Smashed Samsung Galaxy A71 5G. CPU SWAP Step by Step for Data Recovery
Вставка
- Опубліковано 11 бер 2022
- If you need your data recovered, send me a message for a quote: www.vccboardrepairs.com/conta...
Here are some of the tools used in today’s video:
Use Promo Code “VCCBR” for 5% off your first order at WGP.com
🛒 Samsung A71 CPU SM7250 QS14 Stencil www.wholesalegadgetparts.com/...
🛒 Samsung UFS/Memory QS72 Stencil: www.wholesalegadgetparts.com/...
🛒 Mijing K23 Pro Board Holder: s.click.aliexpress.com/e/_AMn9cL
🛒 2UUL Flat Blade for CPU Tool: ebay.us/Tw2aUY
🛒 Polarizer Microscope Light: s.click.aliexpress.com/e/_AD76gP
This Samsung A71 5G (SM-A716U) came in for no power. After doing some visual inspection, I found the board was bent & there were broken components in that area.
Based on this, I decided that the motherboard was damaged beyond repair & it needed a CPU Transplant and UFS/eMMC Swap in order to recover the data.
This model is too new to support Chip Off Data Recovery because the data is encrypted by default.
So watch the video for the full process of repairing this Samsung for Data Recovery.
►Check out my new T-Shirts, Hoodies & more: merch.vccboardrepairs.com
►Amazon Storefront: www.amazon.com/shop/vccboardr...
►Join the new Facebook Group for Repair Techs vccboardrepairs.com/vcc-fb-group
►Let me teach you to Microsolder: vccboardrepairs.com/profixerr...
►Full list of Solder Tools: www.vccboardrepairs.com/gear
►Mail us your iPhone/iPad for repair: www.vccboardrepairs.com/conta...
🛒Buy The Seek Stand by VCC Board Repairs here: vccboardrepairs.com/buy-seek-...
📸Buy The Seek Compact Pro here: amzn.to/34I4whX
🕶 Buy Macro Lens here: www.vccboardrepairs.com/buy-m...
🚀Today's shirt can be purchased here: merch.vccboardrepairs.com/lis...
What repair or tool review would you like me to do next? Let me know in the comments below!
🛠Common Soldering Tools I use:
✫ Parco Microscope Complete Kit: amzn.to/3qXrGb0
✫ Hot Air Station Quick 861DW: www.injuredgadgets.com/quick-...
✫ Soldering Iron Station Hakko FM203: www.injuredgadgets.com/fm-203...
✫ Hakko BC1 Bevel Tip: www.injuredgadgets.com/hakko-...
✫ AOR Curved Reverse Tweezers: www.injuredgadgets.com/cerami...
✫Super Low Melt Solder Wire (138C): www.injuredgadgets.com/mechan...
✫ Kester 63/37 0.8mm Solder Wire (183C): amzn.to/365b7AA
✫ Genuine Amtech 559 Flux: www.injuredgadgets.com/catalo...
✫ Cleaning Wipe Towels:
www.injuredgadgets.com/catalo...
✫ Desoldering Wick Braid: amzn.to/3FU8ilf
✫ 99% Isopropyl Alcohol: amzn.to/3oOf1Yn
✫ Needle Drip Bottle: www.injuredgadgets.com/flux-b...
✫ Check out my Amazon Storefront: www.amazon.com/shop/vccboardr...
✫ And my site for more suggested tools: www.vccboardrepairs.com/gear
► Like us on Facebook: / vccboardrepairs
► Follow us on Instagram: / vcc_board_repairs
⚠ B2B & Wholesale pricing for mail in repairs is available for repair shops in the USA. Contact us for more information: www.vccboardrepairs.com/conta...
Please note: This page contains affiliate links. If you choose to make a purchase after clicking a link, I may receive a commission at no additional cost to you. Thank you for your support!
This is so awesome to see. Nice work! 👍
Thank you! Appreciate your support
@@VCCBoardRepairs haha, two idols in one video
Thank you so much
I’m so proud of you brother your killing it 💪. This one had me on the edge of my seat. When I saw the Samsung logo and full boot I yelled LETS GO!!!
Haha awesome man! It was very exciting stuff!
Good job jesse, the smile on your face is unbeatable!
Thank you! It was a great feeling
Watched the entire video, and wow!!! Super job mate!
⭐️⭐️⭐️⭐️⭐️
Thank you so much! Cheers!
Nice job Jesse , really did enjoy this one. Watched the whole video. So glad it was a success. Love your cpu videos and streams. Thanks 👍👍
Awesome thank you!
Very good job and thanks a lot for the detailed explanations ! Have a nice Sunday rest !
Many thanks!
THIS IS EXACTLY WHAT I'VE BEEN LOOKING FOR!! Usually I never find exactly what I'm looking for.
Fantastic!
Nice work man👌
Appreciate it! 🙌
Congratulations Awesome 👍
Thank you!
Very good... Job ... Greetings from Portugal 🇵🇹 🌟
Thank you! Cheers!
Keep up the good work🔥🔥🔥🔥 We are still waiting for the infiray T2S plus thermal camera video. Thanks in advance
Great! Thank you!
I'm definitely going to order that soon
Nice job brother💯🤘🤘
Appreciate it! 🙌
Your work is amazing! I wanted to ask because I think I'm blind and can't find it on your tools list. That little vice you use to hold your boards, what is it? Looks much better than mine :p
All the best!
I use the Mijing K23 Pro. You can find it here: s.click.aliexpress.com/e/_AMn9cL
That’s awesome work man im also mobile technician from nepal
Thank you!
