I tell you, after my back surgeries and not being able to do much of anything, I have thoroughly enjoyed all of your videos. I watch current videos and then go watch the older ones. Thank you so much for all of your and Eddie and ZZ Mark for the hard work. I have another back surgery in July, so please keep them coming.
It is as always a pleasure to not watch you saw but to see the the back end staff in operation. It might only be a snack video, but it could easily make a full meal. I hope you all have a good day and I hope ZZ liked his tribute.
Always enjoy watching. You had me wondering for a while cause I didn't hear you tell Bill about putting the taper away. Better late than never, great job guys.
My wife and I enjoyed seeing you again at Northern Pike. You 3 are really good people. My wife doesn’t like to have her picture taken, but when I showed her the picture on your video she said, I don’t look to bad with Eddies arm around me , lol . She also said the guy who looks like Santa seems like a nice guy. Sorry Mark, she didn’t even mention you. Thanks for your hard work making videos.
I could tell the Bus Moter was sounding very healthy today!! I was thinking it must be very soft wood. Then you mentioned that you sharpened the blade!
Loved the snack video! Thank you , I could binge watch your videos all day. Thanks for visiting with me at Corsica at the fun raiser for Nuts I have a great picture of us.
That log made a nice stack of boards. Good job! Mark, some of the other sawmills cut some interesting logs but, your camera angles and narrations are way better. Keep up the excellent videos!
Hi Mark. Another beautiful pine boards. John Clark sawn some 6 -1/4s spruce boards & " greenhouse" dried them late March. A few videos back. He made a box. He said: Mark is the better carpenter! As a retired remodeling carpenter and builder of 40 yrs. He did very well. Well. You, Ed,ZZ, & Hank have a safe & fun Memorial Weekend. 😍😊😉👍❤️💜🙏🏻🙏🏻🙏🏻🙏🏻🌲
Five o’clock in the morning some nice straight boards coming off the mill again , off ratting again today good fun and sport it’s very interesting watching them dogs work , one of the few sports the namby pambies haven’t stopped , any way you guys have a nice day
Excellent as usual. The taper that creeps out needs to have the valve for it resealed. No oil should be getting past the valve until it is opened. I would take it in to a hydraulics shop and have them rebuild it, or just buy a new valve and replace it.
Hi Mark love the snacks but really like the 12 coars buffet more ha ha ah :) ,thanks for showing your vids loven them so relaxing for me to watch and just love your commentary as well 100% great :)
@ 15:00 with the hydraulic pressure seems like the dogs could be flat instead of pointed and still hold a cant, but pointed just when working with the round logs/timbers / a system strictly to hold cants would be ideal situation with flat dogs
You might consider doing a quick segment to begin a video when you install the new lower dog...I'll bet there are still a lot of viewers who don't realize there are lower dogs also.
Just subscribed how often do you have to sharpen the blade and how long do the carbide tips last, enjoy the videos, have a great weekend . Thanks for the people who served to make things like this happen.
See like I saying they had a bigger saw blade they wouldn’t have to turn the log about four times ! To get a flat spot to get a good flat area to saw the log Into good boards !
52 54 56 inch are the common sizes for circular mills all over the world That’s just the way it is Everyone has to 5 or 6 side a log at some point unless they have a top saw or big bandsaw There’s really not that much more waste it may look like it but most of that being cut off is unusable anyways
How many hours on the bus motor and when was the last time it was rebuilt? How many rpm when you are sawing? We ran our mill in central VA with a similar engine purchased surplus from the Navy. 2 stroke diesels are amazing.
The funny thing is the stop sign thing is nothing new. It's dang near as old as the blade. Fact is sometimes a log doesn't fit the mill but it still needs to be cut. Logs don't come in one size.
I tell you, after my back surgeries and not being able to do much of anything, I have thoroughly enjoyed all of your videos. I watch current videos and then go watch the older ones. Thank you so much for all of your and Eddie and ZZ Mark for the hard work. I have another back surgery in July, so please keep them coming.
thank you David I hope the next surgery goes good for you.
Mark, BIG snack...had it all! 😎😎💯💯Have a great weekend! Thank You all who Served!
thank you.
It is as always a pleasure to not watch you saw but to see the the back end staff in operation. It might only be a snack video, but it could easily make a full meal. I hope you all have a good day and I hope ZZ liked his tribute.
thanks Robert.
HI Mark and Eddie! Love your sawing
thank you.
Always enjoy watching. You had me wondering for a while cause I didn't hear you tell Bill about putting the taper away. Better late than never, great job guys.
thanks Steve.
Hi Mark & Eddies & ZZ Mark & it's is Randy and i like yours video is cool & Thanks Mark & Eddies & ZZ Mark & Friends Randy
thanks Randy.
