This is my ever best gold hunting machine . No hassle you can get any size of gold at any time . Not like the minelab we ich is a pain in the .... Not able to do this in only one set up .This machine even allows me to make after a audio learning curve , the difference between a aluminum pull tab and a gold ring . I can tell , as I also had a whites TDI SL pulse wich is less deep and has less audio différenciation capabilities .
Esa máquina e extraordinária. Foi em 2013 que postou ese videio ainda tem a máquina. ? Dificilmente alguém se destaca faz de uma máquina como esta . Até porque nuca estraga né. Muita qualidade excelente.
This is the best test of a metal detector i have ever seen on youtube or anywhere , thank you very much... i was wondering how it would do in mineralized soil and with the deepseeker. Also you maybe forgot to show how the non motion mode would be on these targets,,, well it was close to the ultimate test , thanks again.
Lol, Yea that NMM is a bit cranky near town. I did a new short video of it on my channel of using the NMM in the bush and to see how stable it is. Will do more NMM test soon...
The XP ORX with the HF coil Gold Prospecting coil hit a 4.6 gram nugget in Arizona at 18" inches + and it was a loud woof woof ........No headphones ...... I sold my ATX ......
Any test soon with the deepseeker coil? Would love that . As i am aiming for the deep nuggets close to/on the bedrock , and no i wont miss the smaller more shallow nuggets as i could change coil and work the patch again.
Andy, I don't have the real big coil yet...hope to get it soon though, I exchanged it for the 8" mono instead when I ordered, which I need more in my area of hunting. Thanks.
I love your effort. I am confused to buy my first metal detector now I finalised ATX I am living in Pakistan please guide me where to buy this product.
would like to see how much noise would be produced while swinging before it comes across the object. another words would there be enough difference to dig. thanks for the vid.
Yes; it was a bit noisier while scanning as I did not ground balance during the test much to get max depth. I think if it was just and inch or so less deep, you would investigate the sound more. At the max depths it can a bit tricky as it could sound like ground noise if you have the ground balance a little hot. You must have fast forwarded a bit because in the video I did a bit of scanning to the target...
Impressive test. Thanks for the test/video Bearkat. Do you know how bad the ground is for the test? Did you happen to see what the ground mineral number would read on an ATP Gold?
That's one deep detector. I love my AT Pro, but I don't think it will go that deep. I wouldn't want to dig that deep anyway. It would wear me out. Thanks for posting the video.
Works fine in pasture. It DOES NOT have a disc mode. But it has disc adjustments and it will lose depth the more you turn it up. Best to use audio disc or reverse disc adjustment to keep it at full power.
Bearkat4160 how much depth it lose to dis out iron? carnt u set it up so it will just churp on iron? so u dont have to set it up high? i live where there is alot of iron u see. i also owned the infinium, but i hated how bulky and heavy it was. lol
Wayne Shepherd The best way to check iron is use the iron check feature. It is fast and accurate. It is just a push of a button - but if you try to disc out iron on a pulse detector you will pretty much miss every thing else that is worth anything. The ATX is heavier than the Infinium but better balanced, it does not bother me at all. Just a very powerful easy to use detector compared to paying $6000 for a Minelab.
Bearkat4160 thanks for the reply, shame u havnt tested a copper UK coin, say Penny or Half penny size! i wounder how it perform's with a copper coin. =P
That is my combo I use in the field but one is a VLF and one detector is pulse induction....can't really compare. But the hotter the dirt the more likely you should grab the ATX.
This is my ever best gold hunting machine . No hassle you can get any size of gold at any time . Not like the minelab we ich is a pain in the .... Not able to do this in only one set up .This machine even allows me to make after a audio learning curve , the difference between a aluminum pull tab and a gold ring .
I can tell , as I also had a whites TDI SL pulse wich is less deep and has less audio différenciation capabilities .
Esa máquina e extraordinária.
Foi em 2013 que postou ese videio ainda tem a máquina. ?
Dificilmente alguém se destaca faz de uma máquina como esta .
Até porque nuca estraga né.
Muita qualidade excelente.
This is the best test of a metal detector i have ever seen on youtube or anywhere , thank you very much... i was wondering how it would do in mineralized soil and with the deepseeker. Also you maybe forgot to show how the non motion mode would be on these targets,,, well it was close to the ultimate test , thanks again.
