Customer States 'My Engine Stalled And Wouldn't Start Up Again!'
Вставка
- Опубліковано 13 чер 2024
- Customer states and mechanical problems in one digestible video for you to enjoy!
In this episode we see what happens when you don't do regular oil changes, some absolutely destroyed engines and sine terrible brakes.
Send us your customer states and mechanic fails videos here:
forms.gle/ybywj6a3SS4Vpvhv5
Or email:
mechanicalnightmarebiz@gmail.com
Follow us on Instagram:
/ mechanicalnightmareyt
Follow us on Facebook:
/ mechanicalnightmareyt
Video descriptions:
0:00 Intro
0:04 80,000 miles they definitely skipped a lot of oil changes
0:13 Guess this rod wanted to see the outside world
0:23 Came in for an inspection and didn't quite pass
0:32 Just a typical day for a farm vehicle
0:41 When you ignore that brake squeak for an extra 6 months
0:46 Will just be a blocked drain hole at the bottom of the door
0:54 Polaris RZR turbo kicked the bucket
1:01 Not going to be doing much charging like this
1:10 Surprisingly a correct diagnosis by this owner
1:20 This is why you don't skip inspections especially on a bus
1:40 How to fix a ford ignition
1:46 At least it will have a new started after it gets rebuilt
1:55 Just a minor exhaust leak
2:00 Definitely a unique way of customizing their car
2:21 Well that must've been terrifying
2:25 The rod also destroyed another hole down by the oil sump
2:39 Just for context it had the same size rims/wheels when this happened
2:45 Customer States "my A-C button is the most infuriating thing ever"
3:09 Customer States "Can you check my bike please, ran fine all summer then for some reason wouldn’t start anymore"
3:13 I'm surprised they thought this sound was somewhat normal. To be fair it does sound like a pulley bearing which may be an easy fix
3:50 Most likely just bent up hitting the exhaust shield
4:04 Outro
#customerstates #mechanicfail #mechanicproblems - Авто та транспорт
Oh, so now you're gonna make fun of someone because they topped off their door fluid?
🤣😂👍
😂😂😂😂
😂
"Another Shop worked on this door, I think they forgot to add up the window lifter coolant."
That’s the reserve reservoir
Bet that brake rotor just started making a noise too.
1:46 The door buzzer going off without the key is being caused by a little wire that is supposed to be connected to the accessory position of the key coming out of its spot and grounding out on the column. Fixed it on a '97 Ranger I had a while back.
I love the percussion maintenance approach. 😅
In 1979 i owned an Amoco station. I was 24 years old. One of my customers had a 1956 Pontiac in towed in because it wouldn't idle and ran terrible. The one bbl carburetor was completely worn out the throttle shaft had worn out the base so nad there was an eighth inch gap between the shaft and the cast iron base. So i went to the parts store and got with the best parts guy ever anywhere. The base had a wide span between the mounting flange holes. We went through the books and found a 450 CFM one bbl for a 292 Chevy truck carburetor would fit the base. I went back to the shop and dissembled the carb and bored the jets another 2 thousandths and installed it on the flat head 8 cylinder engine and went ahead and replaced the points and condenser plugs and wires which were worn out. The car ran perfect i raised the timing 2 degrees for a little more power. The customer sent all of his friends to me and I stayed very busy.
That AC button managed to set my anxiety levels to a record high and I don't even own the thing.
Common Volvo issue
My radio volume knob does the same thing. Now I use Bluetooth instead and control the volume from my phone.
Didn't they figure out fan speed knobs DECADES ago? Seriously wtf
I mean, they did dude, but they still break. The number of times I've had vehicles come in because they only go on full blast or nothing at all isn't that small. I will say that one is a head scratcher though. Probably electronically controlled rather than an actual piece you're moving like with older vehicles and something went wrong with one of the components.
I believe that if you go to a shop with brakes ground down to nothing you should have your license suspended.
unfortunately i had an older sister who did it several times,her idea of maintenance was to just drive it until started making a loud grinding noise and then tell me something's wrong,usually a holiday weekend and you can,t get parts
I admit I thought those pictures of cars that have not had the oil changed in a long time were a little bogus . On a lark I asked our local Toyota dealer if they ever see a sludge pile in the oil pan. He said “all the time”. They get on average 2 per month. I stand corrected.
And its always dudes that try to work on their cars
Thats why I get skeptical
I literally wholesale refuse to believe that someone who works on cars has no mind to change oil.
