Low cost microscope review
Вставка
- Опубліковано 29 сер 2020
- Affiliate link to go directly to the banggood microscope:
www.banggood.com/custlink/3Km...
Subscribe to Matt's youtube channel Fixed Until Broken, lets get him over 1000 subs.
/ garnerdesigns
Unboxing and Review of the Mustool G1200 12 MP 7 inch 1200X zoom Microscope for micro soldering. - Наука та технологія
Affiliate link to go directly to the banggood microscope:
www.banggood.com/custlink/3Km...
Subscribe to Matt's youtube channel Fixed Until Broken, lets get him over 1000 subs.
ua-cam.com/users/GarnerDe...
Thanks for the reviewing this. Now I'm wanting one now, lol. Great to see you back, Jeff! Been missing your awesome videos. I know it's slow due to pandemic. Hope you're staying safe!! Take care, my friend!
Glad to see a notification from you Jeff, I may have to give one of these a try. Hope all is well!
Thanks for your comment about lack of depth perception. I do really small stuff under an illuminated magnifier. I was considering a $100 version. So I went back to the magnifier and closed one eye. Missed the board half the time. Used both eyes and didn't miss once. Never even thought. Now I need to look for an inexpensive stereo scope :-).
I am glad to see you posting more videos
Thank you...Great microprescop.to start with.good job.
Nice work.... Could you specify how to get better solder Flux
Jeff I just subscribed to Matt’s Channel. Looks very interesting. Thanks for sharing. Jeff what solder and flux would you recommend for thru hole and surface mount soldering. I’m new to this field and taking auto electronics courses. Trying all different aspects of the field. I’m a retired aircraft mechanic ( high performance military) and have just been hooked on learning everything I can. Thanks for sharing and enjoy your videos 🇺🇸😊 Artie
Thanks 4 the review! I just ordert one with your affiliate link. Looks like planty sufficient 4 my occational use cases.
I am looking for a microscope like this one but I need to be able to turn off the LED light when I need to. Is there one that you know of where you can turn the light off?
Thanks for the very helpful video.
I have the same G1200, but I can't see such an image, no matter I doing with adjustuing and zooming.
Thank you.
Hi jeffescortix. Wanted to ask for your opinion, personally, I would like to use this for soldering PS3 Board or maybe motherboard repair. This the stand seem be too small and closed to the edge which will affect the angle the camera could hold? Is this suitable for big-size board repair? if not what do u suggest what for a low-cost microscope yet cheap and usesable?
If you're on a budget a camera-screen style microscope will get the job done. But for large boards you might have to make a custom mount.
the first thing I'd do is to mount the big metal base backwards, so its not in my way. would that be possible?
I believe it would be possible, but I haven't actually tried.
It looks like the stand for the scope could be an issue. Limits the "depth" of the workpiece that can be used. Otherwise it is surprising good resolution.
Correct, if the PCB is big it could hit the stand. I think it was designed around mobile/phone repair by looking at the shape of the stand platform.
I put that microscope on articulated Vesa mount that made it much more useful. It is not as good as stereo zoom microscope but, the focus wheel in the front has a range from 1-5 inches!
Sounds like a great idea!
Got one and I recommend to all beginners.
Hopefully they've improved it over the smaller version..I had 2 of those and both had firmware issues and died a short time after buying them.
If it has any reliability issues I'll make a sticky comment here. The USB power adapter feels pretty cheap, I wouldn't be surprised if it's the first thing to fail.
@@jeffescortlx From what I've seen it looks like they've improved it over the smaller version..The video quality looks a lot better and the firmware looks different as well so it might be ok..The Usb power adapter looks the same and it works but yeah not the best.
Hello! You can change the angle of the microscope with the screw of the base, bend it backwards so you dont geht the "mist" into the lense - and you get better view of 3D dimensions.
Yes, the bottom base attachment is hinged and allows it to lean back at any angle.
@@jeffescortlx Would the distance between the bar and components in the middle of a laptop motherboard be a problem? It seems like you might not be able to reach every component on something as big as that without the side hitting it and stopping you.
@@fakename3344 yes that's possible if the board is large and if you need to see the center. But I'd think a custom/modification stand could take care of that.
@@fakename3344 also it can be tilted back to reach the center of large boards.
Thanks Jeff as always you are great my friend. Can you leave links to your scope as well cause I would be very interested in buying all the equipment you have on it and it. Thanks James
www.amazon.com/AmScope-7X-45X-Simul-Focal-Lockable-Microscope/dp/B01H4FOLVM/ref=mp_s_a_1_1?dchild=1&keywords=AmScope+7X-45X+Simul-Focal+Stereo+Lockable+Zoom+Microscope+on+Dual+Arm+Boom+Stand&qid=1598801339&sr=8-1
Barlow lens, led ring light, camera and camera adapter sold separately.
@@jeffescortlx Thanks Jeff!!
Was wondering this too. Which extra parts did you choose and why for your microscope,thanks!
@@Crazylogix007 I basically copied Louis Rossman reccomended set up, except the camera for recording. I have a video review on the camera I'm using to capture footage on my channel.
Do u fix 2002 gmc yukon denali
will the unit still on if you connect it to PC and the battery is empty?
I would think so. The USB cable going to the PC should power it I would think.
