8 year later and your video is still helping. They have discontinued these on my Shimano Saros 3000fa so you saved my entire reel. Not sure how you figured it out but cheers to those who are smarter than the rest of us, and take time to make a video!!
I was much worried about my Sienna 4000FD fishing reel, Anti-Reverse system was not working at all, but your very detailed and specific workshop helped me to find out the exact problem. The sleeve inside the clutch was upside down. Your cooperation in this regard is highly appreciated.
Wow and thank you. I have had a "replacement" on back order now for weeks. I am going to follow your rebuild, which is easy to understand. Hopefully I can get my reel fishing again and cancel the replacement. Thank you for posting - Dennis
Thank you! My surf rod got knocked over and my Shimano Baitrunner 12000D reel got injected with half the sand on the beach. Took it apart, cleaned all the sand out, re-greased it, and the anti-reverse wouldn't work. Found this video and it's back like new. Thank you so much!
Thanks soo much for this video! Took pictures while I was taking it apart but found out later they were blurred! Found out I put the springs in wrong. By the way , as a dog owner, I recognize the whining and scratching in the background as a dog trying to get in.....
Hey, thanks for the hands on demo on doing this! Saved me $25 because I was a minute away from buying a whole new assembly because the breakdown only showed the whole part. Once I pulled it apart, springs went everywhere and I almost panicked. You walked me through it and saved my A$$! Thanks for taking the time to help us out.
I dropped my Stradic Ci4 reel into the creek. It wasn't as smooth as usual, so I took it apart, cleaned and lubed it up. When I put it back together the anit-reverse didn't work. I followed your instructions step by step and now it's good as new. Thank you very much.
Probably the most useful and detailed maintenance video I've seen on youtube! Thank you! Literally cannot find this info. elsewhere let alone in such well framed and captured video. Make more videos!
Thank you so much, i was Following your instructions but didn't pay atention to the little twist at moment to put the top lid of the clutch...had to see your video again, did the little twist to the cap of the clutch and voila !! 👌👌👍👍
Thank you so so so much Jersey! You saved my reel. I was struggle putting my reel's parts together, and un-assemble it so many times and did not solve the anti reverse issue. After watching your video, I was successfully fix it in 5 minutes.
While watching your very helpful video, my mother and I both agree that you missed your calling as a golf announcer. Thanks for the video, back in action
Great job on making this video. I was doing some maintenance on a Biomaster 6000PG and couldn't figure out why the clutch roller wasn't working properly. I forget to load the springs with the slight twist. Thanks JT
Just got a shimano biomaster reel from my friend and immedietly clean it up..after cleaning and greasing some parts, i wonder why the anti reverse not working..so i search videos and luckily i saw your great, informative, helpful video..thanks for sharing sir...well done
Great video, many thanks, it can't be stressed enough that if suddenly after servicing your ant-reverse 'just stopped working' to check you have that tapered spacing collar the right way up as you point out at the end ! That alone can save you having to dis-assemble the whole anti-reverse mechanism as it will make the anti-reverse only work when the reel is pointing down! if at all ! Keep up the good work Tom !
Thanks so much for putting the time into this video. It demystified the rebuild on the anti-reverse clutches on my Shimano spinning reels. The question I have is how in the world did you figure out the first one? You must be a clever mechanic.
Thanks so much for the video! I took apart my first reel yesterday and i've put the spring in wrong so the antireverse doesn't work! Really appreciate your video as it shows where i've gone wrong and what to do! Just bought a Sahara too but the one i've taken apart is a cheapy Silstar reel. Thanks again!
Awesome vid....great job....mine came undone like u mentioned where pieces flew like u said....didn't know how to put it back together but looked at your vid and BAM...working champion again! thank u
Thanks greatly for this video. It saved me sending my Twinpower 8000PG back to Japan for a service. I'd made the mistake of loosening the two screws holding the whole anti-reverse block together and the springs had popped out of the right alignment when I put them back in.
