3 Wood working Tricks / Tips..
Вставка
- Опубліковано 9 сер 2017
- Hey Friends,
In This Video I Will Show You 3 Tricks Used By Carpenter. This Tricks Are Very Useful in Wood Working.This Trick Reduces Many Of Our Problems When We Work On Wood. If You Like This Video Then Click On Like And Subscribe My Channel.
Visit My Official Website : mistrymaketool.com/
Follow Me On Facebook - www.facebook.com /mistrymaketool/
* Top 5 Cordless Drill *
1. DEWALT DCD776C2 18V @ 14500/- :- amzn.to/2xWNoDf
2. Bosch GSR120-Li 12 volt @ 6129/- :- amzn.to/2yhooTh
3. Hitachi DS12DVF3 12V @ 11660/- :- amzn.to/2hkeBbR
4. Makita DHP453SFE 18V @ 20412/- :- amzn.to/2xVDNN1
5. Black & Decker GCO18SB-2 18-Volt @ 13201:- amzn.to/2hmgUv8
BUY LONG SIZE JIGSAW BLADE 4.6"
Amazon : - amzn.to/2vUuLPv
* Best Useful Wood Working Equipment *
India Flat Drill Bit Set For Wood :- amzn.to/2y812DR
Hand Wood Carving Chisels Knife :- amzn.to/2ysJqhN
Montstar Metal Try Square 6 :- amzn.to/2y8ZIk4
Wooden Block Plane With Steel Blade :- amzn.to/2xA1TK3
Ketsy 603 Home Tool Kit :- amzn.to/2hvKe2s
10 Pcs Plastic Handle Needle Files :- amzn.to/2y86pCU
adjustable 30~120mm Hole Saw :- amzn.to/2y7UzIN
Safety Goggles and Dust Mask Combo :- amzn.to/2wjXLwq
Multi Position Earmuff :- amzn.to/2hwj3Va
* Best Electric Circular Saw Machine *
Bosch GKS 190 7-inch Circular Saw :- amzn.to/2hxOGxn
Black & Decker CS1500 Watt 185mm :- amzn.to/2xC17fS
Hitachi C7SS 190 mm 1050-Watt :- amzn.to/2k4Puem
Skil 5301 Circular Saw 7inch 1300w :- amzn.to/2xw79AR
THANKS FOR WATCHING..
Music:- Elektronomia - Fire - Навчання та стиль
For those wondering about the blunt nail. My dad was a carpenter for 40 years and taught me that trick when I was a kid. According to him it works by crushing just enough fibers ahead of the nail as it drives through rather than completely splitting all the fibers outward so the wood has LESS of a chance to split. It works most of the time but not 100% of the time. Dad taught me a lot before he passed away a few years ago.
F to your legendary dad
Yeah what else did he teach u? Maybe we can learn from him to.
i tried it simply and by the blunt way and the with the blunt way it cracked 50%less thanks a lot to u and ur Father
plz tell more tricks so we can increase our knowledge
Your dad is a legend
I've been a carpenter for a long time and dulling the tip of the nail really does work that well. It's not a trick many people know. Also tool oil on a screw helps the same way soap does. That's usually what's more readily accessible to me on a job site. Thanks for the great videos!
A good craftsman never blames his tools!
And a broke craftsman makes his own tools from scratch :)
@@CuttySobz A bad craftsman(workman) blames his tools!
Yup
Yeah, but a /really/ good craftsman knows when his tools are actually to blame.
You don't have to flatten the tip of the nail. Look closely at the point of a nail two sides are smooth and 2 sides are Sharp. When you bang the nail into the wood make sure the sharp sides of the nail Point are cross grain and they will cut the fibres instead of splitting them. Also you can use soap as a lubricant for sliding wooden drawers Etc
Avérez-vous remarqué? Quand il termine le premier bout de bois n’est contact avec rien contrairement aux deuxième…..😉🤠
This is a solution among many ways to do better. But thank you so much for sharing the channel so that we will be closer together.
