Sundown X-12s V.3 on Salt 4K (CHECK OUT MY RECENT VIDS FOR UDPATED VIDS AND MODS)
Вставка
- Опубліковано 23 сер 2024
- 3/31/23 UPDATE🔥: Jump to my latest vid here👀💪🏾🔥: • 🔥🔥Sundown still Pounds...
1/10/2022 UPDATE: bracing complete. check new demo here and see 👀 the difference 🔊🙉 • Sundown X-12s V.3 on S...
1/2/2022 Update: thanks for the comments and views. Im gonna work on bracing the box but the problem is since the the port was built on the bottom theres no way to secure the brace by simple drilling from top and bottom of box. Imma have remove both subs and acrylic and figure a way to drill the brace from inside as well. suggestions are helpful. stay tuned for more flex vids
Running Mechman 240A with XS Power 3400 in front and Cyber 6K in back. All 1/0 Guage with Big 3. 2 Sundown X-12 v.3 wired to 1-Ohm in ported box about 4.3 CF tuned to 32Hz on one Sundown SALT 4K. So far I clamped a max of 1850 Watts with burps between 27-33 Hz. Lowest voltage drops of about 12.0 V while engine running. Has more power to give with some more tweaks. Stay tuned
Upvote on reddit www.reddit.com...
Equipment:
- Sundown Audio X-12 V.3 Subs
- Sundown Audio Salt 4K Amp
- Limitless Limithium Cyber 6K battery (rear)
- XS Power AGM 3400 battery (under hood)
- Mechman 240A high output alternator
- All wires 1/0 GA OFC with Big-3
- SMD Analog volt meter for main AGM batt
- Sundown volt meter for Lithium batt
- NVX 500A dual batt isolator
- All ceramic ANL fuses: 250A alt to main batt, 300A main batt to isolator, 300A isolator to lithium, (2) 200A lithium to amp,
Box specs:
- 3/4" Birch with double baffle and steel rod center brace and a 3/4" Acrylic window
- Height 14.5", Width 39", Depth 23"
- Port 32"x2" tuned to 32Hz
Amp settings/tuning:
- Gain (multi-meter method) set to 63.25V before distortion
- Low pass lowest setting 35Hz
- Subsonic 24Hz
- Bassboost off
i dont own rights to the music
Looks amazing but the box is flexing a lot and its slowly damaging and will break the subwoofers. Add another baffle
That's what I was noticing 😬😪
What is a baffle ?
@@jaydenedgar4393 The panel of the box where the speaker mounts to is the baffle. Since that panel has big weakened by cutting a hole for the speaker it is best to double the thickness of wood to add strength. Doing so will strengthen the box resulting in better sound output and also prevent the baffle from flexing and potentially breaking the basket if the speaker.
Ya at least a double baffle flush mounted
Good looking setup 👌
Brace that box up bro you won’t be mad but clean set up 🦾🦾
Yeh hes losing a lot of db
Thats what i was thinking... like damn single layer baffle flexing.. so much money on everything else
Yes, nice system, but that box needs both bracing and a baffle. Single layer isn't enough for that much power
If you face the port of your box back and put 1 more ply of wood on top or put internal bracing in your box you will get way louder💯
Impressive system. Those Sundown subs are like pistons..
Yeah they need reconed every month just like Pistons need replaced on dirt bikes
in fact.. almost every sub is indeed a piston
@@superior3384 ya I want the new American bass Xmas over any thing or Orion HCCa
@@superior3384 Soundown!
@@nickolasvaughn667 You must be a skarbage fan boy. Can't afford the real shit.
Brace your box and reinforce it and you will have one hell of a nice little system and maybe add another battery or a cap bank to help boost your voltage up some...
sick setup... box almost tearing itself apart though
Dammm
why does that box not have any braces?! id get a refund immediately
@@viivcreations9161 idk but this video made me go get mines… SunDown Audio x-12, now I’m on the hunt for an amp “SALT 4k” and an alternator “MechMan 350a” and the whole nine, electrical upgrades to power the setup “limitless lithium battery” dammmn this thing is getting expensive
Some really great equipment! I'm not sure it would be beneficial to brace the box you have vs building something larger and more stable for those subs though. That box looks legit for a less powerful setup but perhaps too small for the pressure these behemoths create. Even sundown recommends 5 CF box and thats just a starting point.....
I'm only finding box specs that recs 2.5 cu ft, it's on down4sound and sundown too
@@lord_kappa_pb1825 Correct, there are 2 subs. 2.5 per sub makes 5.