Hey Jesse, I enjoy the videos. Just curious. Have you ever tried using a small amount of acetone to remove the underfill either on the board or the chip? I know acetone is a bit more aggressive of a solvent than isopropyl. But I wonder if it would break down the epoxy/polymer without damaging the pads if applied correctly. It might not be a good idea for the board since you might dissolve some plastics or silkscreening, but it might be safe for the fill that remains on the chip itself.
Great questions. I've never tried it before so who knows.
Although i've never heard of anyone else using acetone for this, so maybe that's for a reason.
@@VCCBoardRepairs Maybe take the chip from the donor board and try with a few drops plus some low heat. You know, for science.😅 As long as the acetone doesn't break down whatever is between the pads on the chip face. Not sure if that material is masking or silicon. I would test right now but I don't have any acetone on hand.
Sick!!!
Thank you ☺
WOW!!!! just WOW
Thank you!
I'm a new subscriber from South africa, nice job it gives us the courage also to try these jobs.What will a job like this cost in your country?
That's great.
This specific job was B2B so I can't say the pricing for this job
But in general, Data Recovery price can range between $500-$1500 depending on the device model & the issues.
Enjoyed and learned... greetings from 🇮🇳 🇮🇳 🇮🇳 🙏🙏
Glad you enjoyed it!
when i start my own bussiness one day! I`m gonna have your photo hang on mye wall =) realy amazing what you do !
I would honored! haha
Very good 👍 video!!! Tell me please... Is it possible to replace cpu without memory or memory without cpu? I have a71 with shorted cpu. Thank you for answer.
Just for repair? I am not sure.
Nice job. Samsung look a lot easier than iPhone. Being that you had to purchase another phone, this cant have been a cheap job. Well done Jesse - keep the videos coming.
Thank you! Actually, Samsung phones are pretty cheap to buy used/frp locked/blacklisted. I spent about $95 for it.
@@VCCBoardRepairs I got water damaged a50 Samsung any chance
Mind boggling bro
haha yes.
only ram was ok, but was a good tutorial for cpu replacement as well! great work :)
Thank you!! 🙏
Yes I did
Could I send you some images of my samsung board to get an opinion of whether its worth the attempt or if you have any other suggestions to recover the data. I had a very similar situation happen where the screen was damaged and originally thought it was the battery preventing it turning on but after swapping the motherboard with one on a new phone it didn't power up. I had backed my data up using the rule of 3 but all 3 were lost within a week.
Sure! Send me a message for a quote request: www.vccboardrepairs.com/contact-us
big fan ❤️
Happy to hear that 🙌
would it have been less work if the board has a testpoint for the emmc and read it with Easy jtag or is the memory locked to the cpu?
Yes it's paired, and eMMC is encrypted
So you can't do Chip Off
Nice, Nice
Thank you!
My brother drop in water his Pocophone f1 and he's desperate to recover his data, this procedure can be done is his phone?
We can certainly take a look at the phone & attempt to recover his data. Send me a message directly: www.vccboardrepairs.com/contact-us
Sir did you programme the nand
No I didn't
1:38:52 was legit a nailbiter moment
Haha yeah that was a bit tricky.
I have a Samsung galaxy a 70 phone with a damaged motherboard, on which I have a lot of data.. I wonder why the processor also needs to be replaced?
Not enough the memory IC?
the Memory and the CPU are paired. you cannot just swap the memory. the device will not boot.
@@VCCBoardRepairs Thanks for letting me know! Then both have to be replaced.. I just have to get a motherboard somewhere..
I have an s21 with a cracked cpu, The customer wants data. The cpu and the nand are paired and all hope is lost right? I was hoping I could just throw on another cpu .. I don't believe that would work though.
Data is gone unfortunately
CPU and UFS are paired for data
Luv form india 🇮🇳
Thank you, from Las Vegas NV
ban oi sip cho minh mat cai vi lam chan sam sung dc ko b
Thank you for watching!
my moutherboard is dead , can a save my data ??? 😭😭😭😭😭😭😭
Yes maybe. Depends on the issue. If you're located in the USA. contact me for a quote: www.vccboardrepairs.com/contact-us
Why don't your solder balls solder to the stencil? Mine always do
I'm not sure why yours would do that
noce jod but the nuddle not for cpu u must use biggest nuddle
sorry bro, i will use different nuddle next time
sooo long video😇
Yes! This is a full step by step video of a CPU swap
@@VCCBoardRepairs okey Thank You Verry Much!❤
Love From Bangladesh 🇧🇩
U did a lot of mistakes Jesse , luckily it work
What kind of mistakes were made? Would love to hear them.
@@VCCBoardRepairs
First u were nervous 😬
Second is the air direction from the nozzle
Third add little tiny amount of flux after u remove the glue around the cpu , once starts bubbling that’s when u insert the blade very gently and go in circles to left it up
Cleaning glue of the cpu there’s way easier methods than Ben bee method don’t just copy and paste
Also for cleaning the glue on board to prepare it
After reballing u don’t use 400 to solder back , it was all about ur air direction
That type of cpu is easy as iPhone 7 baseband
If it’s iPhone or double layer cpu , trust me u r fucked & don’t forget there’s people following u and if they tried exactly what u did they might don’t have same luck as u do , it will end up as a mess
Man, I just sat here through your entire video. So much knowledge. This exactly what I need, took it ubreakifix but they won’t get this deep. Need my pictures of my grandparents back. Since they passed away. It’s killing me thinking I lost those pics.
Glad to hear you enjoyed the video. I can definitely help you with that
Send me a message: www.vccboardrepairs.com/contact-us