I have 2014 honda fit hybrid. Mostly cars are manufactured under regional conditions. I observed fit experienced gear issues in hot regions..because 1.3 ltrs can't reach to the top of gear inside where shifter assembly is working..+ when engine block heats up, it heats gear case so to shifters inside the gear box, so amount of atf gets dry or evaporates because of hot gearcase making shifters inable to shift. Best pouring capacity here in pakistan is 3-4 ltrs, so that each gear gets its lubrication. Thanks for your upload.
@Tariq Asad are you crazy!!! Don't put 3-4 liters of ATF DW1!! Are you loosing your car's manual?? 1.3 liters is according to car manual and sufficiently enough. This is also according to Honda Workshop manual for Fit Hybrid GP5. I also own this car which is manufactured in Malaysia which also hot and high humidity climate. Don't put out wrong info!!!
@paulmeehan1978 hi Paul, I'm in Ireland as well, I'm looking to do the CVT oil change on a 161 Honda Shuttle, should be the same as your car isn't it?
Hi there, may drain plug broken when I changed the fluid. And I can’t find any store or Honda dealer at Australia, because Australia doesn’t sell Honda Fit. So, can you tell me where I can buy drain plug Honda fit 2015? Please
@@paulmeehan1978 that's cool, I don't need to undo transmission pan then. Also, do you know oil capacity? I mean for the whole gear box, not 1.3L when you change. I couldnt find any data online? thanks
For me is 1.5L of dw-1. Dont over fill over this capacity as the gearbox will be overfilled and will leak all over the place, once that happen u need to overhaul the gearbox to change all the O ring and seals
@@paulmeehan1978 I have a honda Fit hybrid and the car is showing on dashboard transmission inspection, code P1737 when scanning, but I can't fell anything in the car, I think it is a electrical error or something like that, do you work on it? I can take the car to you. I live in Dublin. Thank you
Good video I appreciate it, please make more on the Honda hybrid fit
I hve honda fit GD1 or 2001 model CVT TRANS.. WHAT IS CORRECT CVTF capacity? i do not have user manual.🙁
Great video but I wish you tell us the amount of oil you use.
I use 2 quarts to reach my fill level. Any advice
I need my transmission fluid changed on my 2017 fit
How much does it cost to get it changed
Wow, so easy to do and then the Honda dealership charges me €88 for this... Next time, I'll do it myself. Tnx for the vid!
You have 2 clutch reservoirs beside each other @6:39, why not fill them with new fluid?
My Honda fit hybrid Gp5 gearbox over hitting, how to fix problem please assist me
How many liters need fully change?
Great video.. north or south sider?
What year Honda Fit Hybrid is this?
Great help
I have 2014 honda fit hybrid. Mostly cars are manufactured under regional conditions. I observed fit experienced gear issues in hot regions..because 1.3 ltrs can't reach to the top of gear inside where shifter assembly is working..+ when engine block heats up, it heats gear case so to shifters inside the gear box, so amount of atf gets dry or evaporates because of hot gearcase making shifters inable to shift. Best pouring capacity here in pakistan is 3-4 ltrs, so that each gear gets its lubrication. Thanks for your upload.
Good comment , I live in Ireland so not to hot or cold
@Tariq Asad are you crazy!!! Don't put 3-4 liters of ATF DW1!! Are you loosing your car's manual?? 1.3 liters is according to car manual and sufficiently enough. This is also according to Honda Workshop manual for Fit Hybrid GP5. I also own this car which is manufactured in Malaysia which also hot and high humidity climate. Don't put out wrong info!!!
@@RamzieFarhan you are correct.
@@paulmeehan1978 where are you based? I have Fit Gp5 but not sure which garage should I go? Thanks
@paulmeehan1978 hi Paul, I'm in Ireland as well, I'm looking to do the CVT oil change on a 161 Honda Shuttle, should be the same as your car isn't it?
WHAT OIL DID YOU USE? I HAVE A FIT 2015 HYBRID.
Hi, where are you based?
Is it ATF or CVT?
Those 2 yellow dots compartment 4:41 those are Dot 4 fluid? Should I change in the same procedure? Attenuator for the dual clutch? Thanks
Yes. It runs outside of thrust bearing. When changing clean boxes and pour dot 4.
I have Honda vezel oil leaks minor from drain plug what should be the reason please help
Most likely it needs a new drain plug seal / washer
Hi there, may drain plug broken when I changed the fluid. And I can’t find any store or Honda dealer at Australia, because Australia doesn’t sell Honda Fit.
So, can you tell me where I can buy drain plug Honda fit 2015? Please
Wanna get it here in kenya
Hey thanks alot.
Was it a CVT or regular transmission
DCT 7-speed
1:30 is this the transimission filter? do I need to change it when change oil? or is there any filter built in gear box ?
You can clean this , it doesn't need to be changed . I cleaned it with some new transmission fluid and a tooth brush.
@@paulmeehan1978 that's cool, I don't need to undo transmission pan then. Also, do you know oil capacity? I mean for the whole gear box, not 1.3L when you change. I couldnt find any data online? thanks
@@user-ht8vg1hu1b ATF DW1 capacity for whole gearbox if newly replace or overhaul purposes is around 2.1 liter or 2.2 US qt.
@@RamzieFarhan Thank you so much
I need gearbox for gp5 2014 honda hybrid please
Here is a link to buy one
I have the same Honda Fit Hybrid for which the manual suggests 1.3 litre of transmission oil. How much did you use ?
I used 1.3ltr .
Shahzeb its better if you pour in 3-4 ltrs. Atf dw1. You will never get a transmission sign.
For me is 1.5L of dw-1. Dont over fill over this capacity as the gearbox will be overfilled and will leak all over the place, once that happen u need to overhaul the gearbox to change all the O ring and seals
@@tariqasad19 this is DCT not CVT...... 1.3litre as per manual
What is the service interval for the transmission?
25k gear oil atf dw1+ 15-20k for dot 4 here in pakistan.
In singapore is aft DW-1 30k km, the clutch actuator DOT4 20k km
Can HCF-2 transmission oil be used?
No, HCF-2 is for CVT . This 7DCT Fit need to use ATF-DW1 fluid
Oil was in perfect condition.
Why changed
Mite look perfect but it will have lost its viscosity. Oil should always be changed when its due regardless of condition. Ur welcome.
Are you based in Dublin?
Yes
@@paulmeehan1978 I have a honda Fit hybrid and the car is showing on dashboard transmission inspection, code P1737 when scanning, but I can't fell anything in the car, I think it is a electrical error or something like that, do you work on it? I can take the car to you. I live in Dublin. Thank you
Sorry for taking so long to get back to , that fault you're having is not something I can do , you will need to bring it to an automatic specialist
How much atf does the 2011 Hybrid fit take also what brand and type does it take I'm in Dublin myself and got code with spanner today on dash
How many litre of oil used
This car took 3.4 LTRs but check as your car may be different
Sorry wrong capacity , 3.4ltr is engine , transmission is 1.3ltr