www.epoxyplus.com Designer Epoxy
Вставка
- Опубліковано 1 жов 2024
- For more information or to purchase products visit www.epoxyplus.com
Designer Epoxy Floor Installation
Use Designer Epoxy (EP-E100) from Epoxy Plus (www.epoxyplus.com) to create these one of a kind dynamic floors.
Epoxy Plus Designer Metallic Epoxy is a three component,
high performance modified cycloaliphatic epoxy concrete floor
coating system.
Its epoxy chemistry provides excellent bonding characteristics.
Typically applied at a 20 mil think single coat (75 SF/gal).
This dynamic blend does not require activator to be sprayed on
the surface to obtain a uniquie and highly decorative look. Specially formulated to give the installer superior working time so that even one person can install one of these designer metallic epoxy floors by themselves as demonstrated in this video. Use for commercial, residential or industrial applications. Makes an awesome one of a kind garage floor.
ADVANTAGES
Essentially odorless
• Create dynamic, exotic look
• ZERO VOC
• High gloss, & color stability
• Low Viscosity
• Long pot life & working time
• Chemically resistant
• No amine blush
• Modified to to be highly ambering resistance
For more information and to purchase products go to www.epoxyplus.com
Why leaving bad comments?? If you don't like it, keep it for yourself.
For information on purchasing products to create this floor contact our office at 551-208-2895
Me gustaría hacerlo , por favor pude indicarme si lo puedo poner directamente en piso de concreto suave,liso etc. y cual es el nombre del producto.Saludos.
Check the $400.00 Foamposite Nikes he wearing he's fucking up...must pay real well
Im going to answer some of the questions that have been asked: this is not paint. It is 100% solids epoxy. We add our metallic mica pigments to it. There is virtually no odor. The installer is wearing soccer shoes. The epoxy levels so the floor is flat. The epoxy being used has extended working time so one person can install a floor without any problems. If you have any questions or would like more information on our products contact us via email at info@decocrete.com
Me gustaria saber si este producto se coloca en cualquier tipo de piso por ejemplo cemento ya endurecido o hay que colocarlo cuando este recien colocado.
"Look what you did to your bedroom floor, all messed up with paint! No xbox for the rest of this month!"
jajja no mames se acabo dos quit de epoxico que en 20 metros jajajja le daria el infarto a mi patron gastar tanto material inesesario
There are several comments that indicate that epoxy floors are toxic and that they are hazardous to install. Our floors are made from quality 100% solids epoxy. There is virtually no odor!
decocrete1 LIES!!!!!!
Good or bad, epoxy has no odor. Polyester has, but is less toxic.
Eve@••• ▪|1
I love the look. I want to do it myself. However your video doesn't narrates what your doin, step by step and timing etc. If you could please email and the itemized products & tools best to use. Any tips and things to be cautious about.
Thank you ever so much.
QUE MATERIAL É ESSEDO PISO? SOUDO BRASIL FAÇO PAREDES MAIS AINDA NÃO TENHO ESPERIÊNCIAS EM PISO PODERIA ME AJUDAR? PARABÉNS
You should have at least told what materials you used. Your floor is beautiful but without telling what it is and the rollers used...this is useless. So why post it?
whats your gauge rake set at 1/16"? Ever use a notched squeegee instead?
Try some spike shoes. $12, worth the investment
This looks awesome..... I would like to try it on my bathroom first than do the main rooms. I wonder if it's slippery?
I never seen epoxy splashed all over like that. Usually its put on at one end and you work your way back so there are no blemishes. His shoes must have left marks. Its hard to see without seeing it up close.
it is to produce the random stone-like effect. If it was a single color it would probably be different.
Beautiful floor, nice work
that is awesome
i would like to see that in ocean colors
Será que tem isso aqui no Brasil ?? Amei o resultado do seu trabalho!!!!
I'm really impressed. I'm looking to do this in a huge room and bedroom. This is the first video that actually makes the project look like something I can handle. I'll be going to your website for more info. Thx
Are you wearing cleats?
without vapor mask youn won't live long buddy :(((
We first poured self-leveling concrete. Then we put down the epoxy.
Over plywood sub flooring? How thick does the concrete have to be?
can you put this over a subfloor
He is wearing spiked shoes!
i want this in my garage but with grey and black and white color!!
Ola, coloca na descrição quais as cores que vc usou e quais os produtos utilizados, sou do Brasil e gostei muito do seu trabalho como nao tem lhe pedir pra fazer pra mim vou ter que olhar seu vídeo e tentar fazer. obrigado ;)
Hello,putsin the descriptionwhich colorsyou usedand what productsused, I'm fromBraziland I really enjoyedyour workas it'snotaskingyouto dofor meI will have tolook at yourvideo andtry to do.thank you;)
Very nice ewwwwe. Not!
The final mirror reflection in the floor clearly shows that the floor is not too flat. If you are posting a video where you supposed to show the best, I'd expect better.
The person who laid out the floor also only shows the application of one layer with color.
When this wears and tears, it will surely be visible, this first layer needs a protective clear and UV resistant layer.
After applying those protective layers, the floor will surely be flat, but it's not shown in the video.
Does it seem weird to anyone else that he just walks around in the stuff? He does cover his tracks, but what if he slipped and fell?
That is amazing!!! It looks gorgeous!!!!!!!!
Thanks for not talking and explaining the process. There is nothing worse than a person giving step by step instructions allowing others to learn. (extreme sarcasm)
This is how you make money. Some things are trial and error. Then profit!
