DIY Sink and Faucet (real running water)
Вставка
- Опубліковано 21 лип 2024
- So many of you requested a tutorial on a motorized working sink so here it is! I've incorporated so many different techniques in this video to get a super realistic result. I hope you enjoy it!
For the digitial files of my 3D models, check out my Etsy shop! www.etsy.com/shop/TheSquareTo...
3D Modeling Software: www.tinkercad.com
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
For all the supplies I used and my recommendations for basic tools to get you started building miniatures, visit www.amazon.com/shop/thesquare...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
✏ Keep up to date with my videos! ➜ bit.ly/2elIQJr
INSTAGRAM➜ / thesquaretospare
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
✏ Equipment I use:
Canon Powershot: amzn.to/31ykgh1
Tripod: amzn.to/2WFADES
Daylight Flood Bulbs: amzn.to/2MNUYIL
Light Reflectors: amzn.to/2KYlfBF
Light Stands: amzn.to/2XTvg6o
Mic: amzn.to/2WGw0iS
Editing Software: Final Cut Pro
✏ Products used in this video:
Photon Mono Printer: bit.ly/3gN9E6i
Wash and cure 2.0: bit.ly/37disz6
Arteza Acrylic Pour Paints: bit.ly/3l0lOJC
TotalBoat Epoxy Resin: amzn.to/37W6clu
Iwata Airbrush: amzn.to/2ZJTwv8
Chrome Paint: amzn.to/2KtSgYc
Mini Water Pump: amzn.to/2K6aMpy
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
✏ MUSIC:
1973 - Bruno E, Bright Eyed Blues - Unicorn Heads, and Golden Empire - The 126ers, courtesy of UA-cam Audio Studio
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FTC Disclaimer: This video is NOT sponsored. 3D Printer and Curing machine provided by Anycubic for demonstration purposes. Some of the links above are affiliate links. - Навчання та стиль
Thank you all for enjoying me in my love chat! I always love talking to you guys ❤️
I’m sorry that I wasn’t able to join your chat. That 3D printer tutorial was very clear and thorough. The sink and faucet look great, and even are better since they work perfectly, too. Excellent job, as always, Cath.
Especially thank you for the software lesson!! And this was my first introduction to a liquid resin printer!! OH MY!! The possibilities!!
You're so welcome! I was worried a software lesson would be too boring for a video so I'm ecstatic to hear the positive feedback :)
@@TheSquaretoSpare I've been tinkering with TinkerCad since I watched your video! LOL Saved my monogram as my first .stl file!
@@TheSquaretoSpare omg please always include software explanations. Its just as soothing, educational, and interesting to watch those as it is to watch the miniatures created without this technology.
Wowww that’s awesome!!! I’m so glad you’re having fun!
Love everything you make, this is above and beyond. thanks
This is perfect thank you. I've been debating on getting a 3d printer for a while and it looks like I just HAVE to considering the amount of miniatures I make/use. I'm a huge fan to detail so seeing a working miniature sink is a dream come true haha.
Make sure to do your research, there are 2 main types of 3d printers, it depends on what you want to do for which one you get, I would be glad to help!
Also do your research for safety if you consider a resin printer! Respirator needed with Nitril gloves and better full skin protection, also for the eyes!
I cannot even begin to describe how talented you are or how much I adore your videos
Been following your updates on your community posts! Super exciting to see a full video! Thank you for all the love you put in your work this is incredible 🙏❤️
Thank you very much for your wonderful videos. These makes are amazing, your attention to detail is spot on, and your explanation is so clear and concise. I’m a clay sculptor, crafter, artist, plus I teach certain crafts in my spare time, but I’ve just started dolls house and furniture making after a request, and hence building up my tools and equipment. I’ve been trying to find a smallish, starter resin printer and thanks to your guidance (and link), Im sure I’ve found exactly what I want (and need of course😁). I find the UA-cam community so generous in sharing their expertise and talents; so many like yourself are gifted and inspiring. Thank you form the bottom of my heart for sharing your time, energy and enthusiasm. You are generously giving newbies (and no doubt the experienced) help and guidance to take steps into fantastic miniature world. 💕
I've been looking at 3d printers for 1:6 scale items and I've been feeling very overwhelmed. Thank you for showing us the process and the software. Love your channel
I'm so, so impressed!!! Too bad I don't have a computer, resin or 3d printers 😂
Watching all of your videos for sure!!!