@@chunkiehunk5201 oh, right right. Yeah that makes more sense now
Well maybe space was a factor, or maybe he likes the way That enclosure performs in That particular vehicle 🤔 👍
Love your setup....brace up your box before it breaks💯🤝🏼
ua-cam.com/video/_TGUkClP__w/v-deo.html
What song?
You should brace that box asap.... I see some bad things happening to them subs .. nice setup id hate to see a motor fall off one of them subs..
this is basically what i was gonna have as my setup till i totaled my sentra. now i got a pilot and im going straight to 2 x-18 v3s
I swear this is my favorite bass vid rght now… I gotta say #fav_violent_bass_vid Lol 😂 and no car windows were destroyed in this demo… #perfect
Nice setup but HOLY FUCK that box flex needs fixed ASAP that's a disaster waiting to happen.
Never seen so extreme baffle flex before 👁👄👁 (not hating or anything, it looks clean af!😍)
Nice system 👍🏾 very clean . Them subs are beating hella hard!👊🏾
Your baffle is flexing so much you can see the motor moving. Good thing sundown baskets are as strong as they are.
Shits banging tho
Killer set up . Might need to brace tge center of box between subs ! In the video it looks like the box is flexin a bit. Might be camera tho. Id love this set up for myself !
I would get a bigger box. That box it way too small for those subs. Plus it would Hit so much harder. Other than that great set up man.
Yep. That box is not even big enough for just one of those subs. That box is wayyy too small.
Super Clean Setup 👌🏾 Great Job on Everything ...Keep Slapping
the whole car became the passive radiator
😂😂🤣🤣
That box is dying a slow and painful yet magnificent death 😆
Acrylic gives the impression motors are moving lol
For the new viewers his box is now braced ❗️check out new videos
Them subs about to brake that box 😲
lol Gat Damn! Look at them Xv3's Dancin' in that box!!!!!!!!!
Crazy, your box is flexing
boxed fixed...check new vids
Damn! They hit so hard it almost fixed the dent in your door.
That box is bout to eat itself
Lol yeah i had this customed made more for looks. I know sound is supposed to be heard not seen but coming in at 4.3 cubes with the 3/4" acrylic it still hits pretty hard. My next box is gonna be strictly high output...all birch maybe 6 cubes, triple baffle and reinforced like fort knox 💪🏾🔊🙉
Thats Beast Sounds Good 💯🫡
Holy box flex batman.. you need bracing in there or that box will come apart
Brace that enclosure before you break the baskets in half on those subs.
man that setup is so clean
That box needs bracing bad!!!!!!! Other than that dope set up 🤘🏾🤘🏾🤘🏾
Bracing in progress....thanks bro 🤙🏾
It looked like woofers are moving around but slamming.👍👍
Bro you can brace it to the port, just get a 1in wooden dowel from hardware store and measure from face to port then inside the port to exterior wall and brace the port and then brace the face to the port and it will be solid and good to go!
yeah i looked at it and imma have to use threaded rods with a threaded plate on top of the port from inside the box to secure that end....vs dowels i can screw it securely from top of baffle but the bottom of the dowel will be on top of the port and i cant fit a screw driver inside to screw it down and plus the port has a middle brace already also.
Damn 👀👀👀👀👀 that box ain't hold itself 😂😂😂😂
That box needs some good bracing
Coming soon
Holy shit they're flexing the whole box lol
And that's crazy it's flexing the box and the subs are moving sideways that's some power and the voltage is dropping with 2 xs power batteries dam
That box flex is serious
fixed...check new vids
You need some bracing asap you can see the motors rocking back and forth on those it won't take long before a basket breaks! It'll make it louder to brace it also
yeah imma work on it...the builder made a double baffle but yes still indeed flex when at full tilt.
@@808Scenes I'd pull the subs out, and drop in some dowel from top to bottom bracing the middle of the baffle it will help a lot. Even a 2x4 cut to length would work wonders
Damn very nice
Those boys where getting extremely LOW!!
Brace the itll help alotttttt but either way awesome set up
Bracing coming soon 👍🏾
Turn the box around so the port wil face the rear with the box bout 3inches from the tailgate them lows will sound way louder.....ive did 3 builds on your same vehicle....
Shit getn dwn My-G and it's a clean setup, liked and sub'ed 👍🏾👍🏾💥💥
Very nice and very clean setup, but you desperately need a double baffle and a center brace a.s.a.p!
The box flex looks amazing! Thx. Scot M.