When I worked for GM, a customer came in with a locked up engine. No oil changed or added since new, and now died at 50,000 miles. When she was asked why she never changed oil, her reply was I never did on my Hondas, so why should I do it on this car.
@@robertheinkel6225OMG.. facepalm on top of a facepalm
That infinity sounds like its got a bad idler or alternator or something. Id try to confirm that snd if they knocked it down enough id go for it. Could be a $100 fix
The answer to “should I buy this Infinity?” Should always be “NO!”
About the air conditioning knob issue at 3:04 is where they are using a rotary encoder to send commands to the computer. I had the same issue with one of the knobs on my 2004 Focus. The control needs a squirt of contact cleaner. Sold at most any electronics supply shop. With an all too easy to lose little red tube just like on spray lubricants. It only needs a drop in the right place in the control. But getting at the control is a horrid job. So as a long time electronics engineer with too much experience, really not wanting to pull out the heat unit and open that up, I pried off the knob, squirted a whole lot of contact all over the shaft and rotated it back and forth. You can do this with the power on. Then after about 4-5 turns the control worked normally. Now this is a desperation move but it is worth a try before ripping the dash open. I did not expect to to work.
But the shaft for these controls do have a few thou clearance with their bushing and by flooding the shaft with enough cleaner, enough got in by chance to remove the contamination in the control in my case. You may or not have the same luck.
4-5 years later when I gave the car away to a friend in 2021 it was still working fine.
The AC knob not working properly is a common failure for rotary encoders, happens a lot on Hi-Fi's and musical keyboards.
That’s why I got the potentiometer edition. ;P
@@JeepinBoon LOL!
I would've thought they'd figured out fan speed and volume knobs DECADES ago, but I guess they decided to break what wasn't broken yet again.
@0:13, what's the problem he changed the oil once in 1975. Great video.
Thanks for all the laughs. This is one of my favorite episodes. ❤🎉😂
That sticker car is actually super fun. I would also look forward to seeing the customer's new stickers and working on their car.
The tire off the bus was 😮 that has been wore out for long time.
That was my video submission. I will find tires on busses like this far too often 😅.
had a similar thing like that when i was a transit bus driver,walked to the terminal to start my day and when i did my walk around i found a right rear tire like that and a front tire with a bubble in the tire-i called and was sent a replacement bus,the shop told the supervisor who found out who had it before me and why he didn't check the bus before taking it out
@@RedArwBus Maybe that previous driver did a burn-out while returning the bus to the depot?
0:54 The new 'free floating' style turbo.
HAD to comment on the "rattly alternator".....sounds like...."place your bets"....yep, a ROULETTE WHEEL !!!
1:35 The wear indicator fabric - when this starts to show , it's almost time to fit new tyres
Best morning ever when a new video drops.
Was not disappointed. Keep up the great work. Thank you for always making me laugh.
That Infinity is fine. Probably just needs a pulley or maybe a power steering pump, and you're good.
Nothing about that sounds like lower or upper end failure.
I was thinking ac compressor.
I was thinking idler-pulley bearing has gone, but you'd need to check by using a plastic hose held to your ear to determine where the sound is coming from!
2:46 my keyboards volume dial right now
I think that's a record number of grenaded engines for one episode.
People Rod the piss out of their vehicles and they’re surprised to see the damage they’ve done…..🤪🤪🤪
Why would I tell the mechanic there's water in my door, when I take it to get the oil changed?
the one with the bad fan knob, just pull the knob and spray something like deoxit in there. its just dirty.
2:56 AC button is on a Volvo XC90, mine does the same.
Spray canned or compressed air behind Volvo control knob - fan motor
0:10 That oil seems contaminated by hydrocarbons and water.
That Infiniti sounds like a milling machine, and probably is
Personally I think there's plenty of smoke left in that tire.
I'm favoured, $60K every week! I can now give back to the locals in my community and also support God's work and the church. God bless America❤️❤️❤️
Long term investment is the best now. I invested $20,500 with Mr Williams and i top up my trade with $500 every week. Now, I'm having over $147,345 on my dashboard. Toping up your trade is really important..
The smiles on my family's face is heart warming, every week when I give the news that our $40,000 weekly profit have been received to our digital assets portfolio.. God bless Mr Williams brown and he's trading services
So delighted seeing my broker talked about , This was exactly how I got recommendation about Mr Williams brown, At First i was a bit skeptical but eventually I gave him a trail with my little investment and I got huge profit.