Looks like a fast floor finished and i think it looks OK but if it was my floor to do I either would have cut the edges in with the darker brown with a paint brush or gone the extra mile and removed the base boards. The floor did look good though... did you have any flecks of epoxy on the wall from back rolling? Did you also put a urethane coat on it? or is the epoxy also chem resistant?
So is it possible to apply epoxy coating over marbles or tiles that are a little damaged or have holes in them to save the expenses of taking it off, can you please advice on this matter ??
OMG CAN YOU DO THIS WITH 2 DIFFERENT COLORS LIKE ORANGE N BLACK WITHOUT THEM BLENDING COLORS??
Can you get the same effect out of using two different colors like black and orange or will it turn into some type of brown? Thanx
that is gorgeous
Nope
Hello!
Where can I buy this expoy?
I have concrete floors in the basement do I have to use acid to clean floors prior to doing this look?
sounds like he has his tap dancing shoes on....WTF
3:37 did you fix the scuff in the ceiling?
I think the floor looks great. Thanks for posting. I epoxied my garage floor (grey) and it looks ok, but I think I would like to
redo it with a better looking color. Can you put this over the existing epoxy? I will check out your web site to see what it offers.
Also, to all those haters out there, If you don't like the color of the floor in this video or anything else for that matter, why do you feel the need to express it in such hateful way? Never will understand people like you.
I hope my tenants very see this video. But seriously, it looks very nice.
figures - the guy probably charged an arm and leg for a 6 minute paint job.. make some swirls - call it designer.. looks about as good as - it was hard to do.
This is not paint. It is our metallic blend epoxy.
At 6:01, is that tape near the bottom right of the door? :S
Is this suitable for a DIYer?....have a 200sf room with a concrete floor I am trying to finish.
And just one layer gives you a perfectly smooth surface? Sorry but I'm a bit sceptic about it, especially after seeing the two final pictures (the way the floor reflects the door and the fireplace).
Wow, this show how much I know, which not much about this process at all. Thought the floor looks good, but didn't know anything about what to lay first and how many coats should be apply. I read all the comments and I realise that you really have to know what you are doing with this Epoxy stuff. Thanks for educational comments guys. have a great day.
It's absolutely gorgeous.
Q ES MUDO, XQ NO DICE Q LE ECHA Y DA LOS PASO A PASOOOOOOOOOOOOO
NO tecnics noob worker...
Bernstein Boden 😜
looks like a complete fail
Oi que magnifico este efeito de porcelana,gostaria de fazer na minha casa ,quais os materiais q devo comprar,já faço trabalho manuais,parabéns
I don't see how there wasn't any spillage onto the walls... this was the fastest job ive ever seen! Ive got about 900 feet to do, but the mess is the biggest turnoff. What about acid cleaning, was that done with just the masking?
Very nice
sou empreiteiro de obras como faço pra tornar representante deste produto em belo horizonte e região metropolitana,gostaria de trabalhar com serviço deferençiado
Nice!
wonderful
Extremly unprofessional finishing oO
Hello I'm young I like to have my own business and your work very liked and I'm interested in learning the steps and the type of colors and materials used in flooring work colored bright and I ask you a tutorial in detail and I will be grateful to you Arjumenkm tutorial your work details because he is wonderful with all the details and the steps and I hope his book the names of colors, materials and modus operandi step by step with the time for each step, and I will be thankful you definitely
This stuff is gorgeous
Wish they had this in Australia
Se mira bien
Also, the moisture content mustve been les than 3lbs, bcause yu didnt put the vb5 down first
that floor is ugly asf!
If we're going to be talking about ugly things then mabey you should go look at a mirror
***** thank you for your response, keyboard warrior.
Also, the moisture content mustve been les than 3lbs, bcause yu didnt put the vb5 down first
Nice looks great!
That's ONE Quick floor covering !!
how many coast of epoxy have you used in this projet, and how long do you letit dry between coat
What two colors are these
aberdeen angus coo broon and sheep dip tan
The tolerance is high in this one....
It looks like a flood..
what type of paint plz !
Thats done over Gyp Crete?
not my taste in color but its an awesome way to make a unique floor.
???????????
Sa me donne une idee pour faire ma cuisine
very good!!!
Where can this be purchased? Thanks.
já tem em vitoria esse produto
Maguinifico!!!
Muito legal!
love it
I have been looking for something like this. my spa needs a touch of some awesomeness. I truly think this fits the bill. I will reach out to you during the week. Thank you so much for posting.
Gostaria de conhecer o produto
Você amigos homem feliz fotos famílias!!!!!
Você mulher passeio você amigos homem feliz fotos famílias mensagem celular!!!!!
amem
Você amigos mulher beijos!!!!
Bjs bom domingo
is the epoxy in the paint all ready...
What I'm seeing in the video and a self leveling epoxy? what colors are these? here in Brazil you are adimirados by many professional.
Oh u just answer ?s u want to answer, I get it now, SMDH
nice...
great job
very exciting
Floor looks great
what is the epox to be applied on the floor??
resin
yes but there are various types of catalysts
What about vapor drive?
What is the open time?
If that is epoxy, why weren't you wearing a respirator or have some kind of negative air setup?
love that look. Ive seen a few of your videos, is the last step with the roller important? As It seems to take the sharpness of the paint contrast away a lot which I really like.
this guy i would not hire ever. A he used tape vs puling trim, at least he didnt use quarter round. B:i hate not pulling trim, is a sign of lazyness.
nice!