I power Yamaha suitcase generator, no start let's fix it!
Вставка
- Опубліковано 12 лют 2023
- Today we are working on a Yamaha powered ipower suitcase generator. this is a no start issue the customer dropped it off and said they replaced the spark plug and it still wouldn't start.
Let's dig in and fix it!
If I helped you save some cash, cash app me, I accept tips, thank you!
cash.app/$Tepcocyclerepair
Thank you!
Amazon Affiliate links.
Stihl 4 mix Valve adjustment kit: amzn.to/3M037EM
RMStator Peak voltage adapter amzn.to/3pxsOSJ
2009 Chevy Colorado 3.7 thermostat: amzn.to/3ob2tsR
Mastercool high side socket: amzn.to/3Pg5yDI
Camshaft for this 725 Briggs amzn.to/3R6dkBD
Moog Promaster city front sway bar linkage, for 1 amzn.to/3OJJh0z
Oil filter: amzn.to/3abcuzi
Pneumatic bleeder: amzn.to/3mHjaN6
Oil extractor: amzn.to/3BkMWvc
Tire paste for easy tire install amzn.to/3jvKlZO
My favorite rear tire amzn.to/3AclT5w
My favorite front tire amzn.to/2UhcJUF
My tubliss set up amzn.to/3yaDb13
My favorite screwdriver (pick the longest) amzn.to/3yfP99T - Авто та транспорт
Thank you so much for your help, I already fixed my generator with your video, I really appreciate it.
God bless you
Awesome, great to hear!
Had issues starting my unit and this video was very helpful. However after cleaning carb, replacing spark plug and checking spark, I decided to remove valve cover. I found push rod was not pushing rocker. I slowly pulled the cord and held the push rod until motor seemed in correct position, pressed the valve down and inserted the push rod onto position. Replaced cover and and tested. Works great like new.
Thank you for sharing! I knew what was wrong with mine just from the surging but heard it was a nightmare to fix. You have calmed my nerves sir! Your awesome!
It's not bad at all to fix, thanks for watching!
Thanks, you helped me get my generator started before I spent money on a new calibrator!! Much appreciated
I called IPOWER and they sent me a free carb 2 years out of warranty.
Started 2nd pull. LOVE I power
Great vid, I had forgotten how to pull the cover off 🤭🤷🏻♂️ After watching the whole video I am now prepared if it does go south. Thanks!
I have just bought one of these , I took the cover off to check it over , and thought to myself that is going to be a nightmare to work on if anything goes wrong with it, ....thankyou for your video , I am not as concerned as I was 😊
Thank you for the video really helped out
Thank you for your help. Just took the bottom of the carb. off put in new gas and it worked.
Thank you for the video. Got me running again!
Nice job thanks for the info
Like Tony tiger Say " look Great and Nice job . Ho from Puerto Rico
they still seal when they have a ring, i never replaced one that had a ring that held the fuel in , but if it leaks you need to take the carb out and put one in so if you have one, just put one in ...
I didn't have an o-ring kit for this and everything sealed right up.
Any idea why the DC outlet would stop working?
Great how to.. I'm curious if you could have just removed the air filter housing and then removed the carb bowl to clean the jets.
Absolutely, that was my plan but I couldn't get the bowl off and didn't want to hit it any harder than I did at 8:25 . So yes if your bowl comes off that's how I would do it.
I could not put the bowl back. How did you do it? Thanks.
I hot a similar one , but mine don't produce electricity 😢
I have the same problem with my own it’s not starting are you in LA
Across the country in NC.
I have the Ipower 2300. The red one not Yamaha. And it won't start. When I stored it I emptied all the fuel from the carb. After 2 yrs I tried starting it and won't start. I took it apart just like you did. The carb looks exactly like yours and everything looked good. I still cleaned it really good and still won't start. Any idea what could be wrong?? It's pretty much new. I only used it once for 3 days 2 yrs ago.
Thanks
Is the carb filling with fuel? If so check for spark.
@@TepcoCycleRepair I'll check for spark tomorrow. Carb is getting fuel. Thanks for the fast response
@TepcoCycleRepair Spark plug is sparking and the carburetor is getting fuel. Any idea what else it could be?
@@adolfoperez8228 It's pretty new but my next step would be to check valves and do a leak down test.
Just Fixed my generator woo hoo thanks brother . 🦾. I have a es2400is.