Dude I keep thinking I’m going to do this for my 2011 W212 coupe. You helped me do a few things on my own but WOW I don’t know if I have the fortitude to tackle this. I’ll probably watch this video 100 times and bit off on this project next Winter maybe? Keep the great vids coming. Love what you do - cheers)
Pleased to hear that my videos coming to use. Is not really that hard, is kinda seems messy with all the cables but when you have it in front of you is really easy to understand and execute. Best advice I could give is not to stress when doing the install, prepare for a full day with all the steps and testing the device before assembly. Be careful when removing the screen if you choose to put the unit back there. Most installers seems to put the unit behind or under the glovebox but is probably same amount of work if not even more.
Thank you buddy. İ have NO ideas about cars and electronics. You helped me to save 150 Euros but especially to make my w212 sweeter as it already was. Sağol garaş.
You don’t have rout the AUX cable to the center council. Just use the cars original Bluetooth 👍🏻. Audio quality is great since I am still using the original Bluetooth and I could still play music and answer phone calls from car play 😁
I have a very similar unit added to my C207 ntg, and found the screen blanks intermittently. I have asked the installer for advice, but his reply is take a pic of the screen blanking out, which is difficult to do whilst driving? Is it a fault with the unit or a wiring issue?
I have this kit. I have tried to fit a couple of times but I cannot get the radio unit to go back far enough I assume it is the double connecter is jammed behind the unit, any advice olease
Do you know if original ami/mmi port in glovebox gets de activated when installing this box. It used to work using aux cord but now it doesn’t work anymore after installing.
I don’t know usually here all W212 come with AUX and that’s no needed to use for any aftermarket install such as CarPlay or Android screen. So I think is other configuration over there.
Thank you for this very nice and detailed video. Is there a specific detail to identify the correct NTG model of my Audio 20 (SA Code 523) system in my C Class W204 (year 2012)? Also there is no reverse cam in my car. If I install a cam will it be possible to use it with the trajectorie markers and parking lines etc?
Got that module from eBay today. Instalation wasn't difficult at all but I was not able to get sound out of it. I did set the AUX to on on the engineering menu but nothing happened and connected the jack to the ami port. The module got blazing hot, beyond any safe threshold for operating an electronic device on a enclosed space. Lost audio from my radio. Then, it startet rebooting. Don't know what to do...
Hello, the theft protection has been activated on my W207. Would it still work? My radio is unusable and I'm looking for an alternative. So does the carplay necessarily need the radio?
hello thank you for sharing , do you think that is safe to install it behind the screen ? Is the temparature very hot in that area ? is there any problem when the outside temperature is showing 42°C ?
I'm looking at the reviews. Why are so many people saying that it dies after a few months? Is it because the dial switches get knocked while being in the car? I need some reassurance for this buy
does this technically also replace the head unit? i have subs in my mercedes’ but they don’t hit well because the stock headunit, so if i where to do this, would it solve that problem?
Thanks 🙏 Yess you could find some for NTG 4 but not from this particular brand. mbworld.org/forums/e-class-w212/794234-diy-kremersino-wireless-carplay-ntg4-0-a.html
Det du gjorde blev riktigt bra. Jag hade gärna velat göra lika på min E 250 men vågar inte ge mig på detta jobb. Kanske till våren, man vet aldrig. Kanske kan få lite mer tips/hjälp från dig. Beröm för det du gjort 👍👍
Parking sensor and camera works as normal. You could chose in the setting if you like it to switch to original camera display when you put in the reverse or you could have it on aftermarket camera for CarPlay decoder. For my audio 20 system is not possible to add rear camera without this decoder, so is great 👍
Hi I have just installed this on my car but I have no sound or very muffled sound coming through I have set aux up in engineering mode but it’s like the aux isn’t sending any signal any ideas?
NTG 5 audio 20 and command, but I may do the video without them, and I still need to do more research, these system is really confusing to understand 100% and I want to get the information as accurate possible.
