Man Builds Amazing Boat Using Wire Mesh and Fiberglass | by
Вставка
- Опубліковано 17 чер 2024
- Join us on an incredible journey as @bkscreative transforms wire mesh and fiberglass into an amazing boat! From the initial framework to the final launch, watch every step of this impressive build. Perfect for DIY enthusiasts and boat lovers!
We hope you enjoy your time on our channel. Tell us which topic you would like to see and we will definitely consider it
If you like our content subscribe to the channel and activate the bell button
Thanks for choosing TechFreeze
BKS Creative
/ @bkscreative
Music: Epidemic Sound
www.epidemicsound.com/referra... - Наука та технологія
What is more amazing is the ability of these people to use whatever they have to do the job, in this case a very very small pair of scissors, tape, and cable ties. In the west you go looking for specialised and very expensive tools to do a job that does not necessarily require them.
True!
since it is a rigid structure, you should have take advantage of it by creating separated chambers. this to ensure floating also in case of single/double damage. you can also add on the top hermetic inspection screw caps for maintenance, faster drying in case of spills and even keep fresh small amounts of food and small water bottles
Nothing hurts my heart more than watching a young man work fiberglass without a mask. You young sir will not grow old :(
The real issue is to polish the Fiberglass, he didn't polish it. Then It is okay.
@@ramon1930 your kidding me right, thats a bit like buffing a turd.
@@bobmalooga7249 You've done that? ..... I gotta ask .......... Why?
@@sheerluckholmes5468 It's a metaphor we use in parts of my country for waisted labour , as in "you can't make a silk purse out of a pigs ear".
@@bobmalooga7249 I'm not kidding. The major problem is the epoxy dust beeing inhaled. If there is not dust, there is not problem.
Отлично! Молодец! Отличная лодка для мелководья.☺
I realy hate posts with fake images in the link.
I agree (main photo with the UA-cam link at the beginning). Where's that big boat in this video? Not there. It makes me not want to watch anything else from an otherwise good channel.
A Rubber boat as a Basic Element would have cost less than all the Resin. But he did it. Lot of Work. ❤
you're a genius, smart skillfully.
Mengagumkan sekali pembuatan praunya ❤
Salam sukses selalu❤❤❤
😲💪👍👍👍 vous êtes un monstre du bricolage un génie 🍀👍💪🥰
I worked fiberglass for years in my youth, building boats, yachts, microwave antennas, and water park slides...just to mention a " few items". The fact that you Failed to use a roller to remove All of the air bubbles to decrease weakness, and all of the " dry spots" missing resin altogether tells me your " boat WILL break up and Delaminate very soon.
... and can we talk about the prop now?
The " boat" is probably built just for content creation.
No contaba con esa situación Batman claro que si Robin hay que cubrir todos los tipos de situaciones que presentan okay Batman
You right, his bot didn't last long. the fiberglass he made was too thin, he should have made 1 inch thick fiberglass. for durability and safety. so that it does not break. This fiberglass floor is too thin and dangerous. don't follow the people in this video.
Please la give this guy a break. From the moment I see him trimming the mesh with a pair of scissors, I admired his ingenuity to create this amazing craft.
awesome build... thanks for sharing...
If you had divided it in between, you would have prevented it from sinking in case of water intake. You could make it unsinkable only if you made it into at least 4 sections with plywood... But as a result, the idea is great...
i just wrote the same thing. i found your comment soon after
O cara é um gênio! Parabéns!
Incredible! 👍
Rewelacja 😊
forget Festool, it's the flip flops that make the difference... people wearing flip flops are just more handy!
True and correct.
Thats awesome, nice boat i hope you do a fishing video with your boat.
làm thuyền kiểu này quá hay
Pria yang membangun perahu menggunakan jaring kawat dan serat kaca sungguh mengagumkan! Kreativitas dan keahliannya luar biasa untuk menciptakan sesuatu yang unik dan berdaya tahan. 🚤👏
HAPPY ENVY!!! I like it!
최고!
The thumbnail its click bait
Very nice 👍. One thing though.. The engine mounts may not be sufficient. The constant torque and vibration may damage it.
awesome, thank you for your great video🎉👍
AWESOME!!
Ini sya suka cara berlainan buat nya masing2 ada cara skill
Well if nothing else I found out where Willy Wonka's chocolate river ended up...
great build!
Thanks for the clickbait thumbnail.
Always appreciate people doing far more with less.
Nice 😁👍
👍👍👍!!!
сетка для поплавков понравилась
Pretty cool
Hey very smart🙂👍
Brave man without mask when dealing with the fiber glass.
Awesome
Nice
working with sheet fiberglass like he is does NOT cause "harm". unless he's using a chop gun crazily, just laying-down and coating with...epoxy? (not sure from vid). old boatbuilder here. this guy's a genius, man!! course...I'd have considered a MUCH-smaller engine, considering. Maybe those new electric with a water propeller? I'd used a different substrate for the "hulls", too :-))) buy...heyyy~
Nice build
La pregunta gue hago esto soporta el golpe de las olas en el mar de panamá lo felicito para mi usted es un gran jenio
One mistake. You forgot to put styrofoam pieces or maybe closed sell expanding marine urethane foam into cylindrical area formed by mesh. its great to have some safety. It could be unsinkable.
Голова , руки и современные технологии творят чудеса ! Удачи вам !
Final product not same as thumbnail. Instant thumbsdown.
Ide yang sangat cemerlang sekali kak, kira" berapa modal untuk membuat 1 kapal ini?
This is not the boat in the thumbnail.
Ingenious and very well-built. You are a very talented person. Thanks for showing us your techniques!!! 👋👋👍👍👍
Wheres the champagne bottle for HMS 'People Smuggler'
While 95% of this build was fascinating from start-to-end, I was grossly disappointed to see this guy mount a gas powered motor atop the boat.