Thank you so much for this video you saved my shimano sedona came across that issue and I couldn't figure it out till I came across this video. Thanks again
I was trying to reassemble this on my Sienna, went through several different ways of, assembling it, and eventually found this video. Turns out, I had it right one of the times, but my way of testing if the anti-reverse was activating or not was flawed. I thought you could test if it was activating by turning the pinion manually, but apparently you have to actually have the rotor and handle on to check (for the Sienna at least). Thank you for helping me make sure I got it right though, this would’ve been great for me to see before I spent over half an hour trying out all the other configurations. 😂
Thank you for your video Tom. you helped me out finish this puzzle. Let us know if you have a vid on explaining how to put the spring back in the bail. There's one on youtube but they do not show the actual way to place the spring and its plastic connector.
Thanks for this. After reassembling my Saragosa, the reel was going in reverse despite it being a "Stoperless" design. I must not have lined up something properly - probably the springs. I didn't full disassemble the anti-reverse mechanism but I had to have moved something out of position/alignment. I'll open the reel again, and using your video, hopefully be able to remedy the problem.
Thank you!!! I dissasembled my clutch and could not get it to work again. Happens to be that i installed the springs behind the rollers instead of in front of them. Simple thing that made it not work.
Thanks so much for this -- great help just at the right time! Unfortunately looks like I'll need to replace mine. Just too much rust damage on the rollers from neglect (used reel).
it was great, Can you show how to complete the assembly for the rotator part as well. I did all the steps as the video but still the anti-reverse not working.
Great Video! The Anti-Reverse-Assembly was the only thing I was afraid to open and clean..Not anymore! On my shimano sustain, which i fished for years all of a sudden, when i get snagged somewhere and try to loosen, the antireverse unlocks and creates trouble. Lets see if it works again after cleanig the antireverse. Thanks alot!!
@@JerseyTom Hi Tom, just opened the thing - it was pretty messy inside with alot of oil in there. Cleaned everything and, thanks to your video, put it all back together in no time. Only one thing different was, the metal ring didnt have an indentation (Shimano Sustain 4000 FG) but it worked out fine anyway. Thanks again, your video was a big help!!
Thanks for doing this vid. I recently disassembled my Symetre 3000 because it was sticking...couldn't figure out why the anti-reverse wasn't working, until I watched your vid. I had that big washer in upside down.
Really, really good video. After seeing how the inner workings of the anti-reverse bearing work now.... I still don't understand why it is a "no grease" assembly? What does grease do to negate the function of the anti-reverse?
Had to do this myself on my shimano stradic ci4 1000 hg. Was a bit fiddly but managed to sort it. Make sure you have a small pair of tweezers or something similar. And another point is DO NOT GREASE THIS. As the grease will clog the springs and they wont work properly. Just use a small drop of oil.
Thanks mate. I'm having troubles with my antireverse in a Biomaster SW and I hope this video helps me to fix the problem. Can you make a tutorial for how to complete disassembly and re-assembly a shimano spinning reel? Biomaster or twinpower or stella if you can.. thanks anyway
usually I take pictures while doing such thing, but you made excellent video, thanks! Is it possible that only small amount of oil ( possible bearing droppings) can cause anti revers to fail? sometimes it just fail to hold, noticed that during below zero temperature and when I stuck on rock and try to release bait by shaking (stella 4000 95). Inside reel everything looks good as new, no corrosion, wearings, or broken parts.
Man, great video but I don't know what's wrong with my Sahara C5000, I've tried this process but it doesn't work no matter what I did, and that part isn't anywhere for sale.
Hi, My handle spins both ways when I have the Clicker on? So the Anti reverse does not work anymore. Do I have to just clean this to fix the problem? Thanks Gary
damn i have been looking for 3 years who can fix my shimano reel, because of you i already fix it..your my savior thank you so much..salute
👍
Thanks so much man. Pulled it apart drunk and had no clue how to put it back together
First guy that knows the best way to reassemble the anti reverse mechanism, brilliant Tom.
8 year later and your video is still helping. They have discontinued these on my Shimano Saros 3000fa so you saved my entire reel. Not sure how you figured it out but cheers to those who are smarter than the rest of us, and take time to make a video!!