Yeah but looset a lot of db
@@late221 duh
love the set up thats a lot of box flex my box use to flex like that and did not even last started to get separation
Needs a pole in the box got some baffle flex that’s gonna be trouble someday
Beautiful set-up but you should really add a brace inside the box and or add another baffle layer to the box. Those subs are flexing the baffle like crazy you are losing output and will damage subs like snapping the spokes in the baskets.
very nice, cant wait to check out new box build
Haha! That box is bout to lose it ! That’s awesome man you would really gain a lot from another baffle or just a all new stronger box. That song does tear shit up though.
Nice setup man! I run an scv4k on a couple American Bass HD12s. Love it! Almost bought the Xs instead. Curious to hear them in person. Got the 2 HDs for about the same price as one X. So it was an easy choice at the time when I was down on cash.
Yea xs run you more money, unless you find used ones. I have 4 sundown x12 v2 and they smash lows, it just doesn’t seem like the sub is working that hard to get low
How u like the hd’s?
@@mikessplboxes7497 they’ve been great! And I’m picky. I Prefer powerful lows and they deliver, but they aren’t one note wonders either. I’ve had a couple neighbors kindly suggest I turn it down to stop shaking the pictures on their walls when I go by lol. And their windows. 🤷♂️
@@mikessplboxes7497 had a guy 4 cars ahead of me stop me at the next light to ask what I have too. His jaw dropped when I said two 12s lol. And it’s winter here in Michigan, can’t roll the windows down very far. I’ve kept them the longest of any sub so far over the last 10 years. Box is made by Cherryman Customs out of Tennessee. That’s the most important part and he’s a genius. Sound modeled, double baffle (or more if needed), flush mount, 45ed, pocket joints, the whole 9. About $450 shipped by freight for two 12s ported with MDF. He works with plexi also. Wood terminal cups built in, brass bolts and nuts to finish it off. But those are up to you to acquire. Probably more than you wanted to know, but it always impresses anyone who hears it.
What batteries do you have on your setup?
put some bracing in that box, damn. them subs are dancing. great install though.
Thats the Boogie down boom box !! That sucker is slamming so low _ its almost underground man !!
That box is flexing hard to but those x's is getting down 👍
🤙🏾...additional bracing in the works 🔊🙉
Not bad. Definitely gonna be needing a new box like ASAP
Box is nice, but can't handle them bad boys. I just ordered 2 of the Xv3 12's 💪
Set up is very detailed great with information in description
Gah damn that box looking like she hanging on for dear life !
That's a sick setup you got bro! How much all that cost you overall?
I bet, when you pull up to the red lights they close their windows hoping it'll help. 😁
So so nice box ❤️ love my G this is passion 💎 my guy
Yeah it came out nicer than i thought....i saw a similar one online but a local builder built this to my specs and came it out better for a fraction of the online one. 💪🏾
Very nice setup!
That subwoofers are looking wavy. Looks like they aren’t even screwed in tight. Nice setup though
yeah its tight...used machine bolts and nuts also applied threadlock. working on a center brace
@@808Scenes not only center brace but double baffle and a bigger box man
@@errolsmith5634 nah this box was designed for this application....later down the road im building a completely bigger box strictly for performance. This is one just a "show" box and it still hits pretty hard.
I just sold my 2 12xv2s 😞 new in box
Zv6 is what i am going for
what amp would you recommend to use if I only wanna run one of these subs? I’m trying to save a bit of money and what gauge wire? Any help would be appreciated!
Triple up the baffle..if it's already double add 2 more and computer sink the subs. My 2 cents on trying to secure without a brace
I decided on adding internal bracing soon. The box is at its max height for my application, cannot add another baffle.
A better stronger box would make difference and sound better. The box shouldn't be flexing
Woah the subs are moving in the box.
Nice setup simple n clean
Definitely need box built for those subs it gonna blow apart! Every thing looks really clean tho. You need a 10cube box for those monsters.
Yeah...check new vid box fixed. This box was mainly for looks as i had a max dimension to work with for this application. For what its worth she still slams and tearing the car apart 💪🏾. New box coming soon strictly for performance about 6-8 cubes 🔊🙉
Damn could use a couple braces inside there. Hope your baskets hold up.
Check new vid, one did the trick 🔊🙉
slapp'n!
I like the box style smart build that 👌🏻 I’d really think about getting a thicker built box and some good bracing mite damage the subs with that much flex 😂 like I said still a smart build 👍🏻
Loving it
Is that a sealed box?? If so I’d faced them subs to the back. You’ll need dynomat but it’ll be louder from my experience. But if it is sealed, those subs were designed to be in a ported box if I’m not mistaken. Non the less I love the system. It’s solid 👍🏽
Edit: I just seen at the end the the box would sit up high if you faced them to the back. Leave it as is. Next box I’d get a port and sub rear firing. It’s be louder.
