In 1998, I found the very same size and type hammer, that had been welded to a piece of 1/2” galvanised water pipe. Removed the pipe, cleaned it up and fitted a proper handle. It has been my main blacksmithing hammer ever since and is a little beauty! 👍😁👏👏
Awesome transformation. May God bless you for not running the music throughout the entire video. The tool sounds themselves make the best music. Even the sound of wiping on the finish is better than computer generated music. That said, you really do outstanding work. Thanks for sharing with us.
For restoration purposes, maybe you made it right, but for real life use - not at all. Firstly, welding the hammer is not the best idea, because the metal molecules change their grating and structure. The welded spots become hardened, which is not what you usually want for a hammer. Secondly, the wooden handle you made, it should not have a sharp "support" under the hammer. It should be cone shaped instead. Also, there is no need to use any epoxy. Properly secured handle is good enough and will last the life of the hammer, unless you break it by improper usage.
@@jamesreichardt7573 I am not into "restoration" business. I just repair the tools. And I have repaired them more than I can count of. This is not only limited to hammers or axles but much much more. What are you trying to say in your comment?
@@hid3nax I like what you did with that miss treated hammer , You turned absolute trash into treasure , I would rather have that hammer than a new one .
Один мой приятель в конце 70-х собирал парадный набор слесарных инструментов, полировал, хромировал. Когда отхромировал сам инструменталь ный ящик его тут же и украли со всем блестящим инструментом.
Thanks for comment but there are models like this www.dewalt.com/products/hand-tools/hammers-and-pry-bars/2-pc-17-oz-hickory-framing-nailer/dwht51418 www.stanleytools.com/products/hand-tools/hammers/framing/22-oz-fatmax-framing-hammer--axe-handle/51-403
@@Metallism The links you provide make no sense for those are carpentry framing hammers made to drive and pull nails. Obviously you do know the difference between a cross pen hammer and a framing hammer.
Ich mag Menschen die altes Werkzeug zu schätzen wissen. Die Aufarbeitung ist dir hervorragend gelungen. Ich bin sicher, der Hammer wird dir lange Zeit gut dienen und du wirst Freude haben ihn zu benutzen.
the handle turned out to be uncomfortable, all these extra bends get in the way. The flat head of the hammer is short, in these cases I use a thick spring from the truck, cut out a square and weld it to the hammer.
Please be more careful mate, we want to watch more of your videos but if you've got no fingers it'll be a bit more difficult to restore things. We care. Good video.
Watching your hands so close to the band saw and table saw blade made me nervous just watching it. You could customise your own push sticks... Be safe. Merry Christmas 🎄
درود بر شما. خیلی عالی بود. دو تا سوال دارم. اون خمیر که با پودر رنگ قاتی کردی چی بود؟ دستگاه سنباده شبیه مال شما را از کجا می تونم تهیه کنم؟ سپاس فراوان ازت
Question please: what’s the brand and model of that bench grinder? Looks like a nice setup in terms of size, paper, noise and also that chuck on the side to put a flex shaft I guess? Thanks.
Great job, even if it were kind of dangerous at some points 6:44. And as pointed by others, the welding of the battered parts without normalising and annealing the hammer afterwards, has probably damaged a bit its structual integrity. Technically speaking, the first handle, the welded one, was literally indestructible. Of course with the added weight, you had to be Thor to wield the hammer afterwards. But the outcome is a beauty.
While the steel handle is a lot stronger the rebar as a handle would do your wrist no favours I worked at the steel game for 11years what he did even that welding will in no way harm it C02 weld is a hard weld now if it were cast then he would be ruining the metal you need cast metal rods to weld cast 👍
I know that the importance of safety is different for everyone but lord! Some very sketchy stuff going on here. Dude nearly lost some fingers on that tablesaw. At least homeboys sleeves were buttoned up while using the bandsaw.
It made me nervous too. Counterpoint is that the guy looked like he had been using saws like that for a long time, and still had all his fingers. Not something I would do. If he loses one, he will have no one to point a nub at, but himself.
