I'm a fan of Taurus and have a G3c, G3, TX22 and a 6"M66 357 magnum AND a Rossi 22 rio bravo lever rifle in wood. Love them, all have been great for my needs and budget! I really like the 605 Executive with the hammer! I also love that 327 3" toro but if possible I would add a hammer to it if the single action is still operable?? The new single action cowboy revolver is interesting to me but have never even shot one lol! I like other models they have too and am sure I will end up adding some more eventually! Thanks for sharing and Thanks Taurus for making some nice firearms affordable for many who otherwise couldnt afford them! 👍👍
You commented something interesting about Taurus and I completely agree with you, which is Taurus' role in the market. I think average gun prices in the US would be substantially higher without Taurus and their good, reliable guns. Nice comment! 👍👍
I have a 2018 G2C and I’ve got around 8000rds through it and I havnt cleaned it once. I still haven’t gotten it to jam. Not a carry pistol, jsut an experiment. I’m impressed. Though the trigger is ass
That's definitely taking it out of Rugers school of thought for their SA revolvers (I own the blackhawk) And WILL NOT complain if Taurus does it too. As long as Taurus's design is capable of long term wear and tear so fingers crossed...
My first 2 handguns, in the early 90s, were Taurus. A PT 92 and a 441 5 shot 44 special. Still have the 441. 6 inch barrel with custom trigger and milled compensator.
I own Ruger, s&w, colt, Sig, Springfield,mostly collectable. i just love guns i own a few Taurus too they are really well made and very economically priced, i use them when i travel so if i lose them i can buy a new one. would like to see their cowboy gun in 22 to compete with the Ruger single six...
G2C/TX22 owner here. My G2C had a few failures at first due to me not knowing correct cleaning/oiling/hold procedures. First round ever shot was a steel case, it got stuck. I think after the 2-3k rds I've shot ( all brass and a few alum) it would probably cycle steel now. The TX22, everyone should own. Best 22lr I've ever owned. Literally a blast. I upgraded both pistols with an erray of Lakeline guide rods, fiber optic sites etc. The G2C has had no failures with my EDC ammo to date. I carry Speer gold dot 115gr. The TX22 prefers standard ammo. CCI/AGUILA lead( less recoil=less wear) I've had 3 slides break at the brittle point at the muzzle end on my TX22( it has to be a common issue) .Taurus really does stand behind their products. If you're the original REGISTERED owner, call them, they send a label, they just install an entire new top slide (so take off any aftermarket optics etc.) and send it back. It took literally 1 week from me posting it in KY, going to GA, repaired by Taurus and back in my hands in KY 7 days total. Taurus is and will be the only line of pistols I'll carry and trust. Just too much greatness for one comment. Thank you Taurus. You are the example of what a firearm company should be in every way. Hope someone enjoys and learns a bit from my comment.
Gary from Idaho Falls says hey! I recently bought the Taurus Home Defender and adequate (hard to find) ammo for it. Added a red dot for accuracy and will get a scabbard for it soon. I bought it for home defense due to its compact size and the choice of either 410 or 45 Long Colt.
Hey Gary! Have you shot the Home Defender much? I'm curious what you think of it, it really got my attention at SHOT Show. Thanks for watching and commenting!
@GizzardGary living in Idaho I have not fired it yet. Our winter weather is not conducive to outdoor activities when you are in your late 70s. I have fired Judge guns in the past and expect this to be much the same but without as much felt recoil. I will let you know once I can shoot it.
Keep in mind that Taurus tends to offer budget-friendly products, so their primary offerings may not have all the bells and whistles that others offer, as they are trying to cut costs. With the Executive Grade line, they add a few nicer options, for those who are willing to pay extra for them.
I have had a few pistols from Taurus, but favorite is the old 709 slim. Bought it when it came out , it will shoot anything that is loaded in it without failure. Thought about trading it a few times but I don't think that it will ever happen. Wish they still made them so I could a couple more.
