Thanks for that Video. Was my entry in the AM32, but you haven't any 1/18 stuff with AM32. You can add a ton off torque to the low speed by uncheck the variable PWM and change the value in the PWM to maybe 16 and recheck the Variable PWM. The variable PWM takes the Value in the PWM Box and double it. Lower PWM way more torque. Poles setup is needed for the Sinudosial Startup and only for that
Thank you, very much appreciated, the new Injora Brushless ESC is configured with what looks exactly like this and while they have a tutorial video i was wondering what all the parameters do.
Programming the esc. Is cool and all, but the only reason we have to buy the mamba x is useing tha aux wire to cut the brake off and on and the amps. We hillclimb/crawl very steep slick hills here in TN. Love the commercials😊
I like 4s because I like to party.....lol That aux on the mamba x is really a feature I'd like to see more of. Hobbywing g2 has something similar, but not quite..... Some people drive slow, but I wanna go fast.
Thanks for doing a new video. For some reason the settings window doesn’t pop up on my computer when I plug the ESC in even after the EXE driver was installed, But I found I could reach it if I go into the Esc Config Tool file folder and click on Serial port connector, So I just made a desktop shortcut for it. Also I picked up the 1800 team spec revolver, would it best to leave the esc at 2200 kv?.. All that being said everything works great and I love the setup, keep up the great work!..👍✌️
How would this work on a rc touring car? Tbh I didn't even know this was an option but this is pretty cool. I've been looking at throwing one of my flight controllers into a car.
I was able to download the programmer but when I want to connect to my crawlmaster v3, the program throws up a warning saying the file is not specified. What did I do wrong??
You mentioned the noise on an outrunner. I have a 1900KV Classic with a Castle SW4 and the high pitched whine is pretty extreme. Would your new ESC help with this? Great video! 👍
Justed paired the new Crawlmaster V3 to a 1800V2 outrunner (12t, 3s currently) Ive been runnig on a Mamba Micro. First run today, at little to no stress spots, I found an alarm going off, shutting down all use, just a blinking light, and alarm. Unsure of cause, in all cases, battery voltage was 11.4v or higher. Got no performance isues during actual tight spots, including gap squeezes. Once it went off on a mild incline, second time was on top of a flat rock. (Flysky GT5 rx/tx). Any thoughts?
I just got this mini v3 for my capra....question tho...I don't see any indication ABC for the wiring location? So just connect the middle to middle on motor/esc and the other two any old way?
I have you're V3 and am running 3s. Is the only option to increase "punch" to move up to 4s or is there a programming option. Comes on a little sluggish as is.
would you recommend changing the kv from 2200kv 14p to 2500kv 10p in the softeware for the revolver v3 2500kv 10p? I'm new to this revolver motors, so hoping this would be a good combo crawlermaster v3 and revolver v3 2500kv 10p
No throttle reverse rate in the apps apart from doing it on the TX... I dont want my throttle channel reduced 50% rate but the esc itself as I am using the throttle lever for another mix
Thanks for that Video. Was my entry in the AM32, but you haven't any 1/18 stuff with AM32.
You can add a ton off torque to the low speed by uncheck the variable PWM and change the value in the PWM to maybe 16 and recheck the Variable PWM. The variable PWM takes the Value in the PWM Box and double it. Lower PWM way more torque. Poles setup is needed for the Sinudosial Startup and only for that
I have a Redcat Ascent 18 and interested in the AM32 esc. Which AM32 would you recommend for the 1/18?
Awesome it's plug and play for my Revolver 2200kv v3 then. Gonna order one on Friday.
Thank you, very much appreciated, the new Injora Brushless ESC is configured with what looks exactly like this and while they have a tutorial video i was wondering what all the parameters do.
Thank you this is the video I have been needing definitely didn’t need to change any settings out the box but it is nice to now how if you wanted
Really appreciate this help! Also love the new shop setup!
Happy to help!
Great esc an really nice not having to program it out of the box.
Really nice relaxed and informative video! Thanks mate 👍
Very helpful for folks who tap in AM32 first time👌👍👍
What size outrunner is recommended for this esc???
Because I have alot of huge cogging.
Revolver V3 2500KV
I can’t get the programmer to download on my computer and connect to my esc. What do I need to do?
Programming the esc. Is cool and all, but the only reason we have to buy the mamba x is useing tha aux wire to cut the brake off and on and the amps. We hillclimb/crawl very steep slick hills here in TN. Love the commercials😊
I like 4s because I like to party.....lol
That aux on the mamba x is really a feature I'd like to see more of.