My wife and I enjoyed seeing you again at Northern Pike. You 3 are really good people. My wife doesn’t like to have her picture taken, but when I showed her the picture on your video she said, I don’t look to bad with Eddies arm around me , lol . She also said the guy who looks like Santa seems like a nice guy. Sorry Mark, she didn’t even mention you. Thanks for your hard work making videos.
thank you it was great to meet you.
I could tell the Bus Moter was sounding very healthy today!! I was thinking it must be very soft wood. Then you mentioned that you sharpened the blade!
yes it was very sharp today.
Loved the snack video! Thank you , I could binge watch your videos all day. Thanks for visiting with me at Corsica at the fun raiser for Nuts I have a great picture of us.
thanks Kenneth , we had a great time there.
Thanks for the video. No matter what day or time is good to see you processing a log into boards. You are so lucky to have so many subscribers.
thanks Alan.
That was a great video you knocked that log out so quick amazing 👍👍👍👍
thank you.
I like your freshly sharpened saw 'cause I can hear the Jimmy digging in the background better.
that's true.
Thanks Mark, Ugly log makes beautiful useful lumber :)Good snack will tide me over until the next video ty 💯🙏
thanks Barry.
That log made a nice stack of boards. Good job!
Mark, some of the other sawmills cut some interesting logs but, your camera angles and narrations are way better. Keep up the excellent videos!
thank you.
HAPPY MEMORIAL DAY EVERYONE!
thanks David.
Nice, Mark. I needed a snack after working outside most of the day.
Bill
thanks Bill.
Hi Mark. Another beautiful pine boards. John Clark sawn some 6 -1/4s spruce boards & " greenhouse" dried them late March. A few videos back. He made a box. He said: Mark is the better carpenter! As a retired remodeling carpenter and builder of 40 yrs. He did very well. Well. You, Ed,ZZ, & Hank have a safe & fun Memorial Weekend. 😍😊😉👍❤️💜🙏🏻🙏🏻🙏🏻🙏🏻🌲
thanks Lawrence.
Your welcome Mark. 😍😊😉👍❤️💜⚘️🙏🏻🙏🏻🙏🏻🙏🏻🌲
Good Afternoon! Great Snack video, Memorial Day weekend, a time to remember those that gave all so that we can be free. John
thanks John.
hello there mark.it's good to see everyone and they look well and happy.i need to get caught up with ya'lls videos.i missed a few of them.
Five o’clock in the morning some nice straight boards coming off the mill again , off ratting again today good fun and sport it’s very interesting watching them dogs work , one of the few sports the namby pambies haven’t stopped , any way you guys have a nice day
thanks Alex.
Happy Sunday Eve!😊
I like it .
The expertise involved in operating these massive chainsaws is mind-blowing. Truly impressive!
Excellent as usual. The taper that creeps out needs to have the valve for it resealed. No oil should be getting past the valve until it is opened. I would take it in to a hydraulics shop and have them rebuild it, or just buy a new valve and replace it.
I put the taper out and forgot to put it back.
I sure enjoyed watching this series on the swamp road also enjoyed your Bible study at the end
I like watching the big logs. They are interesting and complicated. And they let you show off your skills!
Nice work folks!
thanks Alan.
Love the 1x12 money boards, 😂
yes for sure.
Good sawing nd happy weekend! Blessings!
thanks Lewie.
@@markgalicic7788 Yall 2! Happy whatever!
That was a pretty fair sized piece . It was a little bit more than a snack, for us it was dinner. Nicely done crew.
thanks Anthony.
Love watching board feet come out of those raw logs.
glad you liked it.
I love stop signs! 😍
me too!
High dollar stick, nice boards, thanks for sharing.
thanks Jack.
Great job my friend… have a great weekend ahead
thank you.
Such a tasty snack!
glad you liked it.
Thank you for another great video. Cheers
The round thickness indicator looks @ 12:30 like a smiley face.
Lollll…why is this soothing to me???? It’s a saw!!! Lol
I like it too lol!
Hi Mark love the snacks but really like the 12 coars buffet more ha ha ah :) ,thanks for showing your vids loven them so relaxing for me to watch and just love your commentary as well 100% great :)
thank you.
As usual nice cutting. you made this one look easy. A bit nicer of a log , less denim.
thanks David.
it's actually very good. i love you
Memorial Day. Thanks to all our Veterans who served. Semper Fi.
yes and never made it home.
hi there good looking boards best to all john
thanks John.
Love that blue stain.
many customers like that.
Beautiful log!
thanks Rob.
Yup it was a great snack as usual. Thanks
thanks Kevin.