I was much worried about my Sienna 4000FD fishing reel, Anti-Reverse system was not working at all, but your very detailed and specific workshop helped me to find out the exact problem. The sleeve inside the clutch was upside down. Your cooperation in this regard is highly appreciated.
Wow and thank you. I have had a "replacement" on back order now for weeks. I am going to follow your rebuild, which is easy to understand. Hopefully I can get my reel fishing again and cancel the replacement. Thank you for posting - Dennis
Thank you! My surf rod got knocked over and my Shimano Baitrunner 12000D reel got injected with half the sand on the beach. Took it apart, cleaned all the sand out, re-greased it, and the anti-reverse wouldn't work. Found this video and it's back like new. Thank you so much!
Thanks so much for this video. I would have given up without your help. I do appreciate your effort.
Thanks soo much for this video! Took pictures while I was taking it apart but found out later they were blurred! Found out I put the springs in wrong. By the way , as a dog owner, I recognize the whining and scratching in the background as a dog trying to get in.....
Hey, thanks for the hands on demo on doing this! Saved me $25 because I was a minute away from buying a whole new assembly because the breakdown only showed the whole part. Once I pulled it apart, springs went everywhere and I almost panicked. You walked me through it and saved my A$$! Thanks for taking the time to help us out.
I dropped my Stradic Ci4 reel into the creek. It wasn't as smooth as usual, so I took it apart, cleaned and lubed it up. When I put it back together the anit-reverse didn't work. I followed your instructions step by step and now it's good as new. Thank you very much.
Probably the most useful and detailed maintenance video I've seen on youtube! Thank you! Literally cannot find this info. elsewhere let alone in such well framed and captured video. Make more videos!
Thank you so much, i was Following your instructions but didn't pay atention to the little twist at moment to put the top lid of the clutch...had to see your video again, did the little twist to the cap of the clutch and voila !! 👌👌👍👍
Thank you so so so much Jersey! You saved my reel.
I was struggle putting my reel's parts together, and un-assemble it so many times and did not solve the anti reverse issue.
After watching your video, I was successfully fix it in 5 minutes.
While watching your very helpful video, my mother and I both agree that you missed your calling as a golf announcer. Thanks for the video, back in action
Best 10:30 watch on UA-cam! You helped me fix my anti-reverse thus saving me about thirty bucks for a new shimano sienna. Thank you!
+gary romero Thanks very much! I'm glad that you were able to use it to fix your reel.
Cheers mate....3 hours after trying to figure out why my anti-reverse didn't work....I watched your video.
...Baam....works now....
Thanks, bro...even though your video is from 10 years ago... it helped me save my ultegra reel
happy it helped!
Thank you, thanks, you have saved my old stradic reel, with more than twenty years of use. BEST regards
Thank you Tom, got my anti reverse working properly now after a reel service.
Great job on making this video. I was doing some maintenance on a Biomaster 6000PG and couldn't figure out why the clutch roller wasn't working properly. I forget to load the springs with the slight twist. Thanks JT
Just got a shimano biomaster reel from my friend and immedietly clean it up..after cleaning and greasing some parts, i wonder why the anti reverse not working..so i search videos and luckily i saw your great, informative, helpful video..thanks for sharing sir...well done
Awesome vid, thanks so much for posting, I was stupid enough to take this apart and was panicking that the reel was a loss
Great video, many thanks, it can't be stressed enough that if suddenly after servicing your ant-reverse 'just stopped working' to check you have that tapered spacing collar the right way up as you point out at the end ! That alone can save you having to dis-assemble the whole anti-reverse mechanism as it will make the anti-reverse only work when the reel is pointing down! if at all ! Keep up the good work Tom !
Thanks so much for putting the time into this video. It demystified the rebuild on the anti-reverse clutches on my Shimano spinning reels. The question I have is how in the world did you figure out the first one? You must be a clever mechanic.
Much appreciated you doing this. Really am... got me out of a tight spot on a fishing trip.
