ok i have did this before but noticed a big flaw you can't use the flip key as it has not been cut :p so you would have to take it to a key cutting place to get it cut if they allow car key cutting :S
is the flip key of the same length as the standard one? i recently bought one off Ali-express but the lengths of the keys do not match and the locksmith told me that it could not be cut.
Immanuel Kant he showed how put the most important part into the flip key case but the actual metal part needs to be replaced. it isn't that hard because for example I'm able to turn the ignition key at my friend's car with my key but it doesn't start because the code on the pcb board doesn't work with immobilizer saved code ;)
Patrik B yes there are 4 types of keys and that case is able to mount all of them, after you cut them you need to go to an Opel shop to make it useable in your car, cause the codes of the immobiliser ain’t on the new key.
ma refeream....adica mut totul in carcasa briceag cu cip cu totul,am vazut ca au locasurile facute gata decupez si lama si dupaia merge totul normal deschidere,pornire nu trebuie sa fac ceva sa recunoasca noua cheie?
Rofl this is a joke Wright. It would be top if he says you can throw away the old key. Come on dude this is onley good if you open and close the door. But no way you can start you're engine whuwhahahaha.
Do not envy the one who is strong and rich, with the dawn always comes the sunset. With this life is short, which is equal to inhalation, treated like this you hire. Our like # 123
but my old key isn't same, starter. how we can change this
ok i have did this before but noticed a big flaw you can't use the flip key as it has not been cut :p so you would have to take it to a key cutting place to get it cut if they allow car key cutting :S
obviously, but you have 2 keys
is the flip key of the same length as the standard one? i recently bought one off Ali-express but the lengths of the keys do not match and the locksmith told me that it could not be cut.
The one i have used was the same size as the original and the cutting went perfectly.
Charlton Saliba it should have the same length as original one
Are you a serious man? Just try to start the car with the new key...
Immanuel Kant he showed how put the most important part into the flip key case but the actual metal part needs to be replaced.
it isn't that hard because for example I'm able to turn the ignition key at my friend's car with my key but it doesn't start because the code on the pcb board doesn't work with immobilizer saved code ;)
Immanuel Kant Obviously you will need to have the key blade on the new key cut to match your old one lol
Dumb ass
haha😂😂😂
is the G Astra key same as A Zafira key?
Patrik B yes there are 4 types of keys and that case is able to mount all of them, after you cut them you need to go to an Opel shop to make it useable in your car, cause the codes of the immobiliser ain’t on the new key.
Say thanks for watching
Very good video.......thank you.
What about key hu46?
I have a Question, my original Opel Key for my Astra is Glued, i cant pull the buttom part down. What can i do?
Hardest part is the bloody spring loaded thingy. I was trying to load the god damn spring for about 20 mins. I dont belive it... :)
tamam icini degistirdin anladikta peki ya anahtar ucunu nerene sokacak bu?
opellerden anahtar uclari ayni içindeki çipnarabanin calismasini sagliyo diye biliyorum
+Safa Bayram umarım öyledir. yoksa videoda gorunen dumduz bir anahtar ucu gibi sanki.
anahtarciya gidip kestirmesi lazim, chip felani tamam ama anahtar haric.
dar lama de la cheie nu trebuie decupata dupa cea veche?
dupaia trebuie sincronizat ceva sa se adapteze cheia noua pentru a porni masina?
da, se taie in orice centru si nu are nici o treaba lama cu sincronizarea ...
ma refeream....adica mut totul in carcasa briceag cu cip cu totul,am vazut ca au locasurile facute gata
decupez si lama si dupaia merge totul normal deschidere,pornire
nu trebuie sa fac ceva sa recunoasca noua cheie?
exact, muti totul, tai lama si asta a fost.
iti multumesc mult pentru raspunsuri!!
te respect pentru tutoriale ,te stiu si de pe forum!!
scuze de deranj!
Nothing!!!Nur gehause ist ok Aber die nadel????????
Rofl this is a joke Wright. It would be top if he says you can throw away the old key.
Come on dude this is onley good if you open and close the door. But no way you can start you're engine whuwhahahaha.
Yes you can lol. Chip is in the new key. Are you ok?
@@ademiravdic are U okey lol?
Dacă fac conversia mai trebuie să fac sincronizarea? ca de exemplu la Ford se resetează si trebuie făcută
nu, merge direct
merci
you dont need to program this key fob?
no, because you use the spare key that is already programmed on the car
Ok thanks for answer i will do same to my car key
where can i buy the flip key body to do this conversion.
+Sam Crawford have a look on ebay maybe you will find some
Amazon
how do you use the rear screen wash
astra g
Nizam Ahmed push right hand stalk away from you
my chip doesn't fit
why do none of these videos show how to put your old blade into the new key fob?
because you DON'T put the old blade in! You cut the new blade!
What the heck dude. How I’m I going to start my car with that. Doofus
so what but key going in barrel
Booooo no J
Do not envy the one who is strong and rich, with the dawn always comes the sunset. With this life is short, which is equal to inhalation, treated like this you hire. Our like # 123