Watching videos like this at midnight when i dont even have a car is quite fun
One of the few interior upgrades I need to do but love how informative these videos are
Car feels way more modern and still original that’s what I like with this. 👍
@@MB212 exactly 👌🏾
Visible confirmation that I will leave this to the professionals
It’s not as complex as it seems once you get into it.
Just got a W212 and found your channel. Thank you for making great video resources for this awesome car!
Thanks for watching more content coming as always 🔥
Same 😁
Dude I keep thinking I’m going to do this for my 2011 W212 coupe. You helped me do a few things on my own but WOW I don’t know if I have the fortitude to tackle this. I’ll probably watch this video 100 times and bit off on this project next Winter maybe? Keep the great vids coming. Love what you do - cheers)
Pleased to hear that my videos coming to use. Is not really that hard, is kinda seems messy with all the cables but when you have it in front of you is really easy to understand and execute.
Best advice I could give is not to stress when doing the install, prepare for a full day with all the steps and testing the device before assembly.
Be careful when removing the screen if you choose to put the unit back there. Most installers seems to put the unit behind or under the glovebox but is probably same amount of work if not even more.
Thank you buddy. İ have NO ideas about cars and electronics. You helped me to save 150 Euros but especially to make my w212 sweeter as it already was. Sağol garaş.
Wow it’s great how you film the details! 🙌
😍😍😍😍
My Man, You are simply THE BEST
Thank you. I'm about to install one of these and that was very helpful. I'm always nervous about removing trim.
Always an excellent video quality and clear tutorial for beginners
Thanks for the tutorial, the manual was lacking, it didn't mention moving the fiber optic cable from the factory harness to the new one.
Why do I watch this? I don’t even have a MB 😖
Get one, you'll love it
2009 W212 for starters, beast of a car.
Alex S - lol. I ask myself this all the time on UA-cam!!!!!!!
🤣 🤣 🤣
Getting one
Youre videos are so helpfully by part changes by my car👌🏻👌🏻💪🏻😁
Thanks bro appreciate it 🔥
Amazing! The indicators from the give away will fit perfectly for my estate :)
Very nice. No music and no comments! Good work!
Great video as always! I will re-route my unit behind the screen over summer! Amazing quality
That spot was excellent and kinda easy to remove the screen after all ☺️ Thanks bro 👊👊👊
Did you managed?
Nice video and good luck to everyone!!
Great video - We install the same upgrades over here in the UK!
Could you do this in mine ?? 😀😀😀
Absolutely perfect video.
tanks for all videos,you make my life more easy
Comments like this make me continue 😍
Very useful, easy to install. The information was excellent! I will recommend it to my friends.
Thanks appreciate it 🔥
I'm vietnamese
I love your video
A very educational video as always👑👏👏👏
Is there a way to install usb cable on the front of the panel where those 4 buttons are at next to heated seats ?
Love you'r channel from finland❤️
Been thinking about doing the same install, if I end up doing it this will be very helpful
Go for it, well worth money spent. If you have any questions don’t worry to ask. I try my best to answer them 👍
Excellent video as always 👍
I SAW THE W212 THE GOOD ONE MODIFICATION AT THE KARARANGGES CHANNEL
Sir hopefully you can show how to mirror iPhone so that the COMAND Knob won’t be always used. Thanks so much Sir😇🙏
Amazing video, thank you. I’m new to this and with your video I want to give it a try. Which tools do I need to get the job done?
I’d love to win those lights for my w212 😊
Hi MB212, by any chance do you know the name and part number of the TORX 20 screw use to lock the radio unit? Thanks.
That's awesome upgrade, I need to order it too.
Herlig video! Love all the way from Norway 👍🏾
Thank you, very informative!
You don’t have rout the AUX cable to the center council. Just use the cars original Bluetooth 👍🏻. Audio quality is great since I am still using the original Bluetooth and I could still play music and answer phone calls from car play 😁
what did you do with your aux cable in the end?
@@swaagadohnn not connected to anything.