Thanks so much for the video! I took apart my first reel yesterday and i've put the spring in wrong so the antireverse doesn't work! Really appreciate your video as it shows where i've gone wrong and what to do! Just bought a Sahara too but the one i've taken apart is a cheapy Silstar reel. Thanks again!
Legend!
one more reel saved!
great video, thank you so much!
Finally got my Stradic it fixed thanks to this video. thank you!
Thanks a lot. I was really sad my reel stopped working. Now it is perfect.
Thanks for the video, just saved the anti-reverse of my Sienna 1000. Legend 💪
Awesome vid....great job....mine came undone like u mentioned where pieces flew like u said....didn't know how to put it back together but looked at your vid and BAM...working champion again! thank u
Reassembled my Saragosa using this video, and I was able to correct the infinite reverse problem. Thanks!
No problem, glad that it helped. Tight lines!
Thanks greatly for this video. It saved me sending my Twinpower 8000PG back to Japan for a service. I'd made the mistake of loosening the two screws holding the whole anti-reverse block together and the springs had popped out of the right alignment when I put them back in.
Good stuff! Glad you found the video useful and were able to get things working again.
Lifesaver! My Shimano Stradic FK was spinning backwards and I had no idea what was causing it. Definitely use this video in the future!
A Lin glad it helped!
Very helpful. Thanks for posting this and leaving it up.
Thank you! I repaired my reel thanks to your video!
Thank you so much for this video you saved my shimano sedona came across that issue and I couldn't figure it out till I came across this video. Thanks again
Thanks Bud! you kept me from slinging it out the window!!
Thx. This help me degrease the anti reverse assembly on my Sienna 2500. I was "that guy" that greased everything...
You saved my reel :D Thank you so much!
Themn bro! You saved me! I guessed i destroyed my reel but whit your video i fixed the anti-reverse and could go fishing tommorrow!
Thanks so much for this video. I would have given up without your help
I was trying to reassemble this on my Sienna, went through several different ways of, assembling it, and eventually found this video. Turns out, I had it right one of the times, but my way of testing if the anti-reverse was activating or not was flawed. I thought you could test if it was activating by turning the pinion manually, but apparently you have to actually have the rotor and handle on to check (for the Sienna at least).
Thank you for helping me make sure I got it right though, this would’ve been great for me to see before I spent over half an hour trying out all the other configurations. 😂
Ccvczzsssyyggyyygggf
Gj you x[88 >*; 9
Thanks, this video helped me out. The anti reverse can get very complicated
The most useful video on UA-cam thx a lot mann!!
Drag kept slipping watched your vid turned out the whole assembly was full of grease watched the id and its as good as new !!!
Thank you, my Slade now works. Very well done Tom, Rod
It all worked for Me.Thanks for your time and effort.
Just saved my reel! Thank you for a great break down!
Thank you for your video Tom. you helped me out finish this puzzle. Let us know if you have a vid on explaining how to put the spring back in the bail. There's one on youtube but they do not show the actual way to place the spring and its plastic connector.
Great video.well done.had to take mine apart the other day.
Thanks for this. After reassembling my Saragosa, the reel was going in reverse despite it being a "Stoperless" design. I must not have lined up something properly - probably the springs. I didn't full disassemble the anti-reverse mechanism but I had to have moved something out of position/alignment. I'll open the reel again, and using your video, hopefully be able to remedy the problem.
Thank you!!! I dissasembled my clutch and could not get it to work again. Happens to be that i installed the springs behind the rollers instead of in front of them. Simple thing that made it not work.
thank you for this valuable video, i was in a big mess and could not get the damn thing back
thanks! helped me getting my Spheros 4000 back together!
You help me so much thank you mr
A great help thanks. Fixed my anti reverse!
Thanks so much for this -- great help just at the right time! Unfortunately looks like I'll need to replace mine. Just too much rust damage on the rollers from neglect (used reel).
hi,
thank you so much. your videao is clear . it helped me to resolve problem and reconstruct carefully my sienna shimano reel (anti-reverse)
very informative and clear directions. thank you
Great video. Helped me out a ton.