I'll think of something with this video as inspiration. Thank you!
That would be cool if you made a strainer too for the sink.
To make something like that up scale the holes would be so small the water wouldn’t drain properly
그래서 일본인에 가깝다는뜻인가요?? 전 체질적으로 일본섬족들은 별루 인간으로 보지않기때문에 댁의 모든글내용들은 다 듣고프지않슴다~ ㅋ
That was jaw dropping I literally watched part of it with my mouth open :))))) Thank you for sharing this cool project ♥
I'm completely mesmerized by the whole process. Thank you for such an informative video. I love it xx
One word "incrediblyamazing" !!!!!!! and thank you for all that you show and teach us. Love it
I love the effect of the silver veining after the epoxy on the counter set.
OMG! Wow that is beautiful. I wish all those machines were easily accessible in SA. I love making small scale furniture so, I would spend most of my time creating them if I had that 3d printer. You're doing an amazing job Kat.💞💕💗
Omg its been a few months since i even entered my craft room with my houses in it because i have a newborn and a toddler LOL im sure you understand (CONGRATULATIONS BTW! ) - And this tutorial is incredible! I debated trying to figure out how to make a working sink in 1:12 scale and i thought there wasnt a pump small enough but MAN THANK YOU SO MUCH for sharing the links and tutorials and information! I love your stuff ❤️❤️ you really have me inspired to try and sneak out this room while they are both asleep and maybe try to work on my house >.> (im procrastinating building the counters that will go on the sides of my stove) ! 😂 thank you so much for this!!
The pump would be great for the doll's shower
Love that idea!
Where have been all our lives? That was incredible!
This is amazing!! Can’t wait for the next video!!
Such creativity and an eye for design! Just found your channel today and glad I did, you’re amazing!
Can't wait to see the cabinets
I just started getting into this kind of arts and crafts. I was watching a bunch of Eric's Hobby Workshop before discovering your channel and I love the absolute contrast in the mood and delicacy xD
You're both great, but it was kind of unreal
Looks like a D&D terrain builder, different than this kind of mini. Might be good for foliage though if he does that
This was an amazing video to watch. I have to admit the 3D printing is so intimidating. I am afraid I would not be very good at it even after being told it is easy to do.😆
MY MIND IS BLOWN!!! THAT WAS FANTASTIC!!!!
I always wondered what 3d printing was. Even though I often buy miniatures made this way. Very informative vid.
Wow. I haven’t watched one of your videos in a while. You’ve come such a long way! Great job!!
Вы просто мастер с большой буквы. Браво.
Благодарю за эстетическое удовольствие от мастер класса.
With your creativity and attention to detail the sky’s the limit with the 3D printer!!!
This is fascinating....watching that little faucet work...😃🤗
I’ve been so excited to see this video, you never cease to amaze me!
Been looking into different printing for 1:6 scale but definitely love the smooth finish on the one u used for this project think my minds made up on the type ill get. Want the best most detailed house for my project for my girl. I want to make her the house I would have loved to have 😆
Love this one! Can’t wait for more!
Wow!! You did such a great job
Awesome video, can't wait for the next one!
Thank you for showing how to make a faucet with a 3 d printer I will have to watch it again it was very informative
Marisa
Awesome work!! Always have been intrigued my miniatures
Incrível, você é genial! Adorei!
Pretty cool! Thanks for sharing 🙂
I love this HAPPY to see you post
It's soo cool! I see this kind of 3D printer first time. Insteresting machine. And also the mini worktop is great.
You make so big progress since I watched you fot the first time! Congratulations ❤️🥳! Sorry for any mistakes in the sentences 😂😅.
It’s amazing to me how technology can make things easier. I mean, twenty years ago the only option for a miniaturist would have to create something would be to make it 100% by hand. Now we can print literally anything. It’s crazy! Awesome, but crazy!
Couldn't agree more! It's such an amazing time to be alive!
Everything you make is Amazing! I just found you today I love it!!!
This I looking for.. thanks sharing!!
This is so cool!!
Awesome. so realistic!
Its so cool!