Same here no need to use it! Don’t really understand why it coming with the kit.
Sir I’m worried about the reverse camera coz it might not work? Also I use Bluetooth so if I install this would it still work? Thanks
@@johnparkerzabala yes. Both should work just fine
I have a very similar unit added to my C207 ntg, and found the screen blanks intermittently. I have asked the installer for advice, but his reply is take a pic of the screen blanking out, which is difficult to do whilst driving? Is it a fault with the unit or a wiring issue?
Great job! Best video I've seen 👏
Thanks 😍
My 2013 E350 Bluetec has a rear camera. Do I have to do anything with the yellow cable or just leave it.
I have this kit. I have tried to fit a couple of times but I cannot get the radio unit to go back far enough I assume it is the double connecter is jammed behind the unit, any advice olease
Got this kit and I love it!
Kit still working well?
Yep! Used it today
Just bought mine right now, question: the back up camera still working as always with the yellow lines and everything?
Do you know if original ami/mmi port in glovebox gets de activated when installing this box. It used to work using aux cord but now it doesn’t work anymore after installing.
I don’t know usually here all W212 come with AUX and that’s no needed to use for any aftermarket install such as CarPlay or Android screen. So I think is other configuration over there.
una imagen MIL PALABRAS gracias desde España
Hello. I have w212 2012 but it doesn’t have the Bluetooth audio. Did this carplay have Bluetooth audio?
Yess Bluetooth and WiFi
Nice and straight forward!
Cool 😁 Great jobb from 🇧🇻
Thank you for this very nice and detailed video. Is there a specific detail to identify the correct NTG model of my Audio 20 (SA Code 523) system in my C Class W204 (year 2012)? Also there is no reverse cam in my car. If I install a cam will it be possible to use it with the trajectorie markers and parking lines etc?
Thanks for this video, how you did fix the decoder, so it wont make any noise while driving?
Got that module from eBay today. Instalation wasn't difficult at all but I was not able to get sound out of it. I did set the AUX to on on the engineering menu but nothing happened and connected the jack to the ami port. The module got blazing hot, beyond any safe threshold for operating an electronic device on a enclosed space. Lost audio from my radio. Then, it startet rebooting. Don't know what to do...
Did you end up fixing the no audio problem from changing the engineering settings?
Great vid bud! 😀
Hello, the theft protection has been activated on my W207. Would it still work? My radio is unusable and I'm looking for an alternative.
So does the carplay necessarily need the radio?
Have to try this one day.
hello, I have GLK 350 2012, on the link there is 2 options 4.5/4.7, or ntg 4, which one do i need?
Thanks for helping us with your great videos! 😃🙌
Thanks for watching it make me continue these videos 🤟
Thank u for video . My car dnt have any plug for aux and any option in headunit menu !!! Is that problem?
hello thank you for sharing , do you think that is safe to install it behind the screen ? Is the temparature very hot in that area ? is there any problem when the outside temperature is showing 42°C ?
thank you so much still a great video.
Is this CarPlay only for the updated command system. I have the w212 e350 2011 but it’s just before they changed to the coloured cluster screen
Thinking about doing this in my 2010 e350
Do it 👌 Well worth invest!
I'm looking at the reviews. Why are so many people saying that it dies after a few months? Is it because the dial switches get knocked while being in the car? I need some reassurance for this buy
Back when I did this mod I put the box on top of the glove box to avoid over heating
I would like to know if this is possible for the W 204 I am from South Africa I don’t know where to get the package for Android
Cool man Ill do this for my E350💣
Hello! Friend. seat air compressor not working. can you show this
Does it works the maps on the screen without net or it should have wifi, how can work the maps navigation pleaze?
Is there also a Product like this with which you can connect your android wireless?
Nice tutorial ! Ty. :)
Thanks for watching 👊
does this technically also replace the head unit? i have subs in my mercedes’ but they don’t hit well because the stock headunit, so if i where to do this, would it solve that problem?
As usual - amazing video!