Yes, the 709 Slim gave way to the G2S, I believe, which also is no longer made. I do not see a G3S offered at this time. The G2S had virtually the same slide as the G2C, with a slightly thinner grip, so it wasn't much smaller overall than the full-size model. I don't think it was a big seller. Everyone wants bigger capacity now, it seems.
I just recently purchased a new Taurus 942. It was defective out of the box, would not ignite any primers. Sent it back to Taurus, after waiting 3 weeks for an update they finally answered their customer service line. They said the frame was so defective they would need to destroy the firearm and issue me a new one, replacing the serial number. Wait 8 weeks for delivery and I have to do an FFL transfer AND pay for it. Just a heads up.
The GX4 is fantastic. I’ve had the G2 mill pro since it came out wayyy back. It has several thousands of rounds through it. The GX4 is improved on purchase in hand. It feels good and secure. The TX22 is a serious comp shooter. It’s fast. The action does not delay your trigger pull speed. Run it as fast as you can squeeze and it’ll outpace your ability. Everyone’s creeping to Canick which I own an sftx and it’s fantastic but Taurus keeps their prices right. Canicks jacked their prices up three times putting it into mid grade. competition. The home defender , although a niche gun, can be affective from the hip with high spread 410’s I’m sure. 410’s are great because the report and the recoil is minimal and followUps much easier to do.
Ive written Taurus off. Had a gun that didnt cycle correctly because the timing was off. Sent it in for warranty. Got it back as if they didnt do a dang thing. Spent 70 dollars on special shipping that they required, and it was just a big waste of money. The thing could kill the shooter with bad cycle timing. It's sitting in my drawer never to be used because i cant sell it in good conscious and my gunsmith wants more than I am willing to spend to fix it. Scrap metal at this point.
They should have released a 7 shot 9mm revolver with a 3in non-ported revolver… 9mm out performs the 38spl , less recoil than a 357 mag and has a unbelievable amount of self defense loads and bullet weights from 90grs to 150grs Standard pressure, +P & +P+ Even hardcast offerings 9mm is much less expensive, which equals more practice
Well, they do already have the 905 Concealed Hammer, which is a 9mm revolver with a 3 inch barrel. It's only a 5-shot cylinder - not sure you could squeeze in 7 on that cylinder, you want plenty of steel between each chamber, especially given the pressures of 9mm. But, it's close to what you were wanting.
Some really nice guns. Now if only they would sell parts so you can safely fully clean you pistols. If you do lose a part, the gun is a loss unless you sent it to Taurus for "repair."
I really dig the Defender 327mag With mirco red dot . I've been nothing but pleased with taurus and rossi. My 608 4in stainless was a tank of a 357mag.
You see a lot of 327 ammo on your local shelves? Ive literally never seen a box. Online it costs as much or more as 357 ammo. Why pay more for a weaker cartridge? One extra round?
I have the Taurus M66 6" barrrel .38 SPC/.357 Magnum, a Taurus PT111 Millennium G2 9mm., and a Rossi R92 in .38 SPC/.357 Magnum. The G2 can use the PT24/7 17 round magazines.
Man I wonder if Taurus have gotten any better. I have owned about 10 different g2c and g3c with 7 of which being sent back to taurus and them sending me a completely different gun each time. The last one that I got was a g3c last year in november. Took er home, oiled her and cleaned out the factory grease. Brought it to the range next day and after firing a box of remington 9mm the gun no longer fired. Took the gun apart to find out why only to find that the firing pin broke in two pieces. Contacted good ol taurus to get it taken care of like last time. Still havent gotten that gun back and once I do I am going to sell it for 20 bucks like those guns are worth.
Well id definitely be more interested in the new stuff. Especially if i wasn't still waiting almost a year for the 2023 Raging hunter 500S&W. Which was ordered and paid in full for last April 2023 when i call they tell me there sending them out by the semi truck load. But no one seems to have them anywhere in the United States.