How many hours do you think you put into this? Finish weight? Local cost for this project v. purchase of a similar boat? Motor choice? Why an airboat and not an outboard? I am guessing cost was an important issue, do you access places with this set up you cannot access with an outboard?
I love the concept, hope you can scale up and build these for others.
Bloody hell!!! I wouldn't stand anywhere near that propellor. Unlaminated and Unbalanced will put some serious vibration on all those bad welds and the ultra thin bad fiberglass and there is no clutch either. A small Propellor in the water would be so much more controllable and way less dangerous.
Einfach Polystyrol so formen, wie man es braucht und dann laminieren. Ist schon deshalb besser, weil das Ding dann nicht untergehen kann, was ja in allen Ländern mit Bootsbau so sein sollte.
I'd leave the seating and motor mount removable. One may choose to update the motor and fabricating mounts in the boat is too slow for my taste.
Todo muy bien, pero esas pinches tijeritas, sacan de onda.
Thumnail gak sesui isi video...
به نظر من اون پروانه رو اگر داخل آب میگذاشتید مفیدتر بود، و سرعتش خیلی بیشتر میشد،
از ایران،Iran
Hello🎉🎉🎉❤❤
Wot?!? No drink holder?
How many family members went hungry building that 800 dollar boat ?
he goes by 50k views daily- it means 15 USD / 200 USD revenue each day.
Too bad this person isn't using a sander to smooth out the surface of the boat.
неплохо
yo estoy en agua salada y no utilizo nada de metal. como mucho alguna pieza en inox.
😅 why does It never look like the Cover photo
Keren n mantap 👍
Clickbait. NOT building boat in thumbnail.
get ur hands on a 4 blade second hand paramotor prop.. and use smaller pully wheel to gear up prop
¿Para que hace tubos si no va a inflarlos?
Защитой вентилятора всё-таки стоит озаботится.
It would also be better if you could develop a system that is not dependent on oil.
perhaps Unicorn Skittles?
@@daxtonbrownTastes and colors are indisputable. Anything can be done if you want. Technology has developed and these friends can use the techniques at a high level. It's obvious they are talented.
Si en verdad es bastante ingenioso pero sin embargo el dispositivo de navegación que él estaba construyendo en ningúna manera cumple con el protocolo de seguridad que requieren todo tipo de embarcaciones marítimas ya sea de afluentes de los ríos y de los mares en Venezuela le decomisan la embarcación por la seguridad de él y de cualquier otra persona si tiene bastante ingenio pero debe esmerarse mucho más va bien lejos no está de lograrlo así que mis mejores deseos para este señor en nombre de nuestro señor Jesucristo amen Amen
Fiberglass is fine as long as dust is not produced; i woukld even sleep under a fibergalss cloth if it is clean and still; been doing fiberglass works for 50 years,i can still run a mile...well, slowly LOL
after wetting it with resin, it's perfect, no harmat all, if not sanding it
same with ASBESTOS, thousands of folks sleep under it as their roof and it is fine, as long as NO DUST is produced, and as long no one breathes it in.
Don’t forget break pads. People who drive with the windows down inhale asbestos particles all the time on busy streets.
Doesn't look like the poster image for the video, damn click bait!
интересно сколько ушло смолы литров 10?
뾰족한 암초에 부딪히면 어떻게 되나요??
It’s going to open up like a can of tuna.
Еще под один слой. Обшить кевларом. Былоб вообще хорошо
Good job, but too much noise.
на борт наступи он обратно разогнется?
That's not the boat in the thumbnail. Very disappointing.
Why we are wasting our precious time on watching this video. The boat he made is a joke or a toy made by a child😂😂😂😂
stealing other peoples vids and putting your own watermark on it
Not the type of channel I support, reported and unsubbed
Por qué muestran una cosa y termina siendo otra, siempre engañando a los visitantes
Di jual harga berapa sampe di Indonesia?
such boat will be damn noisy, also prone to sink. the engine might total loss.
Please please where a mask. The name says it all FIBER GLASS! Once in the lungs the tiny glass particles will kill you. It's a slow painful death, like drowning and not to be able to get your breathe. Great build!
when the props flys apart and hits someone it will not be cool..... other than that kind of cool
gak sesuai templet
Meticulously Meticulous.
All this "rigorous", "metculous", "to ensure safety standards" stuff, can't you leave that out? Nobody believes that
Ele esta copiando o artigo do creative chanel.
If I could give 5 thumbs up I would!!
No es lo que muestran en la imagen. Video fraude.
Mailing address please, I'll send you a pair of cutters to make your work easier.
junk no control to loud
Meticulously...
Doesn't look anything like the thumbnail. 👎🏼👎🏼👎🏼
엉뚱한 썸네일로 낚시질하고 있네...
돈에 환장해 영상과 무관한 썸네일로 사람들의 관심을 끌어 모으고 기만하는 이런 채널들은 모두 구독 취소해야 된다..
Ça coûte cher d'acheter des abonnés et des vues ? C'est pas pour moi c'est pour un copain.
This bot didn't last long. the fiberglass he made was too thin, he should have made 1 inch thick fiberglass. for durability and safety. so that it does not break. This fiberglass floor is too thin and dangerous. don't follow the people in this video.
No way it's real fiber class. You don't touch real fiber class bare handed, idc who are. Fake
I work with fiberglass and epoxy bare handed so I don't know what you're talking about. I buy it off the roll at TAP Plastics and they cut it with scissors and put masking tape on the edged to stop fraying. Look at the videos on the product page for Boat "A" Standard Weight 7520 fiberglass at TAP Plastics. Watch their how to videos. Lol.
으아!!!!. 저걸 맨손으로????.