DIY Jeep Cherokee XJ Winch Bumper From A Kit Anyone Can Build
Вставка
- Опубліковано 28 лип 2024
- In this video I put together a diy bumper kit for my jeep cherokee xj. This kit can be found on amazon in a winch and non-winch configuration and is a lot cheaper than the other companies who put out basically the same product. If you are looking for more instruction these are basically the same as the JCR instructions. Check out the link below for this Jeep XJ DIY Bumper kit. Thanks for watching.
DIY Winch Bumper: amzn.to/3nm3Sgk
Welding magnets: amzn.to/3zRvsqG
Angle Finder: amzn.to/33ciTuh
DIY Rear Bumper: amzn.to/3zRhEN4
Smittybuilt 9500lb Winch: amzn.to/3HYwIv4
Follow us on Instagram : @itsprojectventure
Please e-mail itsprojectventure@gmail.com for all business inquiries.
DISCLAIMER:
This video is intended for entertainment purposes only. The creators of this content and any affiliates are not liable or responsible for any property damage or injury as a result of any information contained in this video. Some links above are affiliate links which there may or may not be a small commission on the use of these links. - Авто та транспорт
colemans have dates on the bottom of them 1959 oldest one ive got... looks great the bumper that is
Great work, looks really nice. I managed to rework the factory bumper and now I have a hidden winch. 🙂
That’s cool. I always liked those.
@ProjectVenture A lot of work, but I wanted a hidden winch and I like how it turned out. 🙂 I also have a video if you want to check it out.
Cheers!
In a fabricator and have built a lot of steel and aluminum boats. You never make long continuous welds like that in anything and especially thin sheet metal. You'll warp the hell out of it.
The trick is to weld a little bit at a time and jump around. Otherwise as you said, It will turn into a potato chip.
I just bought a 92 cherokee sport. It's a 2 door 5 speed manual which I've been told is rare and hard to find. I'm so excited to upgrade it and make it how I want it. Your videos have really inspired me. You've got my likes and subscribe 🤘
Great video man. I like that you included info about the vacuum canister at the end. Keep up the good work with your channel
Great video, thank you! I plan to adapt this bumper to my Geo Tracker
Those things are awesome
Thanks
That was awesome.
Time to learn how to Weld.
👍
I’ve been pretty stuck on either buying a bumper or building and I think after watching this I’m just going to get the kit and build it myself. Great vid bud
That kid is gonna be one hell of a fabricator one day...."SO how old are you"...."im 18"...."Ha Ha Ha, how many years of experience do you have then"....." Ha Ha Hell I have 18 years of experience"....." Well then, You are Ha Ha Hired"
😂😂😂
Haha nice Coleman collection I have about 40 of those old lanterns!
Awesome video I think I’m gonna go and buy that kit.
Thanks. I was never really into them until I inherited a large collection. I had a bunch of stoves for a while too but they take up a lot of space.
Wish they had a receiver version besides the winch one too. Nice build though
Are you building a stubby?? Wish you would describe the kit and the weight of the materials. No description or mention of what came in the kit and what it cost.
Good video, keep up the good work. You can never start kids to young 😆 lol
He loves it. Now that he is walking every time I go out in the garage he heads straight for the door.
I ended up getting this kit after this, and a few other videos. One problem I had, is that I was sometimes getting gaps where my seams should have been because of the little tabs holding the parts together. I am planning on getting the rear bumper, but was considering cutting the tabs off and just tacking everything in place instead of doing the bends, and I would like to know your thoughts.
In theory it shouldn’t be an issue. My only concern would be if it offsets where it mounts but it should be close enough it shouldn’t matter.
Great video, nice work. Can I get the drawings of this work with the sizes so that I can do it for my car xj, as I am from Egypt, I would be grateful if you send me the drawing, thank you very much
Nice video I had a JCR bumper that was on my old jeep with had been flipped 6 times and took the bumper and the JCR tie-in brackets clean outta the frame, I'mma try and use this kit to rebuild the JCR bumper if even possible.
Question tho, are you just using regular flux core welding wire or do you run gas.
I used flux core.
What bolts did you use for the passenger side diameter wise you said 4 inch did you use 1/2 inch
I believe they were half inch.
Did you have any problem with the protection pieces for the wings
I’m not sure what you are referring to.
Will a badland 12,000lb winch fit these?
That is the exact winch I put in mine. I had to shave about 1/8th inch on the top towards the front though.
Except you need to add in the cost of welding wire electricity primer paint and your hours of doing it equals out to just buying a bumper but a nice little welding project
So all in all I’d say I’m about $250 into it not including time. Can’t factor in time because I have more time than money and even cheap bumpers go for $400 or more for the xjs
What is the distance from front of grill to front of bumper? Curious and not sure If this is the right kit for me.
I will check for you when I get home today.
@@ProjectVenture thank you. Would greatly appreciate it.
The face of the bumper sticks out roughly 8 inches from the base of the grill. This is not including the shackles and winch fairlead.
What kit did u git?? No views of parts or anything. Just said ya git a kit and started bending. We can't know what you have to work with?? You're supposed to be sharing info. What you have and what came in the kit... .source price no show and tell.that'd why it's called a video. See ya. Gonna go watch bleepin.
The link to the product is in the description and should have all the info you are asking for.