I hope they make that new 3 screw single action revolver in rimfire some day ..... I wonder if that deputy has a transfer bar or some kind of hammer block safety on it.
So in regards to that last judge. Is it safe to fire that revolver with your support hand out in front of the cylinder? I've always heard keep both hands behind that cylinder. Saw a video of someone holding a hot dog along side of the cylinder when firing. Ha, that's not where i want any of my body parts to be.
My brother has judge, it's badass at 75y, don't need no optics I had G2C POS , so I'm worried about the similar models Had a 1911 officer, very good, and still have spectrum, excellent pocket pistol even with the worst trigger ever made...just got to learn the trigger......and I hit pop can at 40ft 7 of 7 The G2C makes me worry about buying a Taurus.......my brother nephew and work partner all got crappy G2C
I just bought a 605 revolver and am curious about the hole in the cylinder lock block. Most revolvers are solid when viewed from the side, but the Taurus when viewed from the side almost looks like a ring. Does anyone know why?
I own several Taurus firearms and happy with them all.... But.... What did Taurus cheap out on my Tracker .357 and Tracker .44 Magnum putting an orange sticker on the front sight? That sticker didn't make it through a box of shells. Now the front sight is just useless black. Yes I can upgrade the sight ($$$) or paint it .. But really? A sticker??
I got to the point that I didnt want to carry my G19 anymore...too big/heavy.....getting old sucks, and i do not recommend it!! Anyway, I bought the G3C and was pretty well impressed with it. I can shoot it well, and it has performed flawlessly in the ~2500 rounds I put through it. I saw the GX4 and thought I'd give it a try and it is a very nice, well done pistol....BUT....I can NOT shoot it well. I tried everything to get it to where I needed to be and nothing worked. Sold it to a friend who LOVES IT!!! Back to the G3C and that is just fine as it does exactly what I want it to do, which is hits what I aim at and stays ON ME when I go out. And THAT is the important part!!! I may see if there is a local range that has a GX4 Carry for me to try, and I am intrigued by it!! I AM going to get that 327 in the 3" I think. Thanks for the great vid and thanks to Taurus for their efforts to keep affordable, quality firearms in the hands of WE THE PEOPLE!!!
@@GizzardGary Yah I figured. A lot of hispanics with that name just tells non-hispanic people they see their name is "George" because they know if they say the way it's really pronounced it will just get butchered. I just think it's kind of funny, lol.
I'm so tired of people saying 10 mL is only for Woods protection or bear defense it's the type of bullet that you run go look at a Nosler 135 grain or the xtp 155 grain or even the xtp 180 grain go with Underwood Buffalo Bore that's made for people defense not bears why do people not know what they're talking about in the gun community bear defense nonsense
I have a G3c and TX22. Both are very reliable through several K rounds. Taurus has stepped up their game.
I love that 3 inch 605
I'm a fan of Taurus and have a G3c, G3, TX22 and a 6"M66 357 magnum AND a Rossi 22 rio bravo lever rifle in wood. Love them, all have been great for my needs and budget! I really like the 605 Executive with the hammer! I also love that 327 3" toro but if possible I would add a hammer to it if the single action is still operable?? The new single action cowboy revolver is interesting to me but have never even shot one lol! I like other models they have too and am sure I will end up adding some more eventually! Thanks for sharing and Thanks Taurus for making some nice firearms affordable for many who otherwise couldnt afford them! 👍👍
Thanks for the comments and for watching!
You commented something interesting about Taurus and I completely agree with you, which is Taurus' role in the market. I think average gun prices in the US would be substantially higher without Taurus and their good, reliable guns. Nice comment! 👍👍
Agreed. No issues with my Taurus revolvers. I want a .327 defender with the hammer. Thanks to PSA also for their rate affordable handguns.
Them g series is like glock n signhad a kid same set up sight they run Sig mags flawless ❤
@@scottschreiber6008I would want a hammer too.