Đồ Gỗ La Xuyên first trick dump
Your English is very good
First it's a user name for somebody..
Secondly you are like 🙊🙉🙈
Đồ Gỗ La Xuyên i77b09 h896bf0 0
Đồ Gỗ La Xuyên I y sx
I like how he hangs wood over edge on first video, then does it with solid surface underneath it
Exactly. Also he was hitting the first nail harder, which also makes his point invalid. Best thing is not taking a gamble and pre drill a tiny hole before using a nail or screw.
I was thinking the same too.
pooi
@@PANTA-Music so the blunt nail isn't a thing at all? I get those splits lots of times and pre-drilling takes a lot of time, so a shortcut would be GREAT! Any tips if the blunt nail isn't a thing?
Try it. It works . When you hit the tip of the nail like that it doesn't split the wood. Im not sure how it works but it does.
Blunting the end of a nail does definitely helps, I've used that technique for years.
He made sure the first one would split by hanging it over the edge of a raised radius edge. He probably would have split the board if he had done second blunted nail the same way. Let me say it again the blunting end of the nail is pretty good technique that I've used for years.
I like the suggestion of making sure you line the x point of the nail isn't lined up to encourage the splitting.
My favorite technique if time is provided, is take one of you're new straight nails cut the head off and chuck it in a drill and pre-drill a hole in the board. Make sure you support the board flat down on another piece wood. If you hold the board in your hand you can split using this technique. It takes extra force to use a nail to drill holes in wood. Make sure the nail your using is straight and doesn't wobble in the drill chuck.
These DIY UA-cam videos are the best. Can't ever skip the video without liking it.
When I was an apprentice carpenter over 50 years ago we,we're taught to stand the head of the nail on something solid, such as concrete or steel, and tap the pointed end of the nail and flatten it, not too much, the nail will then cut through the timber. This only really works on softwoods such as pinus radiata, you need to drill a pilot hole for hardwoods and hard softwoods. Please note that not all softwoods are soft and not all hardwoods are hard.
The second nail isn't hammered in as far as the first, and is done over the hard surface. The second screw goes into the softer lighter coloured wood. Just use a drill one size up.
That trick does still work though.
Blunting the nail is what made the difference. Instead of pushing the grain apart and causing a split it tears through the wood fibers.
Source: I'm a union carpenter since '07.
Edit: Also, don't predrill for nails. They hold in via friction. If you remove material you remove friction. Conversely, yes, you should predrill screws to the size of the shaft. The threads do all of the work, so you don't need the friction of displaced material.
Ye, you can also see that the second nail also made this pece of wood crack ;) Personally i just use thinner nails for small pices of wood... Edit: *for thin pices of wood
@@jutub3662 - That's not how it works. There are different nails for different jobs, and a correct size of nail depending on the thickness of wood that you are nailing through. If you choose the wrong size fastener, you risk your piece falling apart and hurting someone during use.
@@JCPRuckus Well, i am hobby-carpenter for few years, and i have made many different things out of wood- from furniture to carved spoons . I just wanted to sed that in this particular example, i would use thinner nail, "small" wasnt acurate word indeed, i should have written "thinner pices of wood" ;) Maybe the method showed on video really works, i have never tryed it, since my nails cause cracks in the wood extremely rarely :D
Very smart! Thank you for sharing these helpful ideas with us 🖒
Tip - use an old toothbrush to clean residue off sandpaper, and it doesn't damage it.
Or throw it away and buy a new one
Yeah, any brush would do - that was a little hard to watch.
Gostei das instruções do vídeo. Muito bom.
Obrigado.
