Thank you for sharing. I had the same issue and this helped me resolve it. I have one more suggestion, I have used Loctite 222 (mild version) when tightening the two screws on the side to prevent them from coming loose. It seems to be working fine as of now.
Using two good spring washers along with the orginal washers that was shown it will not become loose. I had a NX Scorpion .22 in 2014 which also used to have the problem with the 2 side screws getting loose very often and affecting accuracy
The best explanation I have ever seen in UA-cam upto date till now....had a same problem thanks to you that I am able to fix it properly now. Love your voice and the background music... Keep growing lots of love from NAGALAND
Even with tightening the small allen key screw it did not hold for long. You could also make a small dent on the big screw where the tiny screw can get a hold of when tightened.
Love the way you are explaining, however i am not facing any problem in my rifle at present but still i watched full video…love your voice and background music.
It will get loosen after 30 to 40 shots sometime if it is tighten properly it last around 80 to 90 shots. That's very irritating to remove the stock and fix it always, Precihole need to come out with better solution.
Then the only solution is to drill the main screw side wise and then tighten the small screw so that the small screw will slip halfway inside the main screw and never let it rotate again, i finally did this and the result is permanent
One can try thread locking glue,this will hold the bolt and stop it from rotating...those glue can be purchased from bike spare parts shop named as gasket glue.
Hi, i bought NX200 without scope. But now I need a scope. Can you tell me what scope you are using on this rifle, where can I buy it and how far can you see target clearly?
Is ka best solution Mene kiya he.dril machine SE nut par 6 chote chote hole karwaye he lathe machine par.ye chota Allen screw us par atak jata he aur loose nahi hata he.this is biggest mistake of precihole gun.daina ke models me hole hote he nut par
Sir If u give tide also the screw will come out again an again an can't even shoot hall day yarr but sir i know how to stay the screw for parmenent but I can't explain from here 😢😅
Bro. Very much helpful I'll keep it at mind, well can u tell me about its accuracy with scope? How long its zero remains and would mounting a scope with it is long last or brake the scope. Kindly respond
Accuracy is 100% totally depends on how accurately you zero the scope, a small problem which i face is the pellet grain, bcz every pellet has different grain and currently my scope is zero for 7-8grains pellet, if i shoot bigger grain pellet then i have to zero the scope again. 2) My mounting has double screw with a stop pin which prevents the scope for moving, it helps the scope to maintain its zero. 3) Yes my scope showed an issue after back to back shooting, the issue was with the spring inside which got misplaced, i fixed it easily. I found this scope pretty good bcz of its price.
Bhai mare bhi New nx 200 hai starting mai hole Dekha to mujhe lga halka Brown tha lga rust lga ho bhai maine oil daladiya kuch hoga bhi bhai oil dailne se bataye plz bhai plz rust bhi laga hai S ayad Brown hai plz batao
Indian made k haar Rifles mai kuch na kuch long terms mai problems rehta hih hai, Hosake toh thora budget bara kr foreign made lena faida rehta hai khud k lye
8879320376 ye precihole walo ka contact number hai iss number pe whatsapp kro apna bill aur problem likh dena, wo call krke apko screw bhej denge. Maine bhi mangwaya tha extra
There is an option to adjust your aim, rotate the top elevation turret of your scope clock wise to move your aim up.. 1 click is usually equals to 0.1mil
I use scope for its look only, baaki mera scope toh abhi tak acha chal raha hai bas zero krna padta hai kabhi kabhi (not so frequently), log bolte hai acha mount use krne se wo problem bhi nhi hoti bt i feel zero ki problem tb bhi aati hogi kyuki ye mera 2nd mount hai. Scope ke sath rifle beast lagti hai no doubt.
Thank you for sharing. I had the same issue and this helped me resolve it.
I have one more suggestion, I have used Loctite 222 (mild version) when tightening the two screws on the side to prevent them from coming loose.
It seems to be working fine as of now.
Using two good spring washers along with the orginal washers that was shown it will not become loose. I had a NX Scorpion .22 in 2014 which also used to have the problem with the 2 side screws getting loose very often and affecting accuracy
The best explanation I have ever seen in UA-cam upto date till now....had a same problem thanks to you that I am able to fix it properly now.
Love your voice and the background music... Keep growing lots of love from NAGALAND
Even with tightening the small allen key screw it did not hold for long. You could also make a small dent on the big screw where the tiny screw can get a hold of when tightened.
Yes this idea is perfect....this will never make the bigger screw to come out,it will be locked in its place.
Love the way you are explaining, however i am not facing any problem in my rifle at present but still i watched full video…love your voice and background music.
