Chkl, Yes, as evident at 4:17 one stump was not enough, then they jumped to three - which was too much; but even 2 stumps starting after 6:16 was too much as well. Something might be off or really tough type of tree; cuz I've seen this old girl do better. This was an older crambo 6000 - maybe a 2012,13,or 2014 I'd guess.
@@lorisprincivalle why does it keep stopping? I think the design of the cutting blades are inefficient or there's not enough power for the blades to keep turning.
@@lorisprincivalle If the teeth are too aggressive then it should easily chomp through the wood but it doesn't. It shouldn't need to stop or go in reverse. The blade is a poor design. Now look at the first machine in this video. It doesn't stop for breaks or go in reverse. This is one of the best designs. ua-cam.com/video/dhWvrRs6AcM/v-deo.html
Yes, as evident at 4:17 one stump was not enough, then they jumped to three - which was too much; but even 2 stumps starting after 6:16 was too much as well. Something might be off or really tough type of tree; cuz I've seen this old girl do better. This was an older crambo 6000 - maybe a 2012,13,or 2014 I'd guess.
As evident at 4:17 one stump was not enough, then they jumped to three - which was too much; but even 2 stumps starting after 6:16 was too much as well; so something I think is off or really tough type of tree, cuz I've seen this old girl do better. This was an older crambo 6000 - maybe a 2012,13,or 2014 I'd guess.
Alot of people saying this machine is in-efficient and slow, i would just like to point out that what we see going into it, is the strump and the first part of the tree at the base of the trunk, as far as i know this is the hardest part of the entire tree, so maybe cut the machine some slack?
Just think of what it could do if it had the correct powerhouse with it. they need a few more rats in the cage, the two they have dare doing a poor job of it.
A little weak on horse power. A lot of time wasted when it stops and has to reverse. There are others that I have seen that just keep on going no matter how heavy the load.
Inefficient machine. Too slow, under powered, pausing and reversing screws too much. Plus video shot is a bit too close, better to pull back a bit for a slighter wider view.
Ditto; As evident at 4:17 one stump was not enough, then they jumped to three - which was too much; but even 2 stumps starting after 6:16 was too much as well; so something I think is off or really tough type of tree, cuz I've seen this old girl do better. This was an older crambo 6000 - maybe a 2012,13,or 2014 I'd guess.
Inpréssionant! La force, de la broyeuse!!
Notice, that the conveyer belt is empty more or less half the time. Says a lot about the effiency of this machine.
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
This machine makes onions cry. Geez
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
That machine is taking more breaks than a federal employee
Chkl, Yes, as evident at 4:17 one stump was not enough, then they jumped to three - which was too much; but even 2 stumps starting after 6:16 was too much as well. Something might be off or really tough type of tree; cuz I've seen this old girl do better. This was an older crambo 6000 - maybe a 2012,13,or 2014 I'd guess.
@@lorisprincivalle why does it keep stopping? I think the design of the cutting blades are inefficient or there's not enough power for the blades to keep turning.
@@lorisprincivalle If the teeth are too aggressive then it should easily chomp through the wood but it doesn't. It shouldn't need to stop or go in reverse. The blade is a poor design. Now look at the first machine in this video. It doesn't stop for breaks or go in reverse. This is one of the best designs. ua-cam.com/video/dhWvrRs6AcM/v-deo.html
Is overload... see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
@@01mustang05 perhaps replacing the shafts teeths would do the trick, brand new shredding teeths ready to DO WHT THEY were supposed to do....duh!
Voilà une machine qui fonctionne bien !!!!!
Ecco una macchina che funziona bene !!!!!
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
You should see one of these machines with a motor on it to turn the grinders. They work so much faster.
This is the best ever crusher video I have ever watched. I love the loading method. So funny watching it
@@lorisprincivalle thanks
If that's the case it's apparent you haven't seen many.
@@daveycrocket2855 I have seen alot before saying that
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
@@lorisprincivalle Thanks for the link
Clearly overloaded, again and again.
Yes, as evident at 4:17 one stump was not enough, then they jumped to three - which was too much; but even 2 stumps starting after 6:16 was too much as well. Something might be off or really tough type of tree; cuz I've seen this old girl do better. This was an older crambo 6000 - maybe a 2012,13,or 2014 I'd guess.
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
Puttingnin too many stumps is straining the shredder engine. It is more efficient to just chew up two at a time !
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
OVERLOADED TO MANY TIME AND TIME IS MONEY
As evident at 4:17 one stump was not enough, then they jumped to three - which was too much; but even 2 stumps starting after 6:16 was too much as well; so something I think is off or really tough type of tree, cuz I've seen this old girl do better. This was an older crambo 6000 - maybe a 2012,13,or 2014 I'd guess.
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
Alot of people saying this machine is in-efficient and slow, i would just like to point out that what we see going into it, is the strump and the first part of the tree at the base of the trunk, as far as i know this is the hardest part of the entire tree, so maybe cut the machine some slack?
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
Just think of what it could do if it had the correct powerhouse with it. they need a few more rats in the cage, the two they have dare doing a poor job of it.
Dave Lima no, its just being overloaded by a couple fucking morons going to cost their boss huge fucking money. God damn idiots.
Yeah, more rats!
@@clearnews7344 You shouldn't use God's name like that.
Clear News no just buy a Doppstadt Inventhor
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
An excellent video. ♡ T.E.N.
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
Ma si ferma ogni 10 secondi ci vuole più potenza💪💪💪💪💪
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
👍👏🙋♂️💤🌈
Grazie
The machine is struggling.
Performance: Diesel engine with 242/328/429 kW
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
Se la macchina la caricate un po meno, forse si sforza meno e ci mettete meno tempo a macinare.
Poca potenza non si deve bloccare girare velocemente
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
We load ours with a excavator and a stump shear ......it really ups the production ....and much easier on the shredder
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
Let's see what is coming out the bottom for a change.....
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
I have to laugh at the start of this viedo , it looked like chicken bones in the grinder not tree stumps.
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
Machine is kind if weak. Maybe just shred rose bushes.
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
Hungry machines
yes but it needs more horses i think under its belt
Looks like a re grind machine.
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
A little weak on horse power. A lot of time wasted when it stops and has to reverse. There are others that I have seen that just keep on going no matter how heavy the load.
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
Checked out your other Crambo but not much better I think I'll look elsewhere.
Inefficient machine.
Too slow, under powered, pausing and reversing screws too much.
Plus video shot is a bit too close, better to pull back a bit for a slighter wider view.
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
Ma si ferma ogni 30 secondi ha poca potenza
È più ferma che in movimento non mi sembra il massimo
Guarda il nuovo CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
Cosa ne pensi?
Needs more power at least double
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
Stops too often.
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
Whatbis the purpose of showing this machine? To show how worthless in is?
I Don't like the 5 sec pause when it changes directions. Waist of time.
Ditto; As evident at 4:17 one stump was not enough, then they jumped to three - which was too much; but even 2 stumps starting after 6:16 was too much as well; so something I think is off or really tough type of tree, cuz I've seen this old girl do better. This was an older crambo 6000 - maybe a 2012,13,or 2014 I'd guess.
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
Schredder incapable
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
Weak. Not for stumps.
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?
Piece of worthless underpowered junk!
see the new CRAMBO 5200 direct
ua-cam.com/video/iix2Us5Irf0/v-deo.html
what do you think?