On diamond pointed nails you can rotate the point so the wider part cuts across the grain. Run a nail or brad through your hair to put grease on it. Blunting does work, too. Of course pre-drilling works but keep the hole undersized a bit. You can take a wooden dowl, saw a kerf down the center then insert a sheet of sandpaper and it works even better because it maintains uniform shape and provides bearing surface. The rolled up paper shown causes uneven holes. Blow guns will shoot a nail in that often follows the grain causing it to blow out the side. Even just following a curved grain reduces the exposed nail shank reducing holding power. You can still buy cut nails down to brad sizes from Tremont.
I'd be lying if I didn't learn something from this video even if it was very obviously a good solution. Thanks for the vid! The soap thing I'm gonna try when I start my next build soon.
I like how u showed the thumbnail right in the start
😀
This is a great example of "THE BLIND LEADING THE BLIND"
Hi Mistry -
I am a carpenter myself, and I've gotta say: this video is plastered with things a carpenter wouldn't even think about doing . From wrong screws to wrong use of drilling machine - I would recommend doing "tips" videos on things you have a clue of.
Two of the tricks I knew but that sandpaper one was a good one. I'll put that one away for later, thanks!
Wonderful and amazing!
Thanks for your good information
I learn that nail trick over 40 years ago from my dad when my brothers and I help build my dads back house. A nail tip will wedge through wood splitting it if your close to the edge and if you smash the tip it rips through the wood with out splitting. It's simple.
If you wanna REALLY be surprised wait'll you see what happens if you grind the point off of the nail completely FLAT... and THEN go to hammer it into the wood, just make sure you have some scrap-wood directly under where the nail is going in untill it starts to come out the other side!
Or for a neat trick with finishing-nails when putting up molding, Chuck them in a drill and spin them completely through the molding and continue Drilling the nail In 3/4 to 4/5ths into the wood below the molding, then Hammer it in ALMOST the rest of the way and finish with a countersink! You'll never split the molding again cuz the nail drills its own pilot-hole!
Lio Alan i was taught the same as a kid and whenever I have issues with the boards splitting i blunt the nail and it usually helps in soft woods hard woods generally need drilling though Happy Woodworking David
Use bees wax instead of soap. I had been taught that soaps are hydrophilic and will pull moisture out of the wood next to the screw causing rust and corrosion.
What about using candle, instead?..
Few people are likely to have beeswax around the house. Everyone has soap.
Floorwax also good.
@@invisiblegrey4953 ,please
As a beekeeper I build many honey frames which are made of thin wooden components. The blunt nail absolutely works. Instead of the sharp nail piercing between the wood fibers and splitting the blunt end breaks the fibers eliminating the splitting.
Very useful for me, who start learning about DIY work
Muy práctico, excelente.
Learned the nail trick in my 1964 shop class!
Today I've had a crack like that. Next level videos bro, you make the world better
Those are good tips I've not seen before, thanks mate.
Yeah that soap on the screw trick is a game changer. An old timer showed me that several years ago and I've used soap a million times since. The next time you stay in a hotel grab yourself a few of those little soaps to throw in your drill kit and or tool box.
Candle also
@@garlabanfly Even better than soap.
Больше всего про гвоздь понравилось, век живи век учись👍
Thank u so much for ur effort....what i did not know, i know now..take care
Very nice idea and creative thought, keep it up and mesmerising us with you knowledge and tallent.
Used the first two tips countless times. I used a candle instead of soap, always carried a bit of broken candle in my tool kit.
Using soap is wrong,
Can use a hard lubricant,
Eg: Grease
Otherwise the nail get corrosion
😊😊😊 V e r y n i c e 😊😊😊
Show.... thanks for sharing with us those good ideas. From Brazil.... 👏🙌💅😎
GREAT IDEAS! EXTREMELY USEFUL!
That s a good idea I will soap up my nails I need for the job am doing only 5000 to go. 🤣
Soap is water based will make your nail coroded
I was taught the old way, dip them in varnish. Nope just lean into that torque
It works.... Sometimes.... Not hanging your wood over an edge when hammering nails in, that also works..
