Boring Bar Setup

[@mattcaesar5781]

Never seen a video on this. Literally just told my guy to do this on one of my lathes 5 mins ago. Yup theyre listening

[@WoosleyMachine]

Please don't tell your guy to do this half ass way of lining up your tool indicate your tool flat with your x axis

[@timgoodliffe]

you dont watch any cnc videos?

[@michaelhansen1650]

​@@timgoodliffehe literally just stated no he he hasn't seen a video on this.

[@peterfitzpatrick7032]

@@michaelhansen1650 Looking at your replies to comments elsewhere, you really are a nasty POS ... 😂

[@BlonnyBoy]

I love the way you used the turning tool to mark and level the boring bar!! Absolutely genius

[@brandonb6164]

Super impressive finish on that ID

[@Jose-in4ui]

Learn something new everyday. 👍🏽

[@joe-downs]

Surface finish on point!!

[@tjprows3811]

smart way putting it on center

[@LU-D1GITAL]

Rifling makes everything more accurate

[@woodstockjon420]

Nice hone job

[@barretharms655]

A simple way to setup and most people don't even have a clue. Lineup is just that easy

[@BrandonHaynesGolf]

Glad I’m not the only one

[@pyro1596]

It'd be hilarious if it just cut to the boring bar disintegrating upon crashing into the chuck

[@brandonrenwick9125]

you see how he modified his tool block to be a split style? thats the other big helper for his chatter free cutting. pretty smart think Lincoln

[@antoniocomesana6232]

Buena 👍 forma de poner la de mandrinar a la altura correcta.

[@Precisionmetalworks]

Pro tip: to check your reference tool (on a lathe w/ c axis), lock c axis, scribe line, rotate 180 degrees, scribe line. Half the difference between the 2 lines is the amount the tool is off-center.

[@balisticsrooster]

This is how I always do it too!

[@robertrussell9014]

Easy Money all day on that lathe

[@abinjose8735]

Why marking on the face?? I'm a milling guy please explain

[@michaelkrier2923]

OD stick tools are oriented by slots cut in the turret. Some boring bar holders have no feature to orient the bar. By scribing a line with an OD tool you have a reference to orient the boring bar against.

[@randymulhern1290]

I'll be using this tip too. Thanx

[@tyknott422]

I tell you what, it’s so much nicer on a mill-turn, lock it in a tool holder tell it what offset of clock the holder to and your off😂, but in all seriousness thanks for the info, I never thought of that

[@dharmeshamrutiya989]

Nice finishing, share your tooling details also..

[@NJUSAWEST]

Set up perfect, i loved.👍👍👍🥰

[@shirothehero0609]

Alright, insert? Material? Comon man. The deets!

[@jakebpau2396]

Nice idea.

[@jorgevelasco5283]

O man thanks for this

[@abcdfgh4321]

Do your bars not have flats or alignment features in them?

[@rahuldafale6008]

It's call center height adjustment for overhang tool like Antivibration Boring bar to avoid chattering problem.

[@user-yv4ly7ix4l]

Я пиздец как тебе завидую, глядя на шероховатость

[@user-mm6pq1uq6h]

Хорошие подшибники шпинделя и огромные скорости обработки.

[@ankithmistry]

Plot twist, vnmg insert is 0.7mm down the centre 😂

[@mychealh4399]

With your bar sticking out that far how do you not have chatter? I'm super new to this

[@DGH12]

Thanks for your knowledge

[@jsaggu23]

Anti vibration boring baar

[@ianunderwood3850]

I was wondering how the hell he managed that without chattering! 👍🏻

[@Michael79ike]

Expencive toy 💪

[@Michael79ike]

@@Jason-gt3ht yeah its true, worked with it every day.

[@M.r.Duglas]

Вдохновило на идею 💪👍

[@JohnWickPerm]

Не совсем понял зачем это все?

[@chriswis2457]

That's pretty good as I am lathe machinist.

[@LJ.]

Hello lathe machinist. Can you explain the line he made. Setting a zero or something?

[@koolmexican721]

@@LJ. The line he made with a solid OD cutting tool is a reference for lining the tip of a ID boring bar insert to center before tightening it down. Never used this method personally but I will try it out soon.

[@shamas-sha]

super bhai nice job

[@HidayatHidayat-vy2lm]

busing Kuningan logam big job

[@ganeshkumar657]

Nice tips

[@brandiarmstrong6562]

Lovin it

[@Years-qy7me]

How accurate do you find the tool probe? I have a renishaw on my lathe and never use it because it doesn't account for the boring bar flex. I always find the first pass is off size. I end up taking a cut, measuring and adjusting the offset anyway.

