint
@flipflopsgarage actually they tell you it is possible it could reactive certain paints
They do state that but my paint didn't fall under either type that could reactivate. @@mitchsavoie3540
Something happen to mine wouldn't use it again
Just found your channel , quick. ? Love the wheels would share what brand they are. Thanks we have a 68 as well
Thank you. The wheels are Rocket Racing Attack. www.holley.com/products/wheels/wheels/vintage/rocket_racing_attack/
@flipflopsgarage Thanks , I watched the video on you TKX I just got the quote from MDL and looks like iam going g to get one. Thanks again.
Glad you found something useful in my videos.
The parts confused me to is it the same as 8 ounces to 1 ounce ?🤣
I think that’s how it works. I’m about to repaint the truck and revisit the clear coat. Probably get confused all over again
Mine also did the same thing , and I got runs working from bottom to top to prevent that but streaks are terrible hopefully it will cure better than it looks
I've watched this over and over. I noticed you used the edge of the application pad which has stiching which put grooves in the clear. I watched Poppy's Patina page applications and they used the flat of the applicator pad.
ya the first thing i noticed was how little clear coat you put on the pad. the clear coat can't flow out into dry areas that have no paint on them. it can only level out the high and the low spots within well coated areas. and it may need multiple coats
Doesn't matter it does not give enough time to get a good coat on there no matter what area of the cloth you use. You cannot get a good coat without coming back a minute later and finding dry spots its not worth it to sand and go through all that again
Its nothing but a marketing scam. 'Clear coat you can wipe /roll on!' Bullshit. To get it to lay like you desire, you would have to thin it so that it runs like water so goodluck with verticle areas. Then, like most of these products, it flashes off too fast. Just mask off the windows and spray the damn thing because that will be cheaper and less time consuming in the end.
I wonder if rolling it on flat surfaces would be better
All about the 8 to 1. It was way too thick. It’s supposed to be slightly thick water.
Looks like you put it on dry. I’m sure it needs to look wet.
I’ve heard this can happen if you don’t use their applicator. Looks like you have them but used a microfiber wax applicator.🤷🏻♂️
I did exactly that. Thanks for sharing.
I’ve been in the auto restoration biz for decades, inexpensive quick fix products applied by wiping, rolling and brushes are no substitute for good prep, expensive products and age old proven methods of application. I can see the value in Poppy’s patina in order to preserve old patina surfaces from further decay. But applying it over the top of newer primers, paints, etc.. is probably not what it’s intended for. Just my two cents.
Wrong applicator
Stuff is garbage. Good for clapped out rigs only.
These products are just a marketing scam luring in people who dont have the air and gun to shoot it on. You could attempt the same thing with a regular high solid clear in a gallon jug, mix with hardner, thinner, and get the same damn results. You have to shoot it on.
Patina is garbage