Taurus has really stepped up their quality game! I own 3 of their products and have had no issues with any of them! Right on Taurus! 👍
I don't own any Taurus, but the Judge Home defender is pretty cool.
I thought so too, thanks for watching and commenting!
I've been watching and waiting for that 3" .327!
Ok, I just got to have that Deputy, Th 10, and the Home Defender. Thanks for sharing Gary
You betcha!
I've got the TH45 and it's awesome.
The TH10 is very interesting, indeed. I am waiting for a 'mid-size' version.....maybe....lol
That GX4 Carry in FDE is calling my name.
My G2S is my everyday carry. Been a fan of Taurus since the late 80's.
My first pistol was a Taurus G2C and I love the fact that it can fire any and every kind of 9 mm ammo aluminum steel etc
I have a 2018 G2C and I’ve got around 8000rds through it and I havnt cleaned it once. I still haven’t gotten it to jam. Not a carry pistol, jsut an experiment. I’m impressed. Though the trigger is ass
They have excellent pistols at the price they are charging. It’s actually sinfully underrated.
Judge Home Defender I have to get one.
TX22 Competition GOAT!
Nice new guns and options. Like the Deputy and the new .327Magnum also.
Lets go Taurus!
Good video and information. Thanks for sharing 👍🇺🇸
You bet!
Taurus has surely improved... I'd buy one.
Ruger makes a 357 revolver that comes with a 9mm cylinder. If Taurus does that with the deputy, I'm all in.
That's definitely taking it out of Rugers school of thought for their SA revolvers (I own the blackhawk)
And WILL NOT complain if Taurus does it too. As long as Taurus's design is capable of long term wear and tear so fingers crossed...
Th10 and Deputy me want.
I thought you would like the TH10, I made sure he threw that in for you.
Thanks for informative video Gary!
You bet!
When you said Jorge, I thought you said George and the cat finally got a job to carry his own weight!
Good stuff, Gary. I like the look of that 327.
LOL, thanks!
I've always liked Taurus firearms. They've always been reliable for me. I've owned dozens. You can't beat that warranty either.
I mentioned the warranty in my commen and I agree with you 100%. Best service I've ever received on any product( not just guns)
My first 2 handguns, in the early 90s, were Taurus. A PT 92 and a 441 5 shot 44 special. Still have the 441. 6 inch barrel with custom trigger and milled compensator.
I own Ruger, s&w, colt, Sig, Springfield,mostly collectable. i just love guns i own a few Taurus too they are really well made and very economically priced, i use them when i travel so if i lose them i can buy a new one. would like to see their cowboy gun in 22 to compete with the Ruger single six...
Ive been trying to break the automatic 1911 habit and try something else. Finally popped for G2C, and then found G3C for not much more. Happy so far
G2C/TX22 owner here. My G2C had a few failures at first due to me not knowing correct cleaning/oiling/hold procedures. First round ever shot was a steel case, it got stuck. I think after the 2-3k rds I've shot ( all brass and a few alum) it would probably cycle steel now. The TX22, everyone should own. Best 22lr I've ever owned. Literally a blast. I upgraded both pistols with an erray of Lakeline guide rods, fiber optic sites etc. The G2C has had no failures with my EDC ammo to date. I carry Speer gold dot 115gr. The TX22 prefers standard ammo. CCI/AGUILA lead( less recoil=less wear) I've had 3 slides break at the brittle point at the muzzle end on my TX22( it has to be a common issue) .Taurus really does stand behind their products. If you're the original REGISTERED owner, call them, they send a label, they just install an entire new top slide (so take off any aftermarket optics etc.) and send it back. It took literally 1 week from me posting it in KY, going to GA, repaired by Taurus and back in my hands in KY 7 days total. Taurus is and will be the only line of pistols I'll carry and trust. Just too much greatness for one comment. Thank you Taurus. You are the example of what a firearm company should be in every way. Hope someone enjoys and learns a bit from my comment.
Thanks for watching and taking the time to make such a great comment!
Nice additions.
