#homemadecuttingslider
Вставка
- Опубліковано 23 сер 2024
- #homemadecuttingslider #Diy
Awesome Angle Grinder For Cutting Slider ! Wide Format & Large Length
Dear all beloved fans and subscribers,
Welcome to my channel Mr.Rany Homehome.
If you are interested my Handiwork Crafts, I would like to show you how to make furniture made of metal, wooden products. Hope you enjoy watching my activity that you have found the channel you really need, hand made items, and the main thing is that they all made of make-shifts and at the lowest cost so you can start at home.
Please help me to like, comment,share and subscribe my channel to reach 100,000 subscribers.
With regards
Mr.Rany Homemade
Facebook: Rany Teamguide
Rany Creative
Super travail. Bravo!
Thank you for your patience. It worked amazingly without plasma but is Too old and will upgrade my new design and easy then.
I had a lot of old pipes and rebar to cut up and from what I read ua-cam.com/users/postUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
Nice idea thanks for sharing
Thanks for your comment and will upgrading to the grinder soon because can help me more thing
Woooa this video is so awesome my friend 🥰
thank you so much for sharing it with us,
your doing a great job keep it up,
may the lord continue to bless you abundantly also with fresh inspiration,
my friend stay safe and see you again soon 💐🔜🤍💯🤍💯🌹🤍
Very nice
Very good idea
Thanks for your comment
Parabéns amigo!! Seu porta máquinas, ficou muito top!! ❤️💜❤️👏👏👏👏👏👍🙏🙏🥀
I appreciate the ingenuity here and working with what you have, making the best with what you have available to you. I'm considering making one of these for myself with a few modifications to suit my needs. Excellent video.
Thank you for reaching out. I have done some machines because this
Hermoso proyecto, pero difícil de hacer para uno mismo, porque SIN MEDIDAS NO SE PUEDE CALCULAR. Felicidades por su proyecto. Atte. D.J.
Thanks so much for your kind comments about
Привет Мастеру благодарю за видео зачёт вам..блогодору за советы спасиба...,,,
Thanks for your comment
Parabéns Sr. Rany 👏👏👏
Да нормально , мне понравилось удачи.
Thanks
Is not perfect at all but I will definitely try my best,
Parabéns por compartilhar seu conhecimento
Thanks, I have done some of my machines because cutting the slider worked great with the big pieces thick metal.
Now a bit old so I will build and upgrade new one soon
Good
Thank you
Belo trabalho da dando inspiração para adaptar as nossas necessidades!
Simples mais bem objetivo e seguro era o que eu tava precisando ver vai me ajudar bastante e a outras pessoas !
Valeu muito obrigado!!!
Thank you for reaching out. I have done some machines because this
Show, parabéns
Ficou top das galáxias parabéns
Thanks for your patience to watch my video
if you add vertical adjustment for the angle grinder (by modifying the ends of the horizontal support rectangular profile, i.e) I think this is a very good and practical design.Thanks for the idea !
Thanks your comment and sharing info together, I do made angle grinder I focused big pieces and thick metal cut because impossible to purchase plasma cutting track , but I have angle grinder it making me had done good job too.
Thanks 😊
In my opinion only one side of the table is useful and with some modification to move angle grinder vertically you can keep using this tool for small discs too. Very nice work bro.!
so he can move it aong the x axis only as things stand. Vertical slide for smaller (worn) dscs as another comment says, or z-axis, and y axis for use of whole of table. the se are good points but maybe he did not need thoise. Also makes the project considerably more complicated.
Great and useful, thanks for sharing....
Thanks you you too for Watching
Good job
Thanks bro 😎
PARABÉNS FICOU TOP👍👋
You guy so clever to make all of things for use at home
Thanks my friend
Parabéns excelente dispositivo para corte.
Your work on this cutting tool has inspired me to build my own been working on it now for a couple weekends I will try get some video of my progress and post it to my channel, I used diffent materials because they were affordable, I don't know about where you live but here in Florida u.s. steel is insanely high priced
Thanks for your work, let's build this because my workshop has done a great job with it. I knew nowadays very easy-to-use plasma cuts almost everything, but my place how have lived here is very poor quality so nothing. So only this helpfu.
Thanks
@@mr.ranyhomemade2466 one of the most appealing features of this method of cutting sheet stock is by not using a torch or plasma cutter it minimizes warping the metal .
Super ok
Thanks
This slider cut the best my project
Multi bom seu trabalho Vai me ajudar muito O sua idea Deus te abençoe
Many thanks for your comment on my UA-cam video
Estupendos trabajos felicitaciones
Thanks
Thông minh quá bạn ơi
Thanks for your help me to watch videos and I do hope you like it.
I knew my work seemed to slowly cause budget and tools as want is not easy to find out and I am living in the third of World so everything I made most of my brain because things not many over here. If you enjoyed please help like and comment and sub for my improved next project.
Amin Firman Tuhan
Terimah kasih Pak Pdt
Thanks for your comment
GOOD
Many for your comment we hope can share info together
Top de mais
❤👍
Thank
cool
Thanks
Awesome slider, crappy table lol
Thanks for your best time
Now I just updated new much easier than
Making A New Slider Angle Grinder Cutting Edge
ua-cam.com/video/C5d3C2e9Rbg/v-deo.html
Is the workpiece being cut very precise? Please answer, friend
Thank you I'm not sure you mean please
great and very useful. Thank you :) What are the roller parts called?
I need to build a simpler version of this, more akin to a simple saw table.