[@OctaneWorkholding]

Usually within .003" which is a good start.

[@SheppHead]

Keep cut sizes the same size on a silent bar to eliminate variable cut sizes.. don't be going from a mm a side to a .2 finish cut you'll have a nightmare

[@joshuafeldman367]

How do you know your turning tool is on center?

[@OctaneWorkholding]

If it doesn't leave a nub, chances are good that it is very close to perfect.

[@Precisionmetalworks]

Best way I've found is to scribe a line, then rotate c axis 180 degrees and rescribe line. If both lines line up, the tool is on center. If not, measure the distance between the lines and adjust your tool half this amount.

[@joshuafeldman367]

@Precisionmetalworks never heard of this method lol. My preferred way is to move your tool up .020 on Y then make a face cut then measure the tip then adjust for half. In my 20 yrs of lathe operation I have scene more ways than you can shake a stick at lol.

[@saveriocaprioli460]

Usa un compratore e sei più sicuro...... Anche con sporgenze di 10 volte il diametro.... in più dovresti controllare Anche il centro trasversale non solo quello assiale

[@faroukmastercam4395]

Silent tool ❤

[@DGH12]

That mark was already there . How did the mark get there , is that black tape?

[@eternaloptimist2840]

From another tool that was already zeroed in, I imagine.

[@mitchvalentine9988]

Using a scribe line does work, not the best for certain applications and tolerances, especially if cutting to center of a face

[@nickrawson9060]

Or you could use a dial indicator and not scratch your insert along the steel

[@Milk-ni1qh]

ooo chatterfree bars got me actin up

[@user-rk4bl9xf6m]

무진동 보링바 셋팅법인가보군요.

[@haseebqureshir9324]

Yeah ❤I have also this work

[@phd_eng_Marinov]

Silent tool 😎 from Coromant

[@threadtapwhisperer5136]

No "hyah, click!" To mimic the torque wrench?
Tsk tsk, points deducted, may your coolant be 32degrees freedom, just above slushy cold so your parts will be beautiful and chips will be meatly curled but your hands will be swollen and prone to easy cuts.
But only for the first half of a shift, i am not seeking to punish a small infraction as if you had crashed the machine or similar.
Ya gotta make the click sound cuz the universe knows that bolt is tight.
Its especially important when no torque wrench is being employed, as the main function of said wrench is to click to inform the universe said fasteners are snuggled up properly tight.
Helicoils
122:56
"He who hath not clicked the torque is saddled with the broken bolt or loose piece of stock. Never two uggas and a dugga neither crossthreaded is also loctite shall be admissible. Henceforth, mankind shall klick either by mouth or by tool, it is known"
😂

[@lukem280]

It was a bit

[@romanturskyi6814]

Wow

[@cncdan1364]

That’s if the bar doesn’t have a flat or has tool holders like this.

[@D08048]

👍👍👍🤝

[@147369147ful]

❤

[@thecalham]

I cant tell if thats a torque indicator wrech or a atucal indicator dail at the end i wana thow my 14mil key at you. I dont care if "it works" you know better. And better be a finger indicator not a dam plunger

[@user-xt6sj5ct5s]

Кудапалецвдыркусуешь😂

[@ernestgrundeman9534]

You don’t have to do that nonsense if you run good machines. Okuma is the biggest pos machines I have ever ran. Their IGF is hot garbage compared to Mazak Mazatrol.

[@samnagy4062]

This was boring

[@bramweinreder2346]

This is a boring video 🤪

[@TlD-dg6ug]

Looks like some 4140/30 prehard

[@jay_bro8113]

I thought this was common knowledge for machinists? Lol

[@OctaneWorkholding]

No such thing in this trade, you either figured it the hard way or were shown. Common knowledge would be that citrus from lemons can be used as a cleaning product as an example.

[@gar50172]

What is common knowledge exactly? Everything is learned and once a mass learns then it could become common , nothing about machining is common. It’s always interesting.

[@sammorgan31]

It's pretty common knowledge. Anyone worth their salt knows it. You got goobers in every trade.

[@jeepmanxj]

I have boring bars going back 40 years and all of them have flats on them you can run an indicator on that.
What this is doing is setting a line off of a tool that may or may not be centered.

[@jay_bro8113]

@User Name it's a slant bed lathe, not a horizontal......turret is always on center.

[@Gablotescobar]

Standard procedure

[@ilya0ship]

За шо, мне нельзя такое показывать

[@user-nd3ej6xm8c]

на заметку взял!

[@chandradefta4890]

At first i just "why" but later i know "why". Nice tips🫡