I found usefulll to create the separe views from every state/floor: "Existing, demolished, and complete". So I dont have to changing everytime what I want to see.
Great tutorial. do you have a tutorial that shows how you would create different views that are then placed on sheets? I usually just duplicate the view and change the phase stings, I was just wondering if you would do it any differently. Thank YOu!
Very informative and detailed tutorial Sir Balkan. Sir can you make an in depth tutorial that shows the difference between using "Design Options" and "Phases". Many Thanks for the tireless teaching as usual about Revit. More Power & God Bless. I will wait for that topic... Thank You Sir Balkan...
Fantastic Tutorial! Thank you so much for sharing! Do you happen to have a video for alterative scopes phasing etc? For example: renovating a home and showing option a floor plan which is lower in budget and then option b floor plan that is higher in budget?
Hi I already posted this on another video, this seems more relevant - could you make a tutorial where you retro fit external insulation in Revit project phases, please? At this moment I build another wall (insulation and render layers only) next to the original wall but this seems like another "masking region" workaround. Replacement of sills and windows in retrofit project with external insulation is also a pain in the neck - at this moment I use cut-outs / opening in new added insulation "wall", so then I'm able to see the new phase window which is flush with and still embedded in the old wall. Please tell me there is better way.
What if we need to cut out a piece of roof or floor, for example beacause of adding new staircase? I cant find my way around it. Architecture openings dont seem to work in phases. If I do an opening it shows in all phases for some reason :/
Thanks a lot for your tutorials! Should you please explain how is it possible to have different options of design in the same project, including different options of demolition and new construction? Thank you!
Poštovani Miloš, trenutno radim veliki projekt renovacije postojeće zgrade od 10 spratova. U tvom filmu nedostaje prikaz pravljenja novog u postojećem podu. Mi primenjujemo metodu modeliranja poda iz delova, kako bi lakše prikazali u filterima da se određeni deo poda u novoj fazi ruši. Moje loše iskustvo je sa GM familijom (novi otvor u podu) iz razloga da u filteru za rušene delove ne prikazuje označenu površinu. Isti problem je sa GM familijom za zidove. U Novoj fazi - besprekorno pokazuje novi konstruktivni otvor u postojećem zidu, ali u fazi rušenja ne pokazuje naznačenu površinu zida. Filteri u mojoj firmi za rušene elemenata koriste crvenu boju. Puno uspeha u daljem radu. Ako je moguće da se danas čujemo, možda imaš rešenje za ovaj problem.
Poštovani, siguran sam da možemo naći rešenje za vaš problem, ali nam je potrebno malo više informacija i da vidimo projekat. Imamo Revit konsultacije u ponudi. Za više informacija, zamolio bih vas da me kontaktirate na sledeći mail: support@balkanarchitect.com
Great video as always. Splittimg the walls above the new floor so only a portion gets demolished will 'help me out a lot'. Is it possible to split an existing roof into parts in the same way, for example, you could have left the small hipped roof in place instead of the balcony? Last thing, please make a video on the other two tabs in phasing 'phase filters and graphic overides', they are quite confusing. Thanks a lot
Can you demonstrate what ceilings look like in this phasing process? I am seeing the change in what is shown, but in the Existing + demo view the ceiling does not show in dashed lines. It is not what I would like to see. I am not finding any ceiling demo topic in any of the videos at all. Thanks for you help.
Hi Balkan Architect, I faced a critical problem with properties which for some reason I lost it although I used PP and select the view tab and go to Modify menu but still I can’t see the properties. Please help me in this regard since I have an urgent thing to do. Appreciated of your always help
I would reset the UI and browser, follow these steps here from Autodesk; knowledge.autodesk.com/support/revit-products/troubleshooting/caas/sfdcarticles/sfdcarticles/Resetting-the-Autodesk-Revit-2014-user-interface.html
Hi Balkan Architect, I have some question with regards in phasing. What if there are 4 design options and let say in Option 1, I demolish some part in the building and in Option 2 the demolished part in Option 1 shows in Option 2 and in Option 3, the demolished part in Option 1 and 2 are shows in Option 3 and same with Option 4. Can we do that in Revit?
Really awesome tutorial. Though I wonder, coz I have worked on many phasing projects, and in all of them I had objects which had to be assigned to several phases. But most revit tutorials merely categorize the objects to existing new and demolished etc.. It doesn't really take the time line into consideration where overlap could happen...because one activity takes longer than the other. For example at week 1 I could be demolishing one side of a building, then at week 2 i could be starting excavations at another side but still demolishing is going on at the other part of week1at week 2. So this is why I'm asking how can I assign two phases like phase week 1and phase week 2 to one object area?is that possible with revit?have I missed something?
please help me. my lines are weird When i try to draw a line, i turns out green and I can't work with it in order to create a mass with a path .I can't select it when I'm in mass
As always great tutorial , nice representation with simple example
Great.
You are ahead of the curve.
I just recently began a renovation and this will me with the scope. I encourage others to support you on patreon.
very resourceful demonstration Mr Balkan, thank you so much.
I found usefulll to create the separe views from every state/floor: "Existing, demolished, and complete". So I dont have to changing everytime what I want to see.
Thank you man. I learned a lot from you.
I love your content. So helpful!
Super helpful. thank you!
Excellent idea
Great tutorial. do you have a tutorial that shows how you would create different views that are then placed on sheets? I usually just duplicate the view and change the phase stings, I was just wondering if you would do it any differently. Thank YOu!
Thank you Balkan Architect (another one)
it is very useful for me tnx dear Balkan Arch !
Very informative and detailed tutorial Sir Balkan. Sir can you make an in depth tutorial that shows the difference between using "Design Options" and "Phases". Many Thanks for the tireless teaching as usual about Revit. More Power & God Bless. I will wait for that topic... Thank You Sir Balkan...