Becasue I need to cut long thin parallel strips of Aluminium.
May be pushing the metal through a saw table is too risky and I should clamp the metal and have a moving grinder as you do.
Your thoughts?
Great video of very nice idea, thank you :)
Thanks your comment and sharing info together, I do made angle grinder I focused big pieces and thick metal cut because impossible to purchase plasma cutting track , but I have angle grinder it making me had done good job too. I do have clams protected metal as l cut angle grinder run perfect.
Thanks 😊
I built a simple saw table with the angle grinder mounted underneath yesterday.
The grinder blade is spinning away from the side I push the part in.
I completed it and used it for the first time today.
I built it using 18mm MDF.
I designed the table "on the fly", with room for (1) access to grinder switch underneath, although I switch at the wall, and (2) blade release for blade change.
It is very effective, and necessarily robust.
So far I have only tried cutting 4mm thick aluminium plate into 10mm wide strips.
With my design blade change is easy.
I can now make aluminium strips easily and accurately.
Glad I built it, making these strips is now much easier.
Thanks for the inspiration :)
I will post up basic video if I get a moment.
Excelente trabajo, por favor pondría las medidas deducir las medidas es difícil
Thanks 🙏
Profil holo dimensi berapa ukuran besi holo bagus ide kreatif
Thanks for your comment
Show bem explicado
Thank you for your interest and comments
If one could install a dedicated metal cutting blade it would cut a lot better and very little sparks.
Many for your comment we hope can share info together 🙏🙏🙏
Супер
Thanks
этого видео полным полно на ютубе. Короче один мозг на всех.
Thanks
Доброе утро! Все супер так держать жалко что не умею читать и писать на вашем языке, а можно размеры?
nice work can i have plans please
Thanks my friend
Of course it really helpful especially I using for cut thick plate metals
what bearings did You use? or depends on the bolt? (what measures?) Thanks in advance
Many thanks for your comment
I’m so happy to share.
Well, the bearings I used diameter 8mm in, 25mm out but you can use anyway as you want with bolt and the pipe 4*4 and the bed 120cm*60cm. It help me do a lot of work, Lathe, Chop Saw Cutting Steel, Belt Grinder, and Drill Press and now I'm planning to make a milling machine so I just upgraded cutting edge slider to slash cut. ua-cam.com/video/kNsmNVKk6dM/v-deo.html.
Thanks again
Suprised this does not have more views, it is closest to what I am looking for that I have eben able to find. I need to cut thin long strips of aluminium. A saw table seems closer to my needs where I pust the piece through. Anyone thoughts on an angle grinder in a saw table for metal?
Thanks for your comment on my UA-cam video.
It was amazing and helpful for my work and had done more things with a guy especially to cut plates thick metal. and will be upgrading more to be easier soon.
Класс
Thanks your comment
Como faço pra conseguir o desenho desse dispositivo com as medidas? Brasil
puedes poner las medidas por favor ...gracias
v groove gate bearings and a flat bar would have been way way simpler and cheaper
Thank you Recommended.
Is not easy to find. But I'm happy with it helps me a lot to have done some machine
@@mr.ranyhomemade2466 they are used on gates. Very cheap. 2 dollars usd each. Even in Philippines easy to find
make the arm holding the cutter longer, then the cutter can lower it deeply
I do love it because all my machines as I made because it
45 градусов нету ?
👏👏👏👏👏👏👏🇧🇷
ببخشید قیمت اش چند است
Xin giá bộ này ạ
Thanks you
Тяжело идёт,как будто не на подшипниках.
Thanks
Máy này bán bao nhiêu mình muốn mua một chiếc
Mua được chưa bạn
1 bolt is not enough. The tool is traumatic and needs the best fixation. When biting the disk, the angle grinder will try to run into the material, and the bolt will not be strong enough to bend and will bend. In this design, cutting material is possible strictly from left to right. Otherwise, a crash may occur associated with the angle grinder running into the material when biting. The angle grinder's leash is too short, which does not allow the use of a small disc. But in general, even such a design is better than sawing sheets without a mechanism.
Thanks for sharing and your comment I thought is not perfect at all but it helped me a lot to next project especially to slide cutting big plate metals are like homemade lathe, chop saw welding table and more, I want make equipment to be good but in my country is not easy looking for and cost so expensive.
Thanks again
I am not happy noting that there are very few views to your smart ideas so I guess something is wrong with the title?? further I guess you have to work on the audio too. Video is very clear but your speech is heard hardly and the music ..........its a positive comment so please dont mind it.
Thanks for your recommendation
I knew not that good because I haven’t enough tools and not that strong sounding audio all my videos as I did just by phone and upload by phone I needed more equipments but Budget...?
I really appreciated your comment
Mui buena creación 😮
Thanks for your best watching. I do love my homemade but everything that expectations is not sound the plan because I spend over my budget compared to my income and hard work because don has any tools and equipment. Now not sure keep doing it or not.
Thank you again
Potong 45° ngga ada
Thanks 🙏
hopeless device. waste of electricity and time.
Thanks. I living in the third country so everything is not perfect cause by hand
Great start God bless
you can make something useful then...😂
Muy buen trabajo, con todo respeto, ¿que significado tiene las uñas largas de los dedos meñiques? Se ve muy mal, en mi país se relaciona con la delincuencia
Thanks for your comment
The reason you dont see these commercially is because these things will kill you when they are on a swivel like that. Its brilliant and basic but extremely dangerous set up this way