Edit2: I see the port now lol. Like others have said. Get rid of that box flex and face the port to the back. Money!!
ported....the port is on the bottom
Definitely #money 💯
u got quite the baffle flex there, u need to add some bracing inside ur box before u might break ur subwoofer baskets
already fixed...check new vids
Song nameee
@@808Scenes good shit looks way better in that new video with bracing
Brooo brace that box broke 2 baskets from baffle flex but system looks good man
Those need a bigger enclosure bub, sick af though! 🔥
Yeah i know....bigger enclosure soon...going for 6-8 cubes later 💪🏾💪🏾💪🏾
Lmao @RyanBassForLife is absolutely correct. Any box that’s built for 2 zv5s must absolutely have cross branding, oh and hes also correct if you did add another ply, personally I’d go all the way around, it should be 2 boards all sides and 3 for top, and add bracing, and turned the box around, so it actually has a loading wall, you will most certainly gain id assume 5-7db at least. At this point I’d also sound deaden everything, and put some bracing poles in the car, as well as put deaden and insulation in the back so the hatch doesn’t flex as much either. Remember the less the vehicle is able to flex, the louder you’ll be
Wicked setup but that box needs a brace in between those woofers. Also add some sound proofing to the roof and some other parts of the car.
First. Awesome build man. Very clean. I like it. But that box is WAAAAY too weak for those subs. Either the box is gonna snap, or your subs are gonna bust a basket. Badass subs tho man.
Needs a new box with 1/2 MDF and double layer on top + bracing inside. Looks way too small as well, my 10s box is bigger at that with 1000 RMS each.
Need some power on mids and highs. How can you hear anything besides bass and rattling? Definitely needs some insulation and a brace bar for ceiling
Those subs look like they need blood to operate properly and they seem hungry.
Very nice setup!
Love those lows man sweet
Hey bro if you don’t mind me asking, how thick of a piece of plexiglass/ Lexan did you use there? It was taking a beating and holding up good. Does it rattle at all? Thanks ahead!!
3/4" Acrylic same as the birch... 3/4" all around. Box glued and screwed. The acrylic was originally screwed and sealed with silicone but i removed it and instead of silicone i used a trimed sheet of cork to seal it. Makes for easy removal also. So far so good no rattle from box or acrylic. 💪🏾
Wow that box flex lol
What up Fam new friend to the channel. Your audio system is nice!!!!!!!!
Never seen 🤯😍a system like this i love it cool 👌
holy baffle flex, brace that box before you break a basket.
Yup...box fixed. Check out the recent vids 🔊🙉
@@808Scenes hell yeah man, killer setup still.
I have 3 favorite subwoofer brands first is sundown, second is tt technology, and third is ground zero
Looking at your amp gain is is barley up or is that just past half?
What set do you have is sick bro
I’m probably going to get the same set up, I have to ask how much was all of this Jw
Well pretty much everything except for the box was bought online from down4soundshop.com. You can see the retail prices on there. Its been almost 2yrs so the prices prolly dropped now and plus i had to pay shipping each time because of Hawaii. Cant remember total over time but im sure it was over $5k after everything said and done. I mean your looking at $3700 already just for the subs($750ea), amp($1400), and lithium battery($800). And dont forget the priceless labor of doing everything myself 😁
Why is your voltage dropping so low? You have something wired wrong. Probably not grounded well. Plus brace the box. After that put your system back on UA-cam. It'll be very impressive.
Nothing's wired wrong. I have 0Ga. OFC throughout including big 3. Subs connect at 1 Ohm load. Lithium battery has 4 grounding points with 0Ga OFC to chasis thats been strip completely of paint with solid bolts and ring terminals. Amp has 2 runs of 0Ga OFC for power and ground directly to Lithium with less than 3ft length. This song is a bass boosted song between 20-40hz and im going full tilt for this demo. Voltage drop is expected at this level. As a daily with normal songs at 80% volume i always stay in the high 13s voltage. Thanks for the comment 👍🏾🔊🙉 Box has been fixed...check new vid 🤙🏾
that baffle flex needs fixing badly
Yay a Jeep Liberty now .ima tell my mom she need bass I do not wanna save my allowance
How do them Xs like the Salt 4?? Would a Salt 6 be too much for em?? I dig the build man!
They loving it...can take way more power. I need a bigger box or bigger amp actually. Because of impedance rise im not even getting the full 4k from the amp. A Salt 6 would be perfect. Imma tweak it some more to get as least above 2500 watts
@@808Scenes, Great job. One question? Are you using an isolator between the XS AGM Battery & The Limitless?
@@62dobie yes...i have a 500a NVX isolator