Lol, Yea that NMM is a bit cranky near town. I did a new short video of it on my channel of using the NMM in the bush and to see how stable it is. Will do more NMM test soon...
But you have the scan thingy for the most silent freq. or ?? :P
The XP ORX with the HF coil Gold Prospecting coil hit a 4.6 gram nugget in Arizona at 18" inches + and it was a loud woof woof ........No headphones ...... I sold my ATX ......
thanks for your time best test on youtube so far.
bro,you have to scan before you burie the coin ,so we know it is nothing there before.
That's not hot ground at all my ATX won't run stable on anything over 4 on the sensitivity
Any test soon with the deepseeker coil? Would love that . As i am aiming for the deep nuggets close to/on the bedrock , and no i wont miss the smaller more shallow nuggets as i could change coil and work the patch again.
Andy, I don't have the real big coil yet...hope to get it soon though, I exchanged it for the 8" mono instead when I ordered, which I need more in my area of hunting. Thanks.
You should try the Non-Motion mode on some of those iffy signals. It should give a little better signal.
Yea ;I just did a quick demo of using that mode out in the bush...check it out on my channel.
thanks for the video mate
God bless
Love the cool violin sound
Good day comrade. Please tell me, which is better in depth:- GARRETT ATX or GARRET AT GOLD ?
Nice test buddy! Hey those nuggets look vaguely familiar... hmm...
Yea man, Good ole' Rogue River nuggies!
I love your effort. I am confused to buy my first metal detector now I finalised ATX I am living in Pakistan please guide me where to buy this product.
Salam aikom .
If still you need the device let me know. I can help.
would like to see how much noise would be produced while swinging before it comes across the object. another words would there be enough difference to dig. thanks for the vid.
Yes; it was a bit noisier while scanning as I did not ground balance during the test much to get max depth. I think if it was just and inch or so less deep, you would investigate the sound more. At the max depths it can a bit tricky as it could sound like ground noise if you have the ground balance a little hot. You must have fast forwarded a bit because in the video I did a bit of scanning to the target...
I love your videos brother
I am brazilian prospector and may dream is to living in USA
Impressive test. Thanks for the test/video Bearkat. Do you know how bad the ground is for the test? Did you happen to see what the ground mineral number would read on an ATP Gold?
Yes my AT Gold number for ground balance was around 80 usually.
That's one deep detector. I love my AT Pro, but I don't think it will go that deep. I wouldn't want to dig that deep anyway. It would wear me out. Thanks for posting the video.
How deep does this device go?
That's pretty good by gully
Hi Bearkat4160 thanks for the video. could u by any chance. do the depth test with the discrimination on and off on the silver coin. Thank's
Yes Wayne, I will do a Silver test with the ATX soon! Coin and Nugget form...
Great video Bearkat! Tell garrett to pay you!
i was about to buy this item and i see you comment... please could you explain me why not to buy this?
this or equinox 800, which is deeper?
What is the max depth for the ATX
HI HOW WELL DOS THE MACHINE WORK IN PASTURE? AND HOW MUCH DEPTH LOST IN DISC MODE, I SEEN IT LOSES ALOT.
Works fine in pasture. It DOES NOT have a disc mode. But it has disc adjustments and it will lose depth the more you turn it up. Best to use audio disc or reverse disc adjustment to keep it at full power.
Bearkat4160 how much depth it lose to dis out iron? carnt u set it up so it will just churp on iron? so u dont have to set it up high? i live where there is alot of iron u see. i also owned the infinium, but i hated how bulky and heavy it was. lol
Wayne Shepherd The best way to check iron is use the iron check feature. It is fast and accurate. It is just a push of a button - but if you try to disc out iron on a pulse detector you will pretty much miss every thing else that is worth anything. The ATX is heavier than the Infinium but better balanced, it does not bother me at all. Just a very powerful easy to use detector compared to paying $6000 for a Minelab.
Bearkat4160 thanks for the reply, shame u havnt tested a copper UK coin, say Penny or Half penny size! i wounder how it perform's with a copper coin. =P
how would the at gold do compared to atx,
That is my combo I use in the field but one is a VLF and one detector is pulse induction....can't really compare. But the hotter the dirt the more likely you should grab the ATX.
i dnt think ATX will bt GPX5000
It will beat it on small gold and price! New video to show this soon...
Could you please do the same test with a Whites tdi please please please