OMG! It's fantastic! 😍 ♥️👏👏👏
I love your tools. This project is beautiful 😘👌
Wonderful ❤️
amazing job !!
It’s amazing how water comes out!
It's also amazing that there are machines like that.🤭
Omg! is this chuchu mini*kitchen!!!!
It's Fantastic !!!
I love this! Thank you, thank you for making an understandable turtorial about 3-D printing 🤗 May I ask how much the resin printing and curing machines costs?
absolutely incredible level of care and detail!
ua-cam.com/users/shortswR-01yX4KGg?feature=share
Marvelous! Tysm 😘
That is incredible 😍👍
Can't wait to watch! Do you have a DIY video of the cabinets at all?
That's next video
OMG TINKERCAD HAS CHANGED!! ❤️
You would make amazing fingerboard obstacles.
Woowww... Supper.... Nice video... Thanks... God bless you ❤️❤️❤️😁👍🤝🙏
Amazing
If you have windows you can also go with Microsoft 3d builder it has the slicing feature.
OMG JUST WHAT I NEEDED
Phenomenal. ❤
Giirrrlllllll!!!! Yaassss just what I needed!!! Which do you like better I recently purchased the Anycubic Mono
That is so cool
Amazingly beautiful working sink i will try it 😊☺️👍👍👏👏
Pretty mch awesome love your ideas
Hii!! I love your buildingg!!!
Can't wait to make this for my Daughter doll house
could you make a video on the plastic melting 3D printer? you said it was more popular so it would be great if you could show some tips or how to on the printer
Love the idea! I'll show it in more videos as I build out the mini kitchen :)
Absolutely amazing!! How long did it take for the printer to print the faucet and/or sink?
omgggg i love it
This is so fun omg
My GT teachers 3D printer auto matically adds supports we use tinker cad as well.
I bought a resin 3D printer 6 months ago and have not even opened the box yet because I didn't know where to go to create files. I've been on Thingiverse, but couldn't find anything there that I wanted to make so thank you! On my list now.
Yayyyyy!! I had no idea you got one too! Have fun playing around with me and message me if you need any assistance!
I would love to see more about the airbrush, I watched this video and bought a 3D printer, wash station, airbrush and paints all because of you 😂and im in love. Do you thin the arteza paints?
Nice
I was wondering if you would tell us how many centermeters is the sink
Is it possible to make a food-safe version, even if it takes a different method?
Wow 👍👍👍
Wow😍
How are you able to get the right scale for the 3D print?
Your crafts job is AWESOME 😱😱😘😘 I don't have words...👌👏👏 Thank you so much for this AMAZING video (and MERRY CHRISTMAS 😉😉😊😊)
Thank you so much 😀 Merry Christmas to you too!
🖤
I'VE EVER THOUGHT 3D WOULD BE INSALY DIFFICULT (TECHNOLOGY IS NOT MY THING XD) BUT YOU REALLY EXPLAIN VERY WELL AND LOOKS SO EASY! And i never knew about that liquid printer that's shocking! THE MARBLE EFFECT WAS AMAZING AS THE CHROMATIC EFFECT ON THE SINK. It would be so freaking cool see a functional toilet or a bathtub OR A SHOWER OMG THE POSSIBILITIES!✨👄✨
Thank you so much!! I'm so happy you found it easy to follow! It truly opens up a whole new world of possibilities!
@@TheSquaretoSpare YOU REALLY DROP THIS ✨👄✨🤲👑
Wow 👏 I love your work. What is the exact printer you have is it the Mono or the Mono X?
I am interested in the remote control for the pump
Can you give me the link to buy it?
Thank you
Wow 🥰😱
you should get yourself a scroll saw. look it up it will help you so much in your work.
Ola gostaria muito de comprar uma dessas onde encontro?
So cool! If I was sharing this printer with a few people & we wanted to keep our designs private, would we each need our own USB program?
👍❤
Also, I have been super tempted to get a 3D printer for miniature stuff, but I am hesitant because of the fumes... do you do anything special for ventilation?
Where did you purchase your 3D printer? Any suggestions?
Hello, could you please do a tutorial on how to make a 1:12 scale television?
nice :3
Can you do a Q & A video? I have so many questions ☺️
I love you video or oliwia. 😘😘😘😘😘😘
How did water come out of it