As a blacksmith, Im telling you, u just ruined hammer, and I mean u welded on the face and peen of the hammer, and u destroyed the hardness of it by doing it. I hate when I see people doing this....
@@Metallism if your hammer is not hardened, it will mushroom the face or the peen to the sides, and that will lead to shrapnels, which are very dangerous
Don't use a compound like that if you wish to use the hammer (or any handled tool) in the future. I'm realizing this is a purely aesthetic hammer restoration.
Ok, let's go beat up something, anything will do. This hammer will definitely destroy wooden objects, and reek havoc on most metals. Thanks for sharing. 👍😁🇨🇱🇺🇸
For support please LIKE and COMMENT 🙏🏼🧡
I really kind of love these channels, the “before “ makes me feel pretty good about my welding and fabrication skills!!!
😄
THOR must be proud of you mate....🔥🔥🔥
😎🧡
Ручка для кувалды и молотка должна быть прямая.Так может быть смотрится красиво,но работать будет неудобно.Это моё мнение.Лайк!!!
Очень правильно а только деревянным дольжен быт
А так же прорезь под клин, 2/3 глубины проушины
how heavy is the hammer?
In 1998, I found the very same size and type hammer, that had been welded to a piece of 1/2” galvanised water pipe. Removed the pipe, cleaned it up and fitted a proper handle. It has been my main blacksmithing hammer ever since and is a little beauty! 👍😁👏👏
Very cool
Awesome transformation. May God bless you for not running the music throughout the entire video. The tool sounds themselves make the best music. Even the sound of wiping on the finish is better than computer generated music.
That said, you really do outstanding work. Thanks for sharing with us.
Thanks 👍 sorry about that 🧡
хули ты хуйню несешь ?))
I really like how you welded additional material to the hammer instead of removing more. Nice.
Thanks 👍
Мастер молодец.обладает кучей времени.
I really appreciate it 🙏🏼
Bunu yapabilmek İcin yılların tecrübesi olmasılazım
@@vahteddineker8701 Дану чтоб ручку сделать что ли . Молоток откавать да !
@@ШкодаХхх мозги Аткуй!
Эх, хорошую вещь испортил, вся железная была, на века. :)
Теперь это не инструмент, а произведение искусства! Лайк !
Glad you like it! 🧡
For restoration purposes, maybe you made it right, but for real life use - not at all. Firstly, welding the hammer is not the best idea, because the metal molecules change their grating and structure. The welded spots become hardened, which is not what you usually want for a hammer. Secondly, the wooden handle you made, it should not have a sharp "support" under the hammer. It should be cone shaped instead. Also, there is no need to use any epoxy. Properly secured handle is good enough and will last the life of the hammer, unless you break it by improper usage.
I do not really understand where the author of the video. but an impact hammer? why is wood not silicone? we live in 21 studies.
Yeah, the hammer is not usable anymore, may be a decoration :)
How many hammers have you restored ? Answer none ! What have You restored , if anything ? Answer probably nothing ,
@@jamesreichardt7573 I am not into "restoration" business. I just repair the tools. And I have repaired them more than I can count of. This is not only limited to hammers or axles but much much more. What are you trying to say in your comment?
@@hid3nax I like what you did with that miss treated hammer , You turned absolute trash into treasure , I would rather have that hammer than a new one .
خیلی عالی بود .. کلی ذوق کردم که ایرانی هستین و این هنرتون رو دیدم ..🌹🌹
ghorbane shoma 🙏🏼
Wow! That hammer turned out great!
Низкий поклон изобретателям болгарки.
😄
А где-то в уголке нервно курит сварщик, узнав, что его любимый молоток попал к реставратору инструмента.
Хорошая работа я так же люблю восстанавливать старые инструменты даже если не пользуюсь ими - спасибо за такую работу
Больше похоже на работу пластического хирурга. Отлично!!!
😄 Thank you
I love this restoration video keep uploading dear
Thank you, I will
Один мой приятель в конце 70-х собирал парадный набор слесарных инструментов, полировал, хромировал. Когда отхромировал сам инструменталь ный ящик его тут же и украли со всем блестящим инструментом.
So we should not chrome the toolbox. 😉 I'm sorry for hearing that.