Thank you
thanks a lot lad! really really helpful! Greetings from Greece. stay safe
thanks. great job! very well done. Worked for me.
it was great, Can you show how to complete the assembly for the rotator part as well. I did all the steps as the video but still the anti-reverse not working.
Great video and saved me alot of time and inconvenience
What a lesson! 100 tnxsss! )) I can complete service of my beautiful Thunnus now!
Thank for this video.. same problem of my reel. Anti reverse is not working..
Great video. Really helped me. Thanks so much.
Great Video! The Anti-Reverse-Assembly was the only thing I was afraid to open and clean..Not anymore! On my shimano sustain, which i fished for years all of a sudden, when i get snagged somewhere and try to loosen, the antireverse unlocks and creates trouble. Lets see if it works again after cleanig the antireverse. Thanks alot!!
Thanks for watching!
@@JerseyTom Hi Tom, just opened the thing - it was pretty messy inside with alot of oil in there. Cleaned everything and, thanks to your video, put it all back together in no time. Only one thing different was, the metal ring didnt have an indentation (Shimano Sustain 4000 FG) but it worked out fine anyway. Thanks again, your video was a big help!!
great video, you are a life (and reel) saver.
Very helpful, great video. Thanks!
Hi Tom, do you know the measurements for the little rollers? Mine have rusted out and I need to replace them. Many thanks for a great video. Steve.
lets just say my anti reverse wasn't working after i cleaned it and I was able to use this video to get it back to working!
Awesome! Thanks for the vid!!
Thanks..you saved my reel and my money..🤣
thanks toms.. your video saved my shimano.. hehe
Thanks, Tom! You saved my life!
You're welcome, thanks for watching
Great video
thanks hero now mi reel is perfect
So my anti revers is not working. If i flip that little metal ring over so the big side is facing up, it will work again?
Thanks for doing this vid. I recently disassembled my Symetre 3000 because it was sticking...couldn't figure out why the anti-reverse wasn't working, until I watched your vid. I had that big washer in upside down.
I need to install the bail, do you have a video of that
what is a anti reverse used for I can't find any info on what and how to use it I got a Garcia Mitchell 300 and don't understand the reverse
Brilliant video. V helpful ....thanks so much
Really, really good video. After seeing how the inner workings of the anti-reverse bearing work now.... I still don't understand why it is a "no grease" assembly? What does grease do to negate the function of the anti-reverse?
Had to do this myself on my shimano stradic ci4 1000 hg.
Was a bit fiddly but managed to sort it.
Make sure you have a small pair of tweezers or something similar.
And another point is DO NOT GREASE THIS.
As the grease will clog the springs and they wont work properly.
Just use a small drop of oil.
Great VID thanks!
Thanks mate. I'm having troubles with my antireverse in a Biomaster SW and I hope this video helps me to fix the problem. Can you make a tutorial for how to complete disassembly and re-assembly a shimano spinning reel? Biomaster or twinpower or stella if you can.. thanks anyway
Awesome video!!!! Thanks!!!
My anti reverse switch and cam rotted on my shimano 6500. Can I access them to replace once I get this part you reassembled off the reel?
usually I take pictures while doing such thing, but you made excellent video, thanks! Is it possible that only small amount of oil ( possible bearing droppings) can cause anti revers to fail? sometimes it just fail to hold, noticed that during below zero temperature and when I stuck on rock and try to release bait by shaking (stella 4000 95).
Inside reel everything looks good as new, no corrosion, wearings, or broken parts.
Thank you for sharing
Tnx man, you saved my stradic!
Man, great video but I don't know what's wrong with my Sahara C5000, I've tried this process but it doesn't work no matter what I did, and that part isn't anywhere for sale.
Great video 👍
My stella 2019 8k anti reverse assembly is rekt can I use a saragosas AR rollers for my stella?
Hi, My handle spins both ways when I have the Clicker on? So the Anti reverse does not work anymore. Do I have to just clean this to fix the problem? Thanks Gary
teşekkür ediyorum beni büyük bir masraf tan kurtardın
Thank you so much great video.