Thanks!
I have the gaucho in 357. Been running with out a hiccup. Glad to see Taurus bringing back the single action
That judge home defender is bad ass
Really excited to see how they did on the Deputy. It is about time we saw the Gaucho II.
I love my Taurus, I just wish they would bring back the .41mag revolvers. I only have my snub nose now.
Gary from Idaho Falls says hey! I recently bought the Taurus Home Defender and adequate (hard to find) ammo for it. Added a red dot for accuracy and will get a scabbard for it soon. I bought it for home defense due to its compact size and the choice of either 410 or 45 Long Colt.
Hey Gary! Have you shot the Home Defender much? I'm curious what you think of it, it really got my attention at SHOT Show. Thanks for watching and commenting!
@GizzardGary living in Idaho I have not fired it yet. Our winter weather is not conducive to outdoor activities when you are in your late 70s. I have fired Judge guns in the past and expect this to be much the same but without as much felt recoil. I will let you know once I can shoot it.
Great video Gary
Thanks!
Their "executive grade" looks like what any and all revolvers should look like lol.
Keep in mind that Taurus tends to offer budget-friendly products, so their primary offerings may not have all the bells and whistles that others offer, as they are trying to cut costs. With the Executive Grade line, they add a few nicer options, for those who are willing to pay extra for them.
Something for everybody at a good price is their path to success.
Holy GIZZARD NATMAN
Wish they’d bring their ar lineup to the US
That was fun.
Im a fan of Taurus. I got a g2c and a mck kit and I plan to get a G3 eventually to keep inside the MCK.
Would love to see a 9mm in the tx platform, or maybe just the trigger from the tx model used on the g3
Should call that home defender the Tubbs
Love them i run 20 round Sig p226 mags with a Lakeline LLC SS guide rod and fluted barrel ❤
I have had a few pistols from Taurus, but favorite is the old 709 slim. Bought it when it came out , it will shoot anything that is loaded in it without failure. Thought about trading it a few times but I don't think that it will ever happen. Wish they still made them so I could a couple more.
Yes, the 709 Slim gave way to the G2S, I believe, which also is no longer made. I do not see a G3S offered at this time. The G2S had virtually the same slide as the G2C, with a slightly thinner grip, so it wasn't much smaller overall than the full-size model. I don't think it was a big seller. Everyone wants bigger capacity now, it seems.
Jorge Spat some Taurus facts at us.
I just recently purchased a new Taurus 942. It was defective out of the box, would not ignite any primers. Sent it back to Taurus, after waiting 3 weeks for an update they finally answered their customer service line. They said the frame was so defective they would need to destroy the firearm and issue me a new one, replacing the serial number. Wait 8 weeks for delivery and I have to do an FFL transfer AND pay for it. Just a heads up.
That's horseshit
My daily carry is a GX4 Gold Edition. Great weapon.
I would like for Taurus to get some 22s into stores.
The GX4 is fantastic. I’ve had the G2 mill pro since it came out wayyy back. It has several thousands of rounds through it.
The GX4 is improved on purchase in hand. It feels good and secure.
The TX22 is a serious comp shooter. It’s fast. The action does not delay your trigger pull speed. Run it as fast as you can squeeze and it’ll outpace your ability.
Everyone’s creeping to Canick which I own an sftx and it’s fantastic but Taurus keeps their prices right. Canicks jacked their prices up three times putting it into mid grade. competition.
The home defender , although a niche gun, can be affective from the hip with high spread 410’s I’m sure.
410’s are great because the report and the recoil is minimal and followUps much easier to do.
Nice video! Good stuff!
Thanks!
Do the single action army gun in 9mm. I've thought about getting the Uberti patrone
I'd love to see Taurus come out with a double action only with no Hammer except an internal Hammer like the Smith
What is old is new again, The GX4 has many similarities of my gen4 Styer.
Did you tell them to get those TH10 10mm pistol out lol.
