Instead of using air dielectric, have you thought about just printing that as part of the fixture? I was just looking into doing this. PLA has a dielectric constant of 3 to air of 1; PLA dielectric breakdown is 30kV/mm to 3kV/mm for air. This should increase power handling and decrease capacitor size for the same capacitance range.
Interesting idea. Can you please explain that a bit more. Where can we place printed PLA plastics parts? Between the stators? You can email me at erhan@ta1lsx.com
@@TA2WK-TR I was thinking of printing the stator and rotor vanes directly and at the desired thickness (100% infill of course). Copper tape the plastic. The overall configuration probably wouldn't be rotating butterfly though. However, since you've already laser cut both, perhaps print just inserts into the air gap.
Long term durability is questionable. The plate and shafts should be silver plated and brazed together to prevent corrosion from forming. Corrosion will cause higher plate to plate resistance.
Nope. I use 304 grade stainless steel plates and rods and high grade aluminum plates. I have a few caps for my own use for more than 2 years and nothing happened yet.
Thank you and appreciate your effort. Greetings to you from Turkey .
Teşekkürler, 73
Thank you for the video, and especially the links to sources and printing plans. Great project!
Very nicely done! I will be contacting you soon on Etsy!
Instead of using air dielectric, have you thought about just printing that as part of the fixture?
I was just looking into doing this. PLA has a dielectric constant of 3 to air of 1; PLA dielectric breakdown is 30kV/mm to 3kV/mm for air. This should increase power handling and decrease capacitor size for the same capacitance range.
Interesting idea. Can you please explain that a bit more. Where can we place printed PLA plastics parts? Between the stators? You can email me at erhan@ta1lsx.com
@@TA2WK-TR I was thinking of printing the stator and rotor vanes directly and at the desired thickness (100% infill of course). Copper tape the plastic. The overall configuration probably wouldn't be rotating butterfly though.
However, since you've already laser cut both, perhaps print just inserts into the air gap.
Nice job.
Thanks, excellent.👍🇬🇧
Nice work.
Nice work!
Whats min and max pf?
It depends on number of plate sets. Email me I can send you pf table erhan@ta1lsx.com
Wooooooooow super LIKE👍
what is the plate thickness and what metal please?
Its 1mm. I have 5mm and 6mm spacers. So they give us 2mm and 2.5mm spacing.
Hello, can bay the aluminum plat from Chile ??
Yes, you can order from www.ebay.com/str/TA1LSXStore or email me how many plates you need? erhan@ta2wk.com
god job
Long term durability is questionable. The plate and shafts should be silver plated and brazed together to prevent corrosion from forming. Corrosion will cause higher plate to plate resistance.
Nope. I use 304 grade stainless steel plates and rods and high grade aluminum plates. I have a few caps for my own use for more than 2 years and nothing happened yet.