So I woke up and saw I got 10 Subs in the last hour. I was like WTH where did that come from? Now I see. THANK YOU for the shout out! BTW Its my birthday so thank you for the awesome birthday present!.
Happy Birthday!
Happy birthday
@@JP-bd2jf Thanks!
@@FixedUntilBroken Been subscribed. Nice to see the all the good cluster techs start to unite.
Hi this is suitable for mobile repairing? Am doing jumper some tracks and also charging ic ,is this okay?
It's a good starter unit. But if you're doing this professionally you'll eventually want to get one of the big amscopes.
good review thanks a lot. Do you solder directly under your big microscope or are you looking at a display connected to it ?
I use the amscope optical eye piece for everyday use.
@@jeffescortlx i meant : do you look through the microscope while soldering ? (Im missing space using the one you reviewed)
@@MIRIVEDAN yes I look through the microscope while soldering.
@@jeffescortlx thank you
Happy birthday
Can you use it on a larger LCD monitor
This one here has a HDMI out ua-cam.com/video/8DPaOTkDNVQ/v-deo.html
Just a quick question I have a Toshiba exterior hard drive and I bumped it and it fell over and now all it does is Click it's not reading anymore. It is full or otherwise I wouldn't bother trying to repair it would you or do you know of anybody who will be interested in fixing it
That's crashed heads that cause that. That's not a super simple repair fyi. (I don't do them I used to be interested in doing it so I did a lot of research. I don't know if Jeff has any better suggestions but Rossman repair group does them and a few other UA-camrs.
@@FixedUntilBroken I'm guessing who ever will do the data recovery will need to buy an identical hard drive and swap the platters?
@@jeffescortlx I'm not an expert but I think it's more common to swap the heads. I think the hard part is getting the old heads off the platter while it's crashed without damaging the platters. I know a lot of people try to force them off and scratch it all up.
i may have some extra gm cluster pigtails if you want them
If you have a Buick Rendezvous, 15+ GM truck, The early 00's Camaro plugs I would interested. I also don't have any of the corvette ones.
I bought one of those and it's quite useful - the power supply that came with it is utter garbage and the best place for it is the closest trash can.
Yes the USB AC power adapter feels pretty cheesy but the rest of it is impressively good.
Is this the best budget scope in your opinion? As of 2021?
I haven't shopped around, but it still seems like a good value.
What is the amscope you use?
SM-4TP 7X-45X Simul-focal Trinocular Boom-arm Stereo Microscope with Barlow lens and LED light ring.
What iron do you use?
T-12 Oled
Do you fix all type of GMC clusters
99-07 for full size. 01-13 for most GM cars.
@@jeffescortlx I have a 2002 gmc yukon denali I just bought speedometer donesnt work,and the oil dose bounceses around I bought all new parts for it.i had a stroke in2019 over 2 years ago was going to replair it my self I worked 28 for Cadillac and done them before. What do u charge for your service
@@johnisenhart3308 chances are if the MPH doesn't register at all the cluster isn't seeing the VSS signal. I'm impressed you've found new air core motors, this will stop the bounce in the oil gauge. New ones have been hard to find for the last ~10 years.
I was wondering if I could send you my Gm instrument cluster odometer is out, I’ve been following you for quite a while on UA-cam and I like your work I don’t trust anyone else I’m hoping that you will except my offer there please let me know I’m from Michigan Ann Arbor Michigan
Sure contact information is here: ua-cam.com/video/T_2WnJMsZaU/v-deo.html
Can you tell the difference between the fake and real amtech honestly
Yes 100%. The fake pops and fizels wouldn't be good for BGA work. It's also is harder to clean up, and it's more mustard in color. But besides that it makes fine joints.
how much the price?
0:30
Also link is in the description and the top pinned comment.
lol the screen cover just had to come off :-D
That looks like a good value microscope for someone that can't really sell a kidney for a one off job.
Turn the base to the back and plop a weight on it, the pcb could sit on a nice grippy mat then :-D
Yes Al-You-Mini-Umm, yes i'm an evil english bloke with daft spellings ha ha :-D
I wonder who will try to replace the lcd with a bigger lcd, someone is bound to have tryed.
Oh... Sol-Der, not Sod-Her (She may or may not like it) ha ha :-D
That's a good idea with turning the stand backwards to work on bigger boards!
@@jeffescortlx I'm smarter than the average bear, maybe :)
LOL !
Havya temizliği çok önemli cokk
ipuçlarım iyi gidiyor. onları temiz tutmak için yolumdan çıkmıyorum. ucuz taklit ipuçlarıdır, ancak uzun süredir devam etmektedir.
US$72.99 as now--
i bought it g1200 , and used it for a month , and i regret it , the image quality is very bad , it never gives good balance between light and dark areas , the light is refleced directly to the camera when working with cicuit boards or electronics repairs , cannot see the parts clearly and the colors is not clear too , cannot tell if there is some thing dicolored or burned ,
and after a month or so of usage , it died , it doesnt turn on , i opened it and tested the board , i found the circuit board to be shorting on the power area next to the charger port , and its poor design seems to have failed in short time because it generates lots of heat while it doesnt have and proper cooling ,
its one of the worst microscopes in the market and no matter what price you pay for it , doesnt worth it
never buy this model , you will end up throwing it in trash
lousy company to work with. expect long wait due to carrier delays
dirty tip gross