Це відео не доступне.
Перепрошуємо.
11pin Base, Explained
Вставка
- Опубліковано 17 сер 2024
- This video explains how an 11 pin base is wired and the different ways it can be wired.
We discuss the pin lay out and Normally open and Normally closed contacts and how they work.
If you have any questions please leave a comment or contact me at sparkyinstructor@gmail.com
I am a maintenance man at poultry plant and these videos are help to me. Thank You
I've been scouring youtube for different things (electrical) and by far the way you explain and show your method of wiring and explanations of why you may do one thing opposed to another is absolutely amazing!!!! thank you for helping me understand my job and I hope that you continue making these great videos!!!
I’m an electrician for 4 years and this would be my first year working on relays and motor controls. This video was very helpful. Thank you teach!!
Please help me.
How can I may a good electrician.
Please, I need your guidelines
You are a great instructors, great stuff ,watching from Papua new Guinea 🇵🇬
Thank you for all your videos. I'm going for my masters next month and I just found your channel trying to study everything and re review everything apprenticeship school covered. Thanks for you're videos sir keep them coming!
Thanks for making the videos! I think you do a great job explaining the subject thank!
Thank you! I’m trying to set up an ERV with 3 different switches (bathroom lights and kitchen hood) to active a booster fan with off delay. Neither my electrician nor my HVAC contractor knew what was needed. Your videos finally helped me piece it together.
I’m electrician and I want to learn more from you
I do maintenance for metal fabrication, working on Clearing 60t O.B.I punch press. Thank for the help!!
You are a lively lecturer I truly enjoyed the entire video
Bro pls keep on doing such helpful videos
You have what it takes to teach other learn the trade. You make it easy and simple.. great person and great instructor
Craig ! Thank you very much for the effort you do on this great videos , I hope God is going full filled your life with a lot a health, and blessing
Thanks Alot Bud. This will help me wire a 3 phase Motor with an 11 pin Relay now and also we're using timed delays too so I'm quite sure I needed this. You helped me more than you can ever know.
Thank you for this video, I really appreciate it
Awesome job, you are one hell of a teacher!
Thank you!! I truly appreciate the nice comment!! CM
Great video. This is an actual figure of the relay terminal plus the enclose instruction manual of the relay.
Excellent explanation...
Thanks big guy. Got sick and missed 2 classes... thanks for filling in the blanks.
Craig,you make things look simple. Thank you.
Hey buddy it's mutual, I'm super grateful that I just found you and I'm subscribed with the bell..... Thank you very much for your time and I hope you gain many more followers!
Sir.I'm Charlie from the Philippines.I watch your contents.Its very educational.could you please incorporate relay to other electrical components in a design wiring...thank you and GOD SPEED..
Im learning a lot from your video..please keep on going making more . I wish to hear from you to make video for 11 pin over under voltage r3lay hows work / explain. Thank
Thank you for the video!
I truly appreciate it a lot.
This is the first video I've seen of yours and it is one of many more to come I'm sure. I've been doing construction and maintenance for over 25 years but I always stayed away from electrical, until 4 years ago.
I am now autodidact in many things both AC and DC from cell phone repairs to 240v relays and most things in-between over the past four years. Electrical has been by far the best thing I've done to boost my experience and the most useful thing I could done to further my all around experience. It has even became my new favorite past time, I swear I'll keep wanting to learn about electrical till my last day. Thank you Sir, and great video, I look forward to many more from you.
Remember:
"Always think positive, it's a plus"!
Thanks for the videos!! I have gained a lot of knowledge that I can now apply at work!
Thumbs up and subscribed, live with an incredible engineer and it's hard to keep up without being able to take notes and your videos are awesome! Thank you so much for what you do, these videos are great!
Good job brother!!!!
Great instructions
Best explanation. Great job thank you
This is so good and helpful. Thank you 👍
Thank you Brother
Hi, I like your video. Thanks
Brilliant clear videos Craig. I'm learning a lot, very quickly. Have you made the video on time delay for motor control yet ? Regards.
Thank you for your positive comment. I have not as of yet but On and OFF delay videos are on the list! Thank you for the support. CM
very loud and clear video keep it up
I prefer the narrower 11 pin relay sockets. Saves room in crowded panels. For the last 25 years or so all of the relay sockets that I ordered had the very confident DIN Rail mounting. Back in the 1970's we had to drill & tap two holes for every re!at socket . Preferred the ice cube relays that have a little LED to let you know when coil is energized. Makes troubleshooting easier.
This video is very educational. I'm going to check out the 8 pin relay video
Great job at helping keep it simple.
Good explaination
Good eplanation for practical tips. Thanx a lot.
Keep up the good work Craig!
Thank you.
Helpful video ! Plz make a practical video tutorial on it...
Thanks mnr i like it so much🎉🎉🎉🎉
Thank you sir for this very good learning video .
Thank you for videos
Very well explained good job
You the man Craig!
Thank You Sir, this video helped me so much!!!
I need more ideas on the eleven pin relay
Thanks for this video
Keep smile in face when do the video...!!
I like a working explanation on VFD....
Possibly a FANUC robotic programming tutorial please
Aww mann’ again, Great. Really liked the logic that’s why they call it a logic diagram’ I see the logistics versus just remembering how to hook it up.. good teaching..