Another useful video form BA :-) My next procedure.... How to cost estimate the demolition works!!!
Fantastic Tutorial! Thank you so much for sharing! Do you happen to have a video for alterative scopes phasing etc? For example: renovating a home and showing option a floor plan which is lower in budget and then option b floor plan that is higher in budget?
Found it so useful! Thanks
You are fantastic!!! thank you so much
Great As Usual
Thanks for chanel!
MERCI BEAUCOUP !!!
Hi I already posted this on another video, this seems more relevant - could you make a tutorial where you retro fit external insulation in Revit project phases, please? At this moment I build another wall (insulation and render layers only) next to the original wall but this seems like another "masking region" workaround. Replacement of sills and windows in retrofit project with external insulation is also a pain in the neck - at this moment I use cut-outs / opening in new added insulation "wall", so then I'm able to see the new phase window which is flush with and still embedded in the old wall. Please tell me there is better way.
is there any demolish function for the hole you opened in the deck for the stair?.. thanks for the great tutorial
What if we need to cut out a piece of roof or floor, for example beacause of adding new staircase? I cant find my way around it. Architecture openings dont seem to work in phases. If I do an opening it shows in all phases for some reason :/
Thanks a lot for your tutorials! Should you please explain how is it possible to have different options of design in the same project, including different options of demolition and new construction? Thank you!
you can do that in revit 2023
What is BOP of pipe and how to manage different BOP's of pipe for different water flows
can you tell me which video to follow for making modeling any furniture / other elements
I have a 4 part series where I make a parametric table here if that helps :)
ua-cam.com/video/mO-YYo3vB6c/v-deo.html
Poštovani Miloš, trenutno radim veliki projekt renovacije postojeće zgrade od 10 spratova. U tvom filmu nedostaje prikaz pravljenja novog u postojećem podu. Mi primenjujemo metodu modeliranja poda iz delova, kako bi lakše prikazali u filterima da se određeni deo poda u novoj fazi ruši. Moje loše iskustvo je sa GM familijom (novi otvor u podu) iz razloga da u filteru za rušene delove ne prikazuje označenu površinu. Isti problem je sa GM familijom za zidove. U Novoj fazi - besprekorno pokazuje novi konstruktivni otvor u postojećem zidu, ali u fazi rušenja ne pokazuje naznačenu površinu zida. Filteri u mojoj firmi za rušene elemenata koriste crvenu boju. Puno uspeha u daljem radu. Ako je moguće da se danas čujemo, možda imaš rešenje za ovaj problem.
Poštovani, siguran sam da možemo naći rešenje za vaš problem, ali nam je potrebno malo više informacija i da vidimo projekat.
Imamo Revit konsultacije u ponudi. Za više informacija, zamolio bih vas da me kontaktirate na sledeći mail: support@balkanarchitect.com
Great video as always. Splittimg the walls above the new floor so only a portion gets demolished will 'help me out a lot'. Is it possible to split an existing roof into parts in the same way, for example, you could have left the small hipped roof in place instead of the balcony? Last thing, please make a video on the other two tabs in phasing 'phase filters and graphic overides', they are quite confusing. Thanks a lot
Can you demonstrate what ceilings look like in this phasing process? I am seeing the change in what is shown, but in the Existing + demo view the ceiling does not show in dashed lines. It is not what I would like to see. I am not finding any ceiling demo topic in any of the videos at all. Thanks for you help.
how do you phase a wall opening in revit (not a window, not a door but an opening) I can not see new openings in the complete phase.
How would you add a demolition plan to a sheet set? It's the same view as existing and new, and you can't add multiple instances of the same view.
Excelent tutorial! how demolish one section of my architectural floor and add another sections in new construction?
good question, may be by drawing to seperate floors sticking each other, not a pro answer
Hi Balkan Architect, I faced a critical problem with properties which for some reason I lost it although I used PP and select the view tab and go to Modify menu but still I can’t see the properties. Please help me in this regard since I have an urgent thing to do. Appreciated of your always help
I would reset the UI and browser, follow these steps here from Autodesk;
knowledge.autodesk.com/support/revit-products/troubleshooting/caas/sfdcarticles/sfdcarticles/Resetting-the-Autodesk-Revit-2014-user-interface.html
Hi Balkan Architect, I have some question with regards in phasing. What if there are 4 design options and let say in Option 1, I demolish some part in the building and in Option 2 the demolished part in Option 1 shows in Option 2 and in Option 3, the demolished part in Option 1 and 2 are shows in Option 3 and same with Option 4. Can we do that in Revit?
What if I want to create a hole on the floor?
2:30
for me I just copy the whole floorplan and do those adjustment
Really awesome tutorial. Though I wonder, coz I have worked on many phasing projects, and in all of them I had objects which had to be assigned to several phases. But most revit tutorials merely categorize the objects to existing new and demolished etc.. It doesn't really take the time line into consideration where overlap could happen...because one activity takes longer than the other. For example at week 1 I could be demolishing one side of a building, then at week 2 i could be starting excavations at another side but still demolishing is going on at the other part of week1at week 2. So this is why I'm asking how can I assign two phases like phase week 1and phase week 2 to one object area?is that possible with revit?have I missed something?
navis works is best for u, if u can afford to learn and work on it
how do you find the model on pateron?
please help me.
my lines are weird
When i try to draw a line, i turns out green and I can't work with it in order to create a mass with a path .I can't select it when I'm in mass
Go to "drafting" and click on "lines"..You can choose from it any type you want
@@beautifulonyinye109 Thanks a lot !!
@@zakiklamson4409 Hope it helped you?
What’s your microphone name? My friend
Color? Like)