Thought same thing, nailed first over edge then second one on top of board
Wow learnt a lot in little deserved a like
Wow amazing..the first one is very helpful for me.. thanks a lot
I haven't touch a wood for years now...and I'm still watching this 😪
you can give advice to carpenters if u ever come across one
Try a gain ...
Try viagra 😬
So where were you sleeping? On road?
Clip head off nail, use nail to drill hole, drive another nail through hole with no splitting. Simple, effective, and professional. We use this method in oak trim without ever splitting.
Good
Apek tenan pak de... Corone... Good job enggeh pak de...
Show de bola meu brother, 👍👍👍👍👏👏👏👏👏
I was taught the soap trick by an old joiner, over 60years ago. In those days we used tallow but a wax candle is better for the toolbox. I also learned the trick of blunting the nail to stop wood splitting. This works because the nail is crushing the wood fibres and not trying to drive through like a wedge - it has nothing to do with extra support.
Nice hints, but: Soap can corrode the fastener. Use Bees Wax instead
dietero100 i usually use vaseline. Works like a charm
Because soap has Sodium Chlorides in it.👍
JUST DO IT!
Any wax will work.
Very inspiring,, good job 👍👍 success
I keep forgetting bout the nail trick, doing fascia when needed, that'll come in handy. Dat trick der!
Now is time to discover a wheel!!! Go for it.
NAILED IT!!!!
Nah, he screwed up.
Very good thanks sir God bless you and your family Amen
wow! Thank you so much for this. Was a big help.
I thought that last one was a slim jim for some reason and I was like there’s no way he’s drilling a hole with a meatstick...
8
That's what she said.
Love watching woodworking videos and then read the comments below of all the know-it-all people lol
wow nice trick and thank you for sharing this video
Genial . Gracias! Para poner en práctica
What was the purpose of the soap in the screw? I noticed went in further then the other and they were both put into different grains of the wood too so that would affect how the screw goes in.
Lubrication.
Now the wood smells like spring soap
Bohot khob MASH ALLAH
excellent
nice the last one helped a lot :D
the sandpaper is a good hack. thanks
Clem McGuinness
Why not just use the bit drilled the hole with? Or drill the proper size hole to begin with? That’s the worst “trick” of the 3 and will eventually ruin your chuck as well.
@@Spoons7414 I know right just use a sanding stick this guys an idiot
Maybe add some commentary behind how and why this works. I was confused about the point of some of the techniques.
1) Blunting the nail causes the tip to tear through the wood, instead of utilizing the full affect of the 4-sided wedge that is a nail tip.
With the advent of inexpensive nail guns, this technique is not used nearly as much as it was in, say, 1975? Pay attention, though, to the direction of the chisel on the string of nails/brads you're using, or you can still split the end of a board; only more quickly and with a satisfying 'ca-chunk'.
2) The soap lubricates the screw so as to make twisting it directly into the walnut board go somewhat easier. And removal is easier as well.
1st- bad choice of screw. Those bugle headed sheetrock screws are very prone to popping the heads off, perhaps due to the double-thread design; the screw goes in more quickly, but provides much less pulling power compared to a regular single thread type screw. Use the right screw to start with.
2nd, I don't install screws without providing a tapered countersunk pilot hole. IDK what it is about being a cabinetmaker for 40 years that causes one to do things right the first time. It just does.
3) using a rolled up piece of abrasive paper to enlarge a too-small hole.
If you have only the one hole to correct, this is a solution, but you can easily make the hole too big and end up with a sloppy fit. Here's an idea- use some calipers to measure the machine bolt before you drill a single hole, and then choose the best sized drill bit to accomodate the bolt? And make that first hole in a piece of scrap to test fit it? Just a suggestion...
Princess Leia Organa he drilling in a not on number 2
@@shaylynwonky2651 zfz
Nice good job n tips bro 👍
Thanks for video
Amazing and very brilliant ideas
👍👍
Это ,от отцов нам , а им от их них отцов....