I would love for you to do a video based solely on removing dog legs.You guys mention them, but never have I once seen a tutorial on the proper way to remove one.Just try line the pipe straight.Well it doesn't always work out that way,and apprentices need this information so if,(and it will happen)they know exactly how to make the proper adjustments in a timely fashion.Thank you.
That is a great idea
I will put that on my list of things to video. Thank you for your suggestion!! CM
Awesome 🙌👌
Very clear explanation
Hey. video are great
7 and 5 becomes common when the coil are activated ?
I am now getting into motor control systems
Sir, thank you very much for your U TUBE Electrical installation for my future career. Can you explain how to wire or connect scone baker and mixer?
Can you wire up a relay according to prints. Step by step please.
Thanks!
Greatly 101 !
thanks for the chance my question is about the full explaination about the 8pin relays how they are wired
Thanks for easy explanation।
GREAT LOGIC TEACHING
Thank you help me a lot on my job thank s
Thanks for that wonderful knowledge
Good day
I have question
How test the relay if it’s good or bad ?
Thanks for your support .
Can you make a video about single phase motor foward reverse circuit, i'll really appreciated thanks
this is a very good video sir my name is NawabAli from Pakistan
sir is that common pin 6 how it works ...i watched the 8 pin relay video...very good teaching..love from india..sir
Please do video on motor thermister relays
I am working on a 12 terminal Inkbird IDT-E Timer Relay (The Wiring Diagram Sticker on it says IDT-E2RH) But the Silk Screened Label on the Housing says IDT-E. Terminal 5 on the wiring diagram is labeled "OV". But nowhere can I find what this means or a description of what this is for. Terminal 4 is labeled +12 VDC out for sensor use only. I'm not sure if I will end up using a sensor but I have to use both a Gate switch and a Reset switch. Could it be that the "OV" Terminal is where to connect the gate,Reset and Sensor Return wiring to and without those systems interfering with each other? Thanks for the videos.
Nice one..
Great teacher
What is referenced as A and B on an 11 pin timer relay AND an 11pin ice cube relay?
Is it me or are pins 5 and 7 labelled wrong? Every other video I’ve found has pin 5 NC and pin 7 NO, which appears to match the datasheet for the relay I have? Peter.
From South Africa thank you a lot 💙💜💚❤️🧡🇿🇦 l wish to know about contactors when using outside lights just basics thank you
Does the layout on 11 pins ever change?, Im on my 3rd month of my electrical technician course and just wired an 11 pin relay but in my case 1, 11, and 3 were commons with 1 connected with 4 and 5, 3 connected to 6 and 7, and 11 connected to 8 and 9.
EXCELLENT VIDEO
Hi bro. Could you do an instructional video for the installation of an 11 pin overvoltage undervoltage relay/comparator 3 phase.
Thank for sharing
Where do JM Electricians use pin relays?
I have seen them at the company in the stock room , but never seen where they are used. I assume in lighting circuits, but where else?
Absolutely understood you thxxx
Please sir,since 6 is common to 5 an d 7.Does it mean that this part of the relay is not operated by the coil?
I want to use a single 11 pin relay as a Automatic Transfer Switch,it is possible?
Hey good job.. can you make a video Hooking a transformer?
I'm trying to figure out the off delay relay alil better. Its pins 5 6 7 that confuse me and I kno how to use all other pins it's simple. I'm not understanding the gate and reset part of it .
Hello. Can 8 pin relays be used for forward and reverse motor control
I have a 11 pin phase monitor 400 volts but after connecting it indicates low voltage what could be wrong?
May I ask you some questions about this relay?
Good morning sir, what is the problem if 11 pin relay (BASE) is sparking it’s look like touching with L + N after sparking then the 6A fuse is trip
Good Morning Craig,
The following is what I need to do.
I have a chick egg incubator which has 2 separate circuits.
(1) 220v AC input which powers 220v AC heater and fan.
(2) 12v DC input which powers 12v DC heater and fan.
So the incubator can use either 220v AC Mains supply or 12v DC supply from a 12v battery.
Normally I run the incubator using the 220v but during one of numerous mains power outages I switch off the mains and switch on the 12v supply.
The problem in having to manually switch over from 220v to 12v .
Therefore I am looking for a automatic changeover that senses when the 220v goes off and switches it to the 12v supply and can then switch back to the 220v when the mains supply comes back on.
I am thinking to use an 11 pin DPDT relay (what coil voltage ?)
Can you kindly assist how to do this.
Thanks John
I will send you an email later in the day!! CM
@@craigmichaud-electricalins4602 Thank you
@@craigmichaud-electricalins4602 I have not yet received
Sorry I got really busy on Friday and this weekend is turning out to be the same!! I will sit down and see what we can come up with!! You should have something by Monday latest!! I have not forgotten about you!! CM
@@craigmichaud-electricalins4602
Thanks Craig
No Problem, I can wait.
A friend gave me a suggested diagram but I am failing to attach a copy here , can you send me an email address so that I can send it to you to examine.
Thanks
John
Thank you sir...
I want to know everything about bells and reallys sir
Thanks 😘
Great
👍🏼
Where's your video detailing the delay off timers?
I dont believe I posted one yet. Keep an eye out for one in the future. CM
@@craigmichaud-electricalins4602 thanks. Was troubleshooting a Dayton 6x602 11pin DPDT delay off timer when I found your channel. This video was helpful. All the others are in Hindi it seems.
we need poweful eng like your type in system
Hi craig do you have an email where i can contact you