Do you know if there is a carplay system for NTG4?
Thanks 🙏 Yess you could find some for NTG 4 but not from this particular brand.
mbworld.org/forums/e-class-w212/794234-diy-kremersino-wireless-carplay-ntg4-0-a.html
@@MB212 perfect guide, thanks... How can I find which ntg I have?
Is kinda tricky to write how you see it, but I can tell buy the look of the stereo unit and the screen. Send me pic on Instagram (mb212_hobbymechanic)
Thanks for sharing It.👏👏👏
Doing the best I can bro 👊 Thanks for watching 🔥
Det du gjorde blev riktigt bra. Jag hade gärna velat göra lika på min E 250 men vågar inte ge mig på detta jobb. Kanske till våren, man vet aldrig. Kanske kan få lite mer tips/hjälp från dig.
Beröm för det du gjort 👍👍
Hi, how does it works with parking sensors and cameras? Does it enables its automatically by itself or you have to switch it on manually? Thanks
Parking sensor and camera works as normal. You could chose in the setting if you like it to switch to original camera display when you put in the reverse or you could have it on aftermarket camera for CarPlay decoder. For my audio 20 system is not possible to add rear camera without this decoder, so is great 👍
HI! It was really big how you installed this! Thank you for the show!!!!
Do you have a kit for a W204 (2009 Mercedes C350 with flip up screen / navigation?
Do u recommend specific site or brand for apple play devices
I have a e63 2015 and I want to upgrade the screen ❤
Go for it, is a pleasant upgrade without affecting the original look. The one I installed in this ride was great quality!
Nice tutorial 👍👌
great great great video, thank you.
Great video but the white captions are hard to read. Maybe try yellow or orange?
I got you, when edit them on laptop is easy to read but when checking on phone is quite hard to read them. Need to try another color 👍
Great comment after you wrote this I used new text more easy to read 👍
hi friend, why do you have this USB port that you left next to the bank, I didn't understand its usefulness
Hi I have just installed this on my car but I have no sound or very muffled sound coming through I have set aux up in engineering mode but it’s like the aux isn’t sending any signal any ideas?
Sorry I don’t know the answer on that. Mine goes directly with Bluetooth and WiFi.
Any overheat issues putting it up top with screen?
Well shot and easy to follow video. Will this work for those of us that don't us Crapple?
Wish there were a vid for the 216
Do the steering wheel controls stil function? and the display in the cluster?
How do i know which ntg system i have on my mercedes 2011 e200?
Great video!
why wireless dont work?
Installation looks so easy on UA-cam (only)
I would say is not that hard, obviously it not going as fast on the video but everything are pretty straightforward.
Hey the audio in my comand system isn’t working. Do you think if I install this it would work or does comand need to be working
Probably would not help to install this.
Bonjour excusez moi je veux te demander est-ce que je peux monter un écran qu'on vous sur ma mercedes w 212 j'ai un audio radio 20
Did you DIY the pulling hooks?
Yess from welding sticks 🙈
My W212 is from 2009 with the Comand Online. Will it work on that too?
Great video! But I have no idea what you’re doing! Better I’ll be doing it in an Mercedes garage!!
Thanks! Ya if you not feel confident about to install it home better to leave it to mechanic and they do it 🤟
Thank you, well made!
Hi you are the winner in the giveaway of the dynamic mirror indicators send me a email on om651benz@yahoo.com
@@MB212 I sent you an email;)
great job
thank you again
would this work with a model without the navi button?
Can you get me the link to buy this product?
C'est possible d'avoir la référence et le site d'achat pour Mercedes w212
Can u do a video about the differences of the ntg 4/4.5/4.7. And how to tell them apart
Is actually in the making but still missing some photos of the different systems for the video. But it coming sooner or later 🙏
@@MB212 what pictures are you missing?
NTG 5 audio 20 and command, but I may do the video without them, and I still need to do more research, these system is really confusing to understand 100% and I want to get the information as accurate possible.