Молодеж этого не знает..😶
I am so sure that you will find good way to make it on stodoys.
Very nice to me Greg. Love these plans. Thanks a lot :D
Awesome to me!
Sederhana dan sangat mudah.
Sangat bermanfaat buat yg memerlukan.
Semangat.
woww... amazing Mr.
My old man taught me that one years ago.
That first one does work, i've done it many times. Just try it.
Jye
It's great I can't believe you can do this
These are actually tricks that i learned in shop class back in junior high
Using some saliva works well too, plus you get to leave a little bit of yourself with each project 🤣
And the rust will keep the screw in!
Lol
I would have used a larger drill bit for the last "trick"
😂😂😂
Maybe in a pinch
Sometimes you dont have the right size bit for what you need. Its a good trick that would have saved me buying a larger bit this week
Good idea. Thanks for your sharing.
Terimakasih informasinya sangat bermanfaat sekali 👍😁
Yup youtube "nailed" the recommended.
Pa dam tss
You can use woodprix instructions to build it in the cheapest way.
so nice to me
Колька Пепси k
But in India sope is the cheapest 😂😂 only 1$
Thak you so much i really enjoy the video
Excellent. Top man !!
Шуруп забитый молотком держит лучше чем гвоздь закрученный отвёрткой.
Bastard u think we are fool ...nails hammered in different ways, drilled on different wood type
The soap trick also works with a saw blade.
What did you scrape the sandpaper with?
Just looks like a drill bit
Thanks for the very2 useful tricks
Amazing style I also will try this
Guys, do not touch a screw that you have used a driver to remove from wood - it will burn your fingers
friction
Bruh
Amazing ideas
Nice video ❤️👍amazing❤️❤️❤️👍👍.
Amaze, it. Work. Thamks
You're not doing the test equally
He drilled the second screw on softer sap wood unlike the harder wood on the first screw
Adji Pamekas como hacer un cimiento cíclope
Loop in office and Khalid w r
Shit was bugging me....
@@hildagraham5846 thanks for this guidance
Pre_drilling is better for sure. and just drill the right size hole for the bolts.
Nice tip!! thank you!!!
Very good information 👍👍
Particles of sandpaper fall into the chuck and damage the drill.
Dobt worry bud the drill cost him like 5 bucks
Pero que mierda!?
Si tan solo ubiera sabido eso hace 26 años no estaría ahora en prisión.😲😲😲
trox roch no entiendo?
Yo tampoco
😂
trox roch jajajjajaja ahora te toca enseñar en prisión
😙♥️
Im woww.... tq for that tipss....
Good idea...tq so much..
I just started woodworking so forgive my ignorance. I almost feel like these tips are more like hacks in a jam (e.g. missing the correct bit size or tool). Before each one I thought (1) Pilot hole (2) pilot hole or self tapping screws (3) Larger pilot hole or maybe a long sand bit on a dremmel tool (if those exist).
The last one def made me think quick hack because (again forgive my ignorance), I felt like any chuck subjected to holding sand paper regularly would lose the edge grip (and subsequent torque) that holds bits firmly. You might be better to also place a small bit in the roll to make the sand paper more firm (against the chuck wall?) and less prone to moving and inadvertently sanding the inside of the chuck.
brokensword8402 Hi. The part where he pounded the point of the nail is a good old method to avoid splitting wood as you nail it. . But you don't have to hit it six times. Just one or two quick taps flattens the point and prevents it from splitting the wood usually. This is important to do for dry wood espevially. The soap one was interesting, as opposed to predrilling. The sandpaper one I never saw before but I thought it was pretty good. I've done a lot of woodworking, well, I was a handyman actually. That flattening of the nail point is one I needed to use many times. 🙏
People: why this in recommendation video?
Me: why i am watching this
Because you are a......... 😂😂
You're an IT guy, right?
Wow great super ideas