All this channel is about turning rust into gold. Good stuff.
The handle may not be right for both sides of the hammer are to be used. This is a cross pen hammer.
my thoughts exactly, i made the same mistake when making a new handle for my cross pen hammer a little while ago. had to do it all over again!
Thanks for comment but there are models like this
www.dewalt.com/products/hand-tools/hammers-and-pry-bars/2-pc-17-oz-hickory-framing-nailer/dwht51418
www.stanleytools.com/products/hand-tools/hammers/framing/22-oz-fatmax-framing-hammer--axe-handle/51-403
@@Metallism The links you provide make no sense for those are carpentry framing hammers made to drive and pull nails.
Obviously you do know the difference between a cross pen hammer and a framing hammer.
You did not repair a hammer, you created a work of art !!! Magnificent job .
Thank you very much! 🙏🏼🧡
Отличная работа 💯
Thanks 🙏🏼
Very nicely refurbished. I like the handle wood. Way better than the usual flame burnt types so many do. Thumbs Up
Thank you very much! 🧡🧡
The burnt handles prevent blisters and allow for better grip with less force
I agree with you about the handle
Sort of looks like the hammer for the “Kill’em All” album by Metallica 😉🤣
😂😂
Funny 🤣🤣🤣🤣
Stand up comedy 🤣🤣🤣🤣
@@fawazasharif3277 but I'm sitting down 😳
😂😂😂🤘🤘🤘точно(real)🤘🤘🤘
Un travail remarquable. Bravo.
Thanks a lot 🙏🏼
Хорошая работа👍🏼
Thank you 🙏🏼
Ich mag Menschen die altes Werkzeug zu schätzen wissen. Die Aufarbeitung ist dir hervorragend gelungen. Ich bin sicher, der Hammer wird dir lange Zeit gut dienen und du wirst Freude haben ihn zu benutzen.
Thank you for nice comment 🙏🏼
Great video! I'm curious, what was that black putty you put in between the top of the handle and the head of the hammer?
Thanks a lot 🙏🏼
That's two components epoxy paste.
To hell with Thor's hammer, I want THAT one lol. Outstanding finish!!!
Thank you so much 🙏🏼
All I could think is what happened to that poor hammer to get it to that state. Bravo to you sir for restoring it magnificently.
I want to know which barbarian welded that rebar onto into, and badly as well ...
@@nigelft people that actually work
Thank you so much 🙏🏼
Clean and simple. Attention to detail. Took a lump of rust and turned it into art through craftsmanship.
Can you imagine the shock that would transfer into your hand using this thing before it was restored? It would seriously hurt using that hammer.
🧡🧡
Parabéns pelo trabalho!
Thanks a lot. 🧡
Humble comment sections do exist, lots of love here 💪, your work is inspirational.
Thank you 🙌
Excellent job, great skills!
Thank you so much 🧡
👍🏻👍🏻 very good restoration.
Thank you! Cheers! 🧡
the handle turned out to be uncomfortable, all these extra bends get in the way. The flat head of the hammer is short, in these cases I use a thick spring from the truck, cut out a square and weld it to the hammer.
NICE SAVE!
Adam
Thanks 🙏🏼
Это очень круто, просто произведение искусств!
Thanks a lot 🙏🏼
I agree. 👍 Well done restoration.
ага прям в музей
Well done my friend,from, Bayamo, Cuba
PERFECT BUT NEED MORE MATERIALS AND INSTRUMENTS
Bravo pour le boulot ! 👍
Great restoration. I look forward to more.
Thank's for comment 🙏🏻
Nice work bro but you made it tougher than it should be! Thanks anyway ✊🏻
When i push a piece of wood on a bandsaw, i allow no one to clean the table and pull it at the same time.
I want to keep thumbing up as long as i can.
Thank you so much my friend. 🙏🏼🙏🏼
dear brother m watch your All vedio your vedio are so good keep it up i will spot you
Thank you so much 🙏🏼
Please be more careful mate, we want to watch more of your videos but if you've got no fingers it'll be a bit more difficult to restore things. We care. Good video.
😂 Thanks for comment my friend. Sure I will.
