How to Make a DC Motor at Home (Cardboard DC Motor)
Вставка
- Опубліковано 5 вер 2024
- How to Make a DC Motor at Home (Cardboard DC Motor)
Today I'll show you How to make DC Motor with cardboard without using glue gun step by step.
things required
- cardboard
- glue , super glue
- pen refill
- copper wire 30 gauge
- magnet
- bicycle spoke
thanks for watching .
Can you make a video about how to make a nuclear reactor out of cardboard? Asking for a friend, thanks
Yeah but I need a nuclear bomb,it's kinda personal
Hvh
I want a hydrogen bomb for new year eve.
How r u supposed to make a nuclear generator out of card board XD
Mr beast?
It actually resembles a 'real' DC motor instead of merely being a mashed-together science demo, unlike most DIY motors. Bravo
is turning it manuay makes electresity like a dc motor????
It does@@chillarea9689
yes@@chillarea9689
I don't know why people dislike such a interesting thing
cause its fake the copper will heat up soo much it will burn the card board
I'd say this can win the best youtube DIY video reward...just sayin.
This is the most well done diy motor project I have found on UA-cam. Thx
Dude, there are so many better motors made on youtube. Check out "American Tech". He makes much better motors for many purposes!
this one is probs the best one out here. you inspired me to 3D print a big motor, with a 12 segment rotor, and a 12 segment commutator.
Impressive how you made such a complex thing in such simple way
complex
* complex *
while a 10 minute long video can explain how everything works
With how simple dc motor actually is, it makes me wonder why humanity didn't invented it thousands of years ago..
The battery you need to power it is less simple
There were no electricity
I am from India and this DC motor is in our syllabus😁
Congo tumhara board cancel ho gaya
@@chandrasekharsamal thankyou brother😄
@@thakuradityarana6240 main toh abhi abhi 10th me aya hun 9th ka final kal hi deke aya hun, apka 10th ke bad kya krne ka irada hai?
Finally, a DIY do it at home video that is REAL and isn't fake or dumb
Fake asf
@@SouhridPalVines How do you know? Do you even have any knowledge of engineering?
Clearly, the motor uses electromagnets and magnets. Basically these electromagnets on the rotor switch polarity momentarily to turn the rotor.
So shut up if you don't know ANYTHING about electronics.
@@suspense_comix3237 yeah maybe ik less than you, and infact you are right... But in this video, the insulated copper wire is coiled around pieces of cardboard, whereas in real motors the wire is coiled around thin sheets of iron or steel... This helps in generating larger electromagnetic field, also the metals are used as sheets so that the eddie current generated within the metal won't cancel the electromagnetic field. Also to your surprise, the magnets used are so weak, they won't even be able to pull a safetypin from 1inch distance whereas the working DIY motors use neodymium magnets... Also the blade method for transferring current to the coil generates huge amount amount of friction, resisting its rotation.... Also, 65 turns is such a small number of turns, instead using thinner wires and more number of turns would have helped... So yeah maybe I don't have any sense of ELECTROMAGNETISM or so called DC MOTORS
But I do have a small amount of knowledge to crack JEE
@@SouhridPalVines Fine. Fair point.
@@suspense_comix3237 i clutched you baby
It would have been better if you made the armiture out of canned food lids or thin steel plates as the coil magnetizes the steel.
Very easily I like it 🎉
Kon kon meri tra ies video Ko 2024 ma dekh raha hai
2028
Mei
WOW YOU ARE SO INTELLIGENT!!!! I wanna try to make a DC MOTOR!!!!!!
Cool man, now I'll build one myself
Mee too
this is just genius, i cannot belive how good you are.
very nice sir
good work
dil se Thanku very much......
......
This is actually quite good. Next, make one that is open so you can see the inside spinning.
Pjbc from
@@gpstore.lakshmip972 via text💬📱📳📳💬
This is a dream 🤣🤣🤣
Super 😵😱😱
I am also seriously impressed . That's an amazing job
That’s amazing I needed to see this except I’m going power my negative and positives with solar panels. Thanks!!
*
Ako val howa no gadh garo this is cow
The beauty of simlicity
why doeas the music hit so hard? nice
Finally i can make my car
Super bro
Congratulations bro
I'm just here to make it to make a generator lol
I have built it myself before watching this video. I uesd the lead of pencil which gave me extra energy.
They don’t use lead dumbass they use graphite
That's great. Thanks for the video
Amazing! A perfect project to explain induction to my pupils. Thanks a lot.
Lets make the moment to appreciate how much effort he puts in a video for us
@Black RobiBrain what was the commutator (contacts) made of?
🎉🎉🎉🎉🎉😂😂😂😂❤❤❤❤😢😢😢😢😅😅😅😅😅😊😊😊😊fhbhkbdthjnbvhjbvfyikmm
thanks the best video 👍👍👍👍👍👍
So a DCmotor that works on AC current, Cool
amazing...really good
Very nice motor👌👍💕💕💕
Wooow next vedio on brush less motor...👍👍👍👍 I thing u have to made it😋😋
Your grammar is broken dude
I like the Idea using cardboard, cause of unique colors
very good project for school assignment. Keep up!