Great yield from that stop sign mark
thanks Doug.
You do it so easily
thanks Graham.
Nichols Sawmill has an Edmiston Carriage but a Helle saw husk. The sawyer on Nichols sawmill said in one of his videos a few weeks ago.
yes Jason did say that but it's a great mill.
The 'Mustache' Men' are always watching !!!!!!!
that was a beautiful stick of wood. Have made a lot of stuff out of pine in the past, very easy to work with.
Nice snack bless you all n ty
thanks Richard.
pine is mainly structure lumber or siding sticker it thickness
I love blue pine lumber.
me too , many people ask for it.
Thanks for the video !!!!!!!!!!!!!!
@ 15:00 with the hydraulic pressure seems like the dogs could be flat instead of pointed and still hold a cant, but pointed just when working with the round logs/timbers / a system strictly to hold cants would be ideal situation with flat dogs
if the log or cant gets loose we could all get hurt , why would you change something that works great?
Good video Bus Motor Productions
thanks James.
You might consider doing a quick segment to begin a video when you install the new lower dog...I'll bet there are still a lot of viewers who don't realize there are lower dogs also.
I will do a video on replacing them for sure.
Love snacks!!!
thanks Karen.
Your the only guy that talks to his saw.
it needs a good talking to lol!
Just subscribed how often do you have to sharpen the blade and how long do the carbide tips last, enjoy the videos, have a great weekend . Thanks for the people who served to make things like this happen.
Very nice ❤❤❤❤❤
See like I saying they had a bigger saw blade they wouldn’t have to turn the log about four times ! To get a flat spot to get a good flat area to saw the log Into good boards !
they don't want a bigger saw Michael , bigger saw = bigger problems.
52 54 56 inch are the common sizes for circular mills all over the world That’s just the way it is Everyone has to 5 or 6 side a log at some point unless they have a top saw or big bandsaw There’s really not that much more waste it may look like it but most of that being cut off is unusable anyways
10:00 is that considered a cant, even with the wane on it? Or does it have to be a perfect rectangle?
got any idea how many snack hrs on the ol buss mtr love the sawing my dad had a mill
the hour meter was broken when we got this mill.
Have a great weekend everyone
thanks
Memorial Day - Remembering those who gave their all for us to live in freedom.
Niceeeee, they look a bit to dry Mark. Or I'm looking at it wrong ?
they were a bit dry but still good.
How many hours on the bus motor and when was the last time it was rebuilt? How many rpm when you are sawing? We ran our mill in central VA with a similar engine purchased surplus from the Navy. 2 stroke diesels are amazing.
we don't know how many hours on it , I run it at 1800 rpm.
Dobrá práce
If I had waited I would not have had to ask.
is that yellow pine?
My wife is happy to see that both gnomes are in the video! 😂
they just took a little break lol.
oh. and I really don't like Chewy's teeth either LOL but we dance with the partner we brought to the dance
Thumbs up
It’s not a snack it’s a full meal deal🤪👍
this sure was lol.
I got a big ham I need sliced up. For a snack. What would be the charge?
we would do that for free lol.
Let's face it any video that is less than 30-35 minutes long is a snack video!!!
true James.
Mark, question what biggest log in length and how big round will your machine Maximum accept " please comnent back "
we can saw 21' long and the knees open up to 36"
Just noticed that John (Fricknjeep) has been making videos for 15 years!
I like the stop signs. We get to watch you play chess with a log.
Marc..can you give me the name of David’s song you play?
David didn't give this song a name.
Mmmmm good!
it sure was.
💥💥🛠️
Like your videoes
👍👌👏
thanks.
Good evening
good evening.
like that man glitter
you cant saw without man glitter lol.
The funny thing is the stop sign thing is nothing new. It's dang near as old as the blade. Fact is sometimes a log doesn't fit the mill but it still needs to be cut. Logs don't come in one size.
did you sharpen the teeth?
yes I did.
I can't believe no one has left a comment regarding the taper being left in place.
Was corrected @ 10:33
@remmiemax3624 Agree, with very slight consequences.
it's all good.
Keren luar biasa ngikut nyimak
Remember our fallen soldiers who died for our freedom.
yes for sure.
mantul
That _"white pine log"_ doesn't exactly look "white" inside, does it? ;-)
just some blue stain in it.
It's hard to see the laser
I can see it but most people cant.
2 by’s
mesin otomatis semua
flip it for 2by6
any dog s up dogs down for the kids plus booms today
yes sir.
Turn by hand with a cant hook!!!!!!!!!!!!!!!!!!!!!!!!!!
Barry you have no idea how dangerous that would be with this mill , just ask Sammy.
Happy Memorial Day, Everyone!
thank you Dennis.