Watching your hands so close to the band saw and table saw blade made me nervous just watching it. You could customise your own push sticks... Be safe. Merry Christmas 🎄
Патрон от шуруповёрта на конце вала заточного👍годная идея, возьму на вооружение, пожалуй
.... 89
Это не ерунда , это рабочий инструмент , и мастер исправил ошибку прошлого . Хорошая работа , все правильно, так и надо , а в метал всегда успеется.
Thank you my friend 🙏🏼
Great job! What was the putty u used?
Thanks a lot 🙏🏼
Two component epoxy.
Show parabéns!
Que trabalho majestoso!
Thank you for your comment🙏🏼
Честитам мајсторе, врло лепо урађено.
Ја такође волим рестаурацију, дође ми као да ствари поново оживе. Поздрави из Србије.
Thank you so much 🧡🧡
Какой-то вандал приварил трубу. Ужас. Мастер браво, подарил вторую жизнь инструменту.👍
Thanks so much 🙏🏼
Получился музейный экспонат. Им работать нельзя.
Тут скорее зря дерево перевели.
درود بر شما. خیلی عالی بود. دو تا سوال دارم. اون خمیر که با پودر رنگ قاتی کردی چی بود؟ دستگاه سنباده شبیه مال شما را از کجا می تونم تهیه کنم؟ سپاس فراوان ازت
Acho que o custo energético que ele teve para restaurar esse martelo, daria pra comprar dois novos.
Thats a hobby for you!
Ok. you do that.
Best restored hammer I ever seen in my life.
My pleasure I'm glad you enjoy
Bela restauração, coisa assim é bom de se ver 👏👏👏👏🇧🇷
Thanks a lot 💚💛💙
Great restoration! ( new sub)
Thanks and welcome.
Question please: what’s the brand and model of that bench grinder?
Looks like a nice setup in terms of size, paper, noise and also that chuck on the side to put a flex shaft I guess?
Thanks.
It's a Chinese brand like Einhell
@@Metallism
Thank you. I’ll look it up.
That's a really nice restore thanks for sharing!!
Thanks for watching! 🧡🧡
Great job, even if it were kind of dangerous at some points 6:44. And as pointed by others, the welding of the battered parts without normalising and annealing the hammer afterwards, has probably damaged a bit its structual integrity.
Technically speaking, the first handle, the welded one, was literally indestructible. Of course with the added weight, you had to be Thor to wield the hammer afterwards.
But the outcome is a beauty.
Thanks for feedback, I'm pleased with the details that you see in this video. 🧡
While the steel handle is a lot stronger the rebar as a handle would do your wrist no favours I worked at the steel game for 11years what he did even that welding will in no way harm it C02 weld is a hard weld now if it were cast then he would be ruining the metal you need cast metal rods to weld cast 👍
Did you re-heattreated the hammer? Otherwise you destroyed the hardened surfaces.
I know that the importance of safety is different for everyone but lord! Some very sketchy stuff going on here.
Dude nearly lost some fingers on that tablesaw. At least homeboys sleeves were buttoned up while using the bandsaw.
Thanks for your advice 🙏🏼 Sure, I will
It made me nervous too. Counterpoint is that the guy looked like he had been using saws like that for a long time, and still had all his fingers. Not something I would do.
If he loses one, he will have no one to point a nub at, but himself.
Nice job, mate! Liked & subscribed
Thanks and welcome 🧡
Я сегодня гаечный ключ 32х36 отшлифовал. Теперь жалко им порльзоваться.
Отдай трактористам или сварщику, они из него сделают то что надо.
@@antonioebuko9447 самому нужен.
Nice restauration from pretty f***up to really beautiful. Thanks for sharing.
Glad you enjoyed it 🙏🏼🧡
Мастер.
Работа великолепная очень всё, красиво. И окуратно.
Лайк. 💯
Подписка, на канал заранее спасибо.
Ждём новых видео 📹 роликов.
Удачи 🤞
Thanks for comment. it's my pleasure that you like my channel. 💪🏼🙏🏼
мастер!приятно смотреть.