605 executive is purdy
Ive written Taurus off. Had a gun that didnt cycle correctly because the timing was off. Sent it in for warranty. Got it back as if they didnt do a dang thing. Spent 70 dollars on special shipping that they required, and it was just a big waste of money. The thing could kill the shooter with bad cycle timing. It's sitting in my drawer never to be used because i cant sell it in good conscious and my gunsmith wants more than I am willing to spend to fix it. Scrap metal at this point.
Good stuff, Gary. That 327 revolver is interesting, for sure. Ammo and brass will be a concern for that model, though, don/t you think??
Yes, unless the 327 Federal Magnum round takes off. Both Taurus and Ruger offer revolvers chambered in this round.
Love my 605 toro but the 407k red dot came with screws that were too long.
They should have released
a 7 shot 9mm revolver with a 3in non-ported revolver…
9mm out performs the 38spl , less recoil than a 357 mag
and has a unbelievable amount of self defense loads and bullet weights from 90grs to 150grs
Standard pressure, +P & +P+
Even hardcast offerings
9mm is much less expensive, which equals more practice
Well, they do already have the 905 Concealed Hammer, which is a 9mm revolver with a 3 inch barrel. It's only a 5-shot cylinder - not sure you could squeeze in 7 on that cylinder, you want plenty of steel between each chamber, especially given the pressures of 9mm. But, it's close to what you were wanting.
When are you guys gonna make an affordable lever action big bore?
Some really nice guns. Now if only they would sell parts so you can safely fully clean you pistols. If you do lose a part, the gun is a loss unless you sent it to Taurus for "repair."
I really dig the Defender 327mag With mirco red dot . I've been nothing but pleased with taurus and rossi. My 608 4in stainless was a tank of a 357mag.
You see a lot of 327 ammo on your local shelves? Ive literally never seen a box. Online it costs as much or more as 357 ammo. Why pay more for a weaker cartridge? One extra round?
Thanks for the video! 👍
You bet, thanks for watching!
I have the Taurus M66 6" barrrel .38 SPC/.357 Magnum, a Taurus PT111 Millennium G2 9mm., and a Rossi R92 in .38 SPC/.357 Magnum. The G2 can use the PT24/7 17 round magazines.
Love it
raging hunter 460 toro 10" with full rail, or full rail option for the 10"
raging hunter 460 / 500 home defender
Idc what anyone says im gonna rock a chrome pt92 with a white pearl handle till i die
Man I wonder if Taurus have gotten any better. I have owned about 10 different g2c and g3c with 7 of which being sent back to taurus and them sending me a completely different gun each time. The last one that I got was a g3c last year in november. Took er home, oiled her and cleaned out the factory grease. Brought it to the range next day and after firing a box of remington 9mm the gun no longer fired. Took the gun apart to find out why only to find that the firing pin broke in two pieces. Contacted good ol taurus to get it taken care of like last time. Still havent gotten that gun back and once I do I am going to sell it for 20 bucks like those guns are worth.
Well id definitely be more interested in the new stuff. Especially if i wasn't still waiting almost a year for the 2023 Raging hunter 500S&W. Which was ordered and paid in full for last April 2023 when i call they tell me there sending them out by the semi truck load. But no one seems to have them anywhere in the United States.
I hope they make that new 3 screw single action revolver in rimfire some day ..... I wonder if that deputy has a transfer bar or some kind of hammer block safety on it.
I can confirm that the Deputy does have a transfer bar safety.
7:40 The Judge Home Defender is impossible to find.
Is 'Flared mag well' the description you are looking for?
Hey Jorge…where the hell is the Raging Judge?! You guys need to bring that back
So in regards to that last judge.
Is it safe to fire that revolver with your support hand out in front of the cylinder?
I've always heard keep both hands behind that cylinder. Saw a video of someone holding a hot dog along side of the cylinder when firing. Ha, that's not where i want any of my body parts to be.