My pleasure. Thnx
It was good, even it's ur 1st video. One suggestion voice is very low try to increase it.. All the best dude. 👍
Do not tighten the L rench too tight,if the internal Rench holder slips then you will never able to open the screw again.
It will get loosen after 30 to 40 shots sometime if it is tighten properly it last around 80 to 90 shots. That's very irritating to remove the stock and fix it always, Precihole need to come out with better solution.
Then the only solution is to drill the main screw side wise and then tighten the small screw so that the small screw will slip halfway inside the main screw and never let it rotate again, i finally did this and the result is permanent
Absolutely
One can try thread locking glue,this will hold the bolt and stop it from rotating...those glue can be purchased from bike spare parts shop named as gasket glue.
Bhai small screw tight hone ke baad bhi main screw loose hoti hai kya?
Nx200 scope ka sath accha hoga na , Bina scope ka ?
Nice first video..
Abhi kaisi chal Rahi hai nx200?
Screw problem again?
Achi chal rahi hai
NX200 is good air gun good pressure price 13k only.
Ab 15k ki ho gaai hai bhai
@@hashirkhan565012 k ki laya me 17 date ko
Bhai tumne scope kha se liya aur kis company ka hai aur model kaun sa hai ?
Bushnell 3-9x40, kisi known se liya tha.
Hi, i bought NX200 without scope. But now I need a scope. Can you tell me what scope you are using on this rifle, where can I buy it and how far can you see target clearly?
As far as we can see clearly with the scope this rifle shoots at aim, i bought from somewhere in punjab but unfortunately they don’t sell it anymore
Bhai mera wala gun ka goli uper nai lag pa rha hai
Is ka best solution Mene kiya he.dril machine SE nut par 6 chote chote hole karwaye he lathe machine par.ye chota Allen screw us par atak jata he aur loose nahi hata he.this is biggest mistake of precihole gun.daina ke models me hole hote he nut par
I have done the same few days back, i will post a video on that very soon
@@imperialimprints is matter par abi tak video nahi bana he ye precihole ki bahaut badi mistake he
Can you please click a photo of your modification and send it to me on Watsup.. it will be very helpful. Thank you
@@vepotorose9001 sure
Please post tha video of making holes on screw
Thank you for sharing your experience.I am facing the same problem and it will help me a lot
Thank you
Which scope are you using bro
Bushnell
Bhai chhota hole wapa screw ko bar bar tight krne ki jarurat pdti h kya
Drop me a msg on insta given in the description
Bhai aapne scope lgaya hai isme jhatka me hilta nhi hai kya itna jatka lgta hai mera scope to tik hi nhi rha
how r you cleaning the barrel
oiling and greecing make one video
thanks man.. if possible make one video "how to grees and oil rifle
Sure brother
Bro konsa scope mount kiya hai
Sir If u give tide also the screw will come out again an again an can't even shoot hall day yarr but sir i know how to stay the screw for parmenent but I can't explain from here 😢😅
Kahan se laya tha aur kitne Mela aaya tha
Bro. Very much helpful I'll keep it at mind, well can u tell me about its accuracy with scope? How long its zero remains and would mounting a scope with it is long last or brake the scope. Kindly respond
Accuracy is 100% totally depends on how accurately you zero the scope, a small problem which i face is the pellet grain, bcz every pellet has different grain and currently my scope is zero for 7-8grains pellet, if i shoot bigger grain pellet then i have to zero the scope again.
2) My mounting has double screw with a stop pin which prevents the scope for moving, it helps the scope to maintain its zero.
3) Yes my scope showed an issue after back to back shooting, the issue was with the spring inside which got misplaced, i fixed it easily.
I found this scope pretty good bcz of its price.
Bhai mare bhi New nx 200 hai starting mai hole Dekha to mujhe lga halka Brown tha lga rust lga ho bhai maine oil daladiya kuch hoga bhi bhai oil dailne se bataye plz bhai plz rust bhi laga hai S ayad Brown hai plz batao
Same happened with me, watch full video you will get the answer
Indian made k haar Rifles mai kuch na kuch long terms mai problems rehta hih hai, Hosake toh thora budget bara kr foreign made lena faida rehta hai khud k lye
Bhai barrel screw jo sbse chhota L key se khulta h wo milta h mera kharab ho gya h khulta hi nhi h
8879320376 ye precihole walo ka contact number hai iss number pe whatsapp kro apna bill aur problem likh dena, wo call krke apko screw bhej denge. Maine bhi mangwaya tha extra
Pls tell me this air gun mark point state side mark point
Bhai ye scope kitni kitni hai or price kitni hai bhaiya
Sx 200 mai same problem hai kya
Drop me a msg on insta
My aim went up to 4 inch aim down side is fully down but aim went up still any help
There is an option to adjust your aim, rotate the top elevation turret of your scope clock wise to move your aim up.. 1 click is usually equals to 0.1mil
Dono side tight karna hoga kya bhaiya
Drop me a msg on insta
Ese kitne der Tak loding kar ke rak sakte hai
Load krke na rakho toh acha hai , load krke rakhne se firing pressure kam hojata hai
Thank you for sharing. Mera toh srew hi girne wala horai...