Glad you like it. 🙏🏼🧡
Мастеру респект!
Я бы этот молоток выкинул в металлолом!
😊🙏🏼
Чего не сделаешь ради просмотров...
How did the hammer head get from satin finish to polished?
Someone did everything they could tell keep that hammer alive.
I'm grateful for your comment 😍
What was the point of removing the mass mark?
Because it wasn't 1500g anymore.
@@Metallism that is the strong reason indeed :)
😅
I also will spend $650 to save a $10 hammer
الموضوع لا يتعلق بالمال بل بالهواية
ينفق الكثيرين اموالا كثيرة من اجل هوايتهم
😂
This guy doesn't mess around like some with their little solutions and dip, he just attacks the metal and makes it behave. I like that.
Wow that's kind of you. 🧡🧡
Good ,very good job
Thank you Zak 🙏🏻
You anlin
Damn that came out nice! Great work man,
Glad you like it 🙏🏼 🙏🏼
As a blacksmith, Im telling you, u just ruined hammer, and I mean u welded on the face and peen of the hammer, and u destroyed the hardness of it by doing it. I hate when I see people doing this....
You're right I didn't know that. This is an old video.
@@Metallism if your hammer is not hardened, it will mushroom the face or the peen to the sides, and that will lead to shrapnels, which are very dangerous
Wow! Smashing job.
Glad you like it! 🧡
Зачем тратить столько времени и сил из за ерунды
Then don't 😉
Yapacak birşey bulamassan böyle seylerinen uğraşırsın
Как зачем? Мы же посмотрели😁
😀👍super ... you are great with iron ... but it doesn't go around wood, you bothered unnecessarily..I'm a carpenter 👋😀
😄 I know that i'm not a pro but I like to have experience.
@@Metallism 👋😀👍ok but respect really nice better than new 😀 what about that hammer? it's a shame to do something with it
Nice Work ! AKA Outstanding !
Much appreciated! 🙏🏼🙏🏼
@@Metallism I just call them like I see them , And that is the only way to turn a piece of scrap back into better than what it was when it was new .
Молоток уже и не мечтал о такой судьбе) 👍
😄 🧡
liked and subscribed just because the thumbnail is impressive ❤️ now i’ll watch the video.
My pleasure 🙏🏼
Прекрасная работа , примите мои поздравления !!! А почему до реставрации , на молотке столько всего лишнего наварено было , он вроде целый был ???
How is the balance since you offset the center on bottom of handle??
Good job man 👍🏼👍🏼
Thanks for the visit 🙏🏼🙏🏼
Nice job. How many hours have you worked in this?
A lot 😂
Ажойиб 👍👍👍👍👍
Thanks 🙏🏼
Great job!🪓🛠️🔧😁
Glad you liked it! 🧡
Waoo very good job interesting.
Thanks a lot 🙏🏼
Beautiful! 👍🏻
Thank you! 🧡
Master of the angle grinder. Good job sir.
Thank you very much! 🙏🏼
The Rusty Hammer looks much better !
🙄
Very nice job. Beautiful hammer
Thanks 👍
Bravo, bravo, bravo, very beautifull, good video, perfect product, awesom work, abs. respectfull from old BG.
Glad you like it!
Glad you like it!
Nice work! What compound did you use between handle and head?
Thanks 🧡
2 component epoxy.
Don't use a compound like that if you wish to use the hammer (or any handled tool) in the future. I'm realizing this is a purely aesthetic hammer restoration.
Looks great!!
Enjoyed your video and I gave it a Thumbs Up
tnx for comment 🙏🏻 I posted another video, I'm glad to know your opinion about it
@@Metallism You are very welcome and I'll be looking for it!
باریکلا به شما هموطن خوشذوق و استعداد
و البته با حوصله
Merci Micheal jan 😉
@@Metallism
tnx a lot 🌹
Outstanding/Bravo....
Many thanks! 🧡
Ok, let's go beat up something, anything will do. This hammer will definitely destroy wooden objects, and reek havoc on most metals. Thanks for sharing. 👍😁🇨🇱🇺🇸
that table saw cut was sketchy brother. glad you didnt get stung