Love Taurus ♉🐂 , I currently own a poly Judge, G2C in 40sw and G3C in 9mm
I gotta get that Home Defender. I'm going to check the LGS to see if they have one or can get it. Street price is $600 to $700.
Good luck!
:23 He said "hard on" hehe 😁
My brother has judge, it's badass at 75y, don't need no optics
I had G2C POS , so I'm worried about the similar models
Had a 1911 officer, very good, and still have spectrum, excellent pocket pistol even with the worst trigger ever made...just got to learn the trigger......and I hit pop can at 40ft 7 of 7
The G2C makes me worry about buying a Taurus.......my brother nephew and work partner all got crappy G2C
Very nice
any news on the Raging Hunter 500 magnum for 2024, they sell out really fast.
Gx4 carry looks a lot like the p356 macro😂
I just bought a 605 revolver and am curious about the hole in the cylinder lock block. Most revolvers are solid when viewed from the side, but the Taurus when viewed from the side almost looks like a ring. Does anyone know why?
The home Defender instead of 410 should be 12 or 6 rounds it should be three😂
Is the 45lc sa revolver capable of firing Ruger only ammo.... Are they built like a tank ?
people give taurus crap alot but my g2c has had less failure to feeds than my 1911
I would like Taurus to come out with a mares leg lever action 38/357, 45 colt, 44 mag
I like em
Gx4 looks like a sig. looks good. I’m not a purveyor of polymer guns unfortunately. I admit it’s pretty snobby.
He called him "George"😅
As I explained to someone else, Jorge told me that he wanted his name pronounced that way. So keep laughing.
Outstanding vid,
i just wanna say PSA took a big dump on everyone . they are unmatched when it comes to price and value.
I own several Taurus firearms and happy with them all.... But.... What did Taurus cheap out on my Tracker .357 and Tracker .44 Magnum putting an orange sticker on the front sight?
That sticker didn't make it through a box of shells. Now the front sight is just useless black.
Yes I can upgrade the sight ($$$) or paint it .. But really? A sticker??
👍👍
When are they coming out with a 9mm version of the TX22!!!! 😡
Where is that 28 gauge judge???...
I got to the point that I didnt want to carry my G19 anymore...too big/heavy.....getting old sucks, and i do not recommend it!!
Anyway, I bought the G3C and was pretty well impressed with it. I can shoot it well, and it has performed flawlessly in the ~2500 rounds I put through it. I saw the GX4 and thought I'd give it a try and it is a very nice, well done pistol....BUT....I can NOT shoot it well. I tried everything to get it to where I needed to be and nothing worked. Sold it to a friend who LOVES IT!!! Back to the G3C and that is just fine as it does exactly what I want it to do, which is hits what I aim at and stays ON ME when I go out.
And THAT is the important part!!! I may see if there is a local range that has a GX4 Carry for me to try, and I am intrigued by it!!
I AM going to get that 327 in the 3" I think.
Thanks for the great vid and thanks to Taurus for their efforts to keep affordable, quality firearms in the hands of WE THE PEOPLE!!!
Thank you for the kind words, and for watching and commenting!
He should of talked about the G3C in 40
I would agree, but I'm sure they don't believe it will be a big seller.
@@GizzardGary why do you not think that it would be a good seller. I believe it’s there best seller in my opinion
"George" lol...
That's how he told me to pronounce his name, if that's what you are referring to.
@@GizzardGary Yah I figured. A lot of hispanics with that name just tells non-hispanic people they see their name is "George" because they know if they say the way it's really pronounced it will just get butchered. I just think it's kind of funny, lol.
I'm so tired of people saying 10 mL is only for Woods protection or bear defense it's the type of bullet that you run go look at a Nosler 135 grain or the xtp 155 grain or even the xtp 180 grain go with Underwood Buffalo Bore that's made for people defense not bears why do people not know what they're talking about in the gun community bear defense nonsense
Iam a big taurus fan I have muti guns
Dude hands is too shaky for me it makes me nervous letting him show me any firearms. 🤣