Bhai Scope Konnsa hai
bahut important mesg wala video tha par aaplog jab video banatey ho tho mic apne muh k paas rakha karo itni kum awaaj hai kuch b nahi soon raha
It was my first video, ill take care of it nxt time
Bhai scope lagana chaiye ya nahi?? I heard kuch time Baad scope kharab ho jati h
I use scope for its look only, baaki mera scope toh abhi tak acha chal raha hai bas zero krna padta hai kabhi kabhi (not so frequently), log bolte hai acha mount use krne se wo problem bhi nhi hoti bt i feel zero ki problem tb bhi aati hogi kyuki ye mera 2nd mount hai. Scope ke sath rifle beast lagti hai no doubt.
@@imperialimprints Use Diana zero recoil mount..It will save your scope and zero would stay intact.
Aaj pata chala thank you bhai
Hello, Bhai scope khanse liya uske bare me thoda batao
Hi dipak, scope is bushnell 3-9x40, kisi known se liya in around ₹6000
@@imperialimprints Bhai koi online site he kya?
Finally got the solution
Vi a gun performance kai6a hai please tel me
Best
Kai baar presaan hoker maine khud se solve kiya
Bhai scope kaha se Liya aur kitne ka milta ha
Drop me a msg on insta
Thanks......brooo....my big problem
Very nice
Aapka scope kitna saal hogaya hai
Drop me a msg on insta given in the description
Bhai ye scope kitne ki lee hain apne
Drop me a msg on insta
Bhai scope kaise milega
Please
Maine friend se liya, 5500₹
What is the price??
Thanks bro Nice video.
Sahi h
What's your scope price
5500
Which scope are you using for nx200
Bushnell 3*9*40
@@imperialimprints how much bro give me link
❤
Used vaseline for cleaning dnt use oil
Jor se bolo avaj nahi arahahe
Sir...mera. ko v scope chaiyeee....I have not scope 😭😭😭😭
This won't solved to fixed the barrel, after 5,6 shot it will get loose again.
Price
.
Why buy such weapons when you can add some more & buy a imported one
This is definitely the best one in its segment, and better than few imported models available in the market..
Bhai isme alanki kitne ki lagti h
Already mentioned in video
How to website this order
Please send me bhai❤️
Kya mujhe bhi lena hai
Drop me a msg on insta given in the description
Speed is good..but most disgusting air rifle I've ever experienced!
Me too
Bro price kya is air gun ke
Around 13k
@@imperialimprints online ya offline liya Bro
@@andbhakt1 www.airgunkart.com
Very good bro
Good information
Bhai mujhe bat krni h ap se......plz ek bar reply kijiye ga
Hanji
buying link? please
Drop me a msg on insta
Thank you so much.
Thank you sir 😘
Mujhe 2nd day he problm aa gyi thi
👍👍
Thanks veer ji
👌
👍
Sir aapne ye airgun kaha se li?
Drop me a msg on insta given in the description
Think bro
Ye problem to kuch bhi nahi bahi
Scope lago to scope Tut jata hai bar bar
Scope ke problem hai
Same problem nut dhela ho jata hai
Drop me a msg on insta
How much price
I got it at a very good price around ₹13000
Thank sr
Does the recoil of the gun damage the scope..
No
Same problem sir
Tnxs bro
Ana cost antha ana
Drop me a msg on insta
Bharat Ratna to mil hi jayega..
😄
I am order this gun
Bhai Sach hai ya jhooth hai hamen dikha dikha dikha dikha kar pagal kar dete ho bhai kab jab se kharidna chahte Hain
Bhout sadewi video banai aapne bhai kyu apni majak banare tumhe jo bhe liki karega who bhe bewakufh hai 😀
I have this
Takings
Khana kha kar boliye.
😄
Aap ki awaz bahuth kam hai..
This was my first video, will take care in the next one
Phone nobr daldo ordr korega
Number dena Bhai apna mera toh bhr aw gy but tyt ni ho raha
Insta: mojo_oldschoolapbt
Thank you so much.