Maiden Flight on a Vintage RC Bi-Plane - Crash and Fail
Вставка
- Опубліковано 14 жов 2024
- This first attempt of flying a vintage RC bi-plane. Not sure if the maker. Maybe Hangar 9? Maybe Black Horse? Lol. I don't think so.
Our apologies for the crummy audio.
Hmm… It appeared the CG was not in the right place . 😂 😂Another super entertaining episode! Thanks!
So many people don't seem to even bother to check, and maybe they don't know to check basic trim issues like this. Of course it is the CG, it's massively too far aft.
It is a Honker Bipe by Southwestern Sailplanes and later Marks Models. I had one in the 80's powered by an O.S. 25. It flew okay. Yours seems to be tail heavy. The plans show the CG located 3 inches back from the leading edge of the upper wing. Southwestern also made a 1/2A powered monoplane that used the same wing. It was a blast to fly.
Thank you for letting me know. I knew someone would recognize this plane. I actually have it repaired and ready to fly again. I'll make the adjustments and it will be in the air again.
Love how simple vintage planes are. Not trying to fake a real plane just being their own thing
LoL Captian Blaz, Salute eh. It is a old Honker Bi Plane kit plane. It seemed the CG was off some. Perhaps a touch of nose weight if the battery was the issue. Enjoyed watching and remember what goes up must come down, Sometimes with grace and and sometimes not.
The wings, if they are ONE PIECE with air foil, would be very similar to a plane I built in the late 70s. It was a “Honker Bipe”. Fly on 049.
Entertaining video. Thanks for sharing.
Yes I love the Petrinic Brothers RC from Slovenia and I have been following them for 7 years and I enjoy their humor as well as their flying. Well you had the Biplane flying for a couple minutes anyways and it looks like after changing out the broken Propeller you will be able to give this beautiful Airplane another flight attempt soon. Happy RC Flying Guys 😊💯🛩👍
Thank you. I was just looking ai it today. I had a cheap receiver in there as well in going to switch out. Not sure if that did anything, but just in case. It will be in the air again soon. Thank you for watching.
@@2BrothersAdventures-kg3dx 😊💯👍
Honker bipe, flew one 76-79. Great flyer!! They made a great glider with multiple panels of that same wing. Had one of them too.
CG. 💯
Oof been their done that 😂😂😂your silence said everything haha did you even breath during that flight 😂😂😂😂
Lol. It was something. I actually thought I was going to get it down. Everyone keeps commenting on the CG, but apparently, they didn't pay attention. I mentioned CG was dialed in. I think the problem was that there was too much travel in the servos, and I was using some cheap knockoff receiver. I was getting delayed movement in all the servos. The plane had since been repaired with new electronics. We'll do a part 2. Thank you for watching.
@@2BrothersAdventures-kg3dx haha yeah I see that bud and it looked that way but as you say later you mentioned cg was bang on lol they obviously didn't watch it all. Ding ding round 2 🤣🤣🤣👌🏼
@@2BrothersAdventures-kg3dx did you have expo as well bud? Could be dodgy servo playing up under load or a bit of latency with crap rx. You can do a glide test before flight chuck it into wind and see how she floats with no power
My guy your cg this is like the main rule everything goes around haha
Tail heavy aircraft usually ownly fly once. You managed three flights.
$300😂
Shite happens 🤷🏻 Atleast you didn't kill it, lol
Lol. It's actually fixed and ready to go again
@@2BrothersAdventures-kg3dx NIIICE 👌
cg should be 25% back from leading edge top wing!
You don’t have a clue do you ?
Captian Blaz!
Looks like he tipped the wing to me 😂😂😂😂
I can see you keep holding up elevator on takeoff that's why it's jumping off
tail heavy!! big time
It's tail heavy!
Tail Heavy to hell!
The tail is too long. It's tail. Have a big time shorten it up about 10 inches and it should fly fine.
give the camera man a mic too!
THat plane may be the reason he got out of the hobby. whos bloody idea was it to line the edge of the runway with concrete designed to stop 15 ton trucks? That poor airplane
WOW more people that don't know what their doing and should not be flying!
Crazy right!!! I hate that in people.
@@2BrothersAdventures-kg3dx Did you check the CG? Check the throws on the servos?
Yeah. Everyone is talking about the CG in these comments. I say it in the video that the CG was dialed in. You are correct in the throws. They were set way too high for that little plane. I probably don't have a delicate enough touch to fly this style of plane with that much movement.
Wow more people that don’t know how to use the English language. “They’re doing “. They are is what it stands for. Their would give possession to “doing “. I dont own doing. He might have spent more time in English class, and not flying airplanes. If you need more help speaking, every Thursday 8 pm eastern time. Thanks for watching
I’ve decided I should try to help and the only way to learn it practice. So we will try to fly better so you don’t get butthurt. But what I want from you is to do a little homework. Please look up the following, figure out the meaning and use them each in a sentence. Get back to me when you’re done. I gave you the first one (you’re vs your).
You’re and your
Two, too and to
Are and our
There, they’re and their
Wait and weight
Through and threw
Waist and waste
No and know
Male and Mail
Four and for
Where and wear
From the struggles it seems like you were having earlier I think that that’s plenty of homework to start. I don’t wanna overwhelm so get on those and again don’t forget every Thursday 8 o’clock Eastern time. Thanks for watching.
Bugga 😎🙃
CG seemed tail heavy
Needs a heap of nose weight . C..g is far too rearward
i nearly hit the exit button when i thought it was the vlads. then it gets worse - a how-not-to vid in english. FOOLS
I don’t believe these guys
This video is woke
.. 😂 sorry guys, bad humour from an Aussie who recently googled what the hell does woke mean.
. 😂
Way tail heavy, dude ......
Cg is way off
This is what happens when you don't get trained properly by a qualified instructor!!!!!!!
These aren't how-to videos. These are videos of us out in the field having fun. You taking it this seriously and getting upset over it is one of the reasons this hobby is dying off. The younger generation doesn't want to be around people like you. Take this video for what it is, entertainment. If you're not entertained, that's fine, but there is no reason to get upset about it. No one told you to watch the video. BTW... new videos every Thursday, 8:00 pm Eastern Time. God bless.
I’m an instructor if that helps 😂😂😂😂😂.
The neglagance was entertaining but the audio was dreadfully unbearable
Yes. Sorry about the audio. Something happened with the mics.