Hello!I also have a similar video to it
this tutorial actually has stuff i have around the house
Expected a hobby DC motor slammed into cardboard. Well this was nicer. GJ
Awesome👍👏😊
The beauty of simplicity!
mine works!!! thanks for the "tutorial"!
Music is very awesome
I will make this at HOME
nice yar like it aur video banao
very good motor
Such a clean motor!
wow very good ❤❤❤💞🙏🙏👍👍
This is the best electronic project I have seen on UA-cam so far....the rpm depends on the strength of the neodymium magnets and the number of turns used....in your case can you please tell what is the rpm for a 12 volt dc source?
it actually doesn't depend on voltage, it also depends on amps of the battery/power source. you should try testing it with a 12v 7ah lead acid battery.
@@Siddhant-Mashalkar isn’t that a car battery
@@wavebuilder14udc75 Car battery and Lead Acid battery are different.
Can someone tell me what's the application of armature in dc motor...i mean it could be lighter if it's not made of iron/steel
@@Siddhant-Mashalkar but car batteries ARE lead acid batteries.
The coil you make on card board it cant be a electro magnet.. To be a elecro magnet it will wont on a metal / iorn core..
how do u know abt it?
Thank you so much because I am thinking to make hydropower electricity that uses dc motor
V
You need a generator for that
Thank you bro for this video I am very happy with this video and now please tell me how to make a water pump for small motor only and I have seen many water forms but it was fake and you are really my true maker thank you black Robo brain
thanks for your comments .
ok , I'll try .
Black RoboBrain thank you
Are bhi pehla physics parho
Bina iron core ar magnets k DC motor kaam nahi karta ha
Do you strip each coil that is attached to the commutator completely? or is one or more of them only half stripped?
Wow 😳 amazing bro 😍 thanks ☺️😊🙏🙏🙏💖💖🇹🇳🇹🇳🇹🇳🇹🇳
Such a nice videos
Super easy.. couldn't even draw lines on cardboard.
Superb friend its very cool👌✌😮⛄
Very fine motor..?😙😘😚
I am seriously impressed that's an amazing job.
Even though all electrical inventions are better than yours.....they are nothing without you
Sir how many turns should take for 12 volt supply
Wow amazing great video
brilliant 💡💡
Hey
Very nice
i haven't like any video but this one is another level
Wow super bro
Nice job friend very nice mc motor
IT IS NOT MC IT IS DC
Nic
Finally... I can make my own Tesla!
My thoughts exactly , I've been watching cartboard f1 rc earlier ...and said...hey but I don't have a motor ,now all I need is a cartboard battery and I'm set to go lol
lol
With max speed 2km/hour
Sorry fghjkl
Gdskus
Xfdyhuf
Ifyrfk
Ytyj
Jhh
Kaash mere pass bhi itne saare saman hote 😌
you are awesome....👍👍😶
Very amazing bro
Nice one
Wow superb
Nice motor I think so good
That's great
HjbbNC childhood hubbbbJacksonville
It is very easy to work
Excuse me, how do you do those little metal parts? 0:50
Idk how he made them, but I'm gonna try to make mine from soda cans
@@cheesemonster7671 Oh, thank you
@@cheesemonster7671does it work
very very good
Good and nice
I am inspired by this
Good bro really nice
They are awesome @😊
That's awesome!! Very clever, thanks for the video :)
Jsfyshjsgsyzjs figure
Intelligent would be a word better than clever for this innovative mind.
Bro, take a real dc motor and observe it. Any electrical engineering student can do that.
See is very nice idea
incredible engineering
Very nice and good
OMG the pencil he was writing from was very big XD
Ok,so
oooooh it was small
Hola qué tal Muchas gracias Esto me servirá mucho en un proyecto que estoy haciendo trataré de hacer el motor más pequeño
brilliant idea brother👍👍👍👍
Very interesting and Impressive work 👌👌👌👍👍👍 Keep it up.
I'm so happy for you video
This is super cool, the creativity and the engineering are excellent but if your ever overvolted or short circuited the motor it would burn up.
I like how he did the math as if he didn't know 120° was 1/3rd of 360° 😅lbs
Fantastic fantastic fantastic there is no words to you
plz can u tell me how to increase the speed of the motor or could u make a video on it? :)
Get a 12 volt motor or increase the voltage without blowing up the motor.
use motor speed controller
In order to make it ave more power and speed you need to increase the amount of turns of the wire and how large each turn is, also putting in more powerful magnets will make it more powerful, just not that strong so that the motor won't move!
@@technicboy5917 thanks mate i will try that
Your welcome. Oh, also try making the casing out of more durable materials like wood or plastic and somehow get the motor attached to a bearing. This will be very difficult to do for this motor, but if you have a look at "AmericanTech", (which is a youtube channel) and they can make much better motors than this.(Its also not that hard):)
awesome awesome awesome
bravo bravo bravo
amazing dude keep it up
Cool design, what glue did you use?
Fevicol and flexkwivk
That's called super glue bro
Really hard work
good
Very good 😌😊☺️🐱😃😸