Hobbywing g2 has something similar, but not quite.....
Some people drive slow, but I wanna go fast.
Awesome video/explanations! I know with BLHeli, there is a way to change the arming music, is there a way to do it with AM32?
This was incredibly helpful!
Glad you think so!
@@HolmesHobbies Sooo what are the chances that you'll build a brushless inrunner for the micro crawlers?
this video is so helpful!
Thanks for doing a new video. For some reason the settings window doesn’t pop up on my computer when I plug the ESC in even after the EXE driver was installed, But I found I could reach it if I go into the Esc Config Tool file folder and click on Serial port connector, So I just made a desktop shortcut for it. Also I picked up the 1800 team spec revolver, would it best to leave the esc at 2200 kv?.. All that being said everything works great and I love the setup, keep up the great work!..👍✌️
2 of these esc and both needed to be changed because I had no drag break
How would this work on a rc touring car? Tbh I didn't even know this was an option but this is pretty cool. I've been looking at throwing one of my flight controllers into a car.
@chestergt7765 as long as the esc doesn't overheat it would work just fine!
I was able to download the programmer but when I want to connect to my crawlmaster v3, the program throws up a warning saying the file is not specified. What did I do wrong??
You mentioned the noise on an outrunner. I have a 1900KV Classic with a Castle SW4 and the high pitched whine is pretty extreme. Would your new ESC help with this? Great video! 👍
Yes, they are silent with this esc!
@@HolmesHobbies Awesome! SOLD! Thanks! Order placed!
Thanks so much
Justed paired the new Crawlmaster V3 to a 1800V2 outrunner (12t, 3s currently) Ive been runnig on a Mamba Micro. First run today, at little to no stress spots, I found an alarm going off, shutting down all use, just a blinking light, and alarm. Unsure of cause, in all cases, battery voltage was 11.4v or higher. Got no performance isues during actual tight spots, including gap squeezes. Once it went off on a mild incline, second time was on top of a flat rock. (Flysky GT5 rx/tx). Any thoughts?
Is the internal BEC adjustable ?
спасибо, мужик! оч информативно
I just got this mini v3 for my capra....question tho...I don't see any indication ABC for the wiring location? So just connect the middle to middle on motor/esc and the other two any old way?
Arbitrary, doesn't matter!
I have you're V3 and am running 3s. Is the only option to increase "punch" to move up to 4s or is there a programming option. Comes on a little sluggish as is.
Increase the amp limit is one way. 4s will definitely do it.
Reason it won't connect when I try to select the M1 motor?
I have a Capra, stock transmission 1,000kv revolver v3...it's getting hot on 4s .if I buy 3s batteries would that help?
@@frankie2499 that would help, gearing is very tall stock. Smaller pinion would also help. Adding underdrive to axles would help more
How to install the port installer
Just received one and it has no sin startup. How can I fix this
would you recommend changing the kv from 2200kv 14p to 2500kv 10p in the softeware for the revolver v3 2500kv 10p? I'm new to this revolver motors, so hoping this would be a good combo crawlermaster v3 and revolver v3 2500kv 10p
Nah, no need
thank you for the help @@HolmesHobbies :)
Do these have a built in BEC? If so, is it adjustable?
Not adjustable, 3a 7.4v
No throttle reverse rate in the apps apart from doing it on the TX... I dont want my throttle channel reduced 50% rate but the esc itself as I am using the throttle lever for another mix
No bec in this one?
Hi loving the products and explanation... could you recommend a esc for the revolver 2500 v2
Crawlmastee v2
@@HolmesHobbies thank you... do you know when the uk will be getting stock?
Is this for only 2200kw or can you use 2500kw on 3s?
2500kv on 3s no prob.
I just purchased the v3 for some reason it doesn't work when the steering servo is plugged in
What servo? All the time? A shorted servo can brownout a system
what bout bec and the noise ?
very quiet!
Being Windows only locks a lot of your fans out…… hoping one day to be apple to use my Mac mini to program my rigs. I have a lot of your products
It’s the am32 not him making it that way.
🍻
🦆👑
Crying in Mac 🤦🏼🤣
@aaroncarr5725 go to am32.ca , just need to let your web browser use USB devices
I can’t get the programmer to download on my computer and connect to my esc. What do I need to do?
@@ConnorNeltner is your computer recognizing the USB device? If so, you can go to am32.ca to program as well
@@HolmesHobbiesit is recognizing my usb on the website you just linked. But what do I do next?