SSS OFFROAD FULL Skid Plates, INSTALL EP 213

Поділитися
Вставка
  • Опубліковано 11 гру 2024

КОМЕНТАРІ • 44

  • @davidloop4206
    @davidloop4206 2 роки тому +1

    Factory UTV.. 1/2" with the trans plate.... Way to go. Great video!!
    👍

  • @theglitch99
    @theglitch99 3 роки тому +3

    You ALWAYS show clean and thorough work. Much respect. I'm learning x3 can be difficult to work on! Alot in a small package!! ( WORTH IT)
    THANX

    • @GLifeUTV
      @GLifeUTV  3 роки тому +1

      Thank you brotha.

  • @goredwhiteblue
    @goredwhiteblue 3 роки тому +2

    Nice job Frank! Tip - keep some oil or WD-40 on the tap.

    • @GLifeUTV
      @GLifeUTV  3 роки тому

      True. Great tip👍

  • @FreedomIsntFree2023
    @FreedomIsntFree2023 3 роки тому +2

    I think SSS is the best skid on the market!

    • @GLifeUTV
      @GLifeUTV  3 роки тому

      Its so good.. Very happy with fit and finish

  • @danielgonzaga857
    @danielgonzaga857 3 роки тому +1

    One thing I loved about my OG maverick is that they had removable bolts for the skid plate so I was soooooo easy to remove the skid. For sure a awesome upgrade

    • @GLifeUTV
      @GLifeUTV  3 роки тому

      Would of been nice if atleast the rear skid was easily removable 🤷

  • @Dustin_Curley
    @Dustin_Curley 3 роки тому +1

    Patiently waiting for mine from Rev Offroad. I love the built in rockers.

    • @GLifeUTV
      @GLifeUTV  3 роки тому

      Me too...

    • @peecout
      @peecout 3 роки тому

      Hey Dustin! you have a link? looks like SSS did pre-black friday price hike!!

  • @NaatediggidyDawg
    @NaatediggidyDawg 3 роки тому +2

    Yo frank! Been watching you for a couple months in preparation for picking up my new ride 💯 yesterday i picked up my brand new 2021 maverick x3 max xrs turbo rr

    • @GLifeUTV
      @GLifeUTV  3 роки тому +1

      Congrats on your machine brotha

  • @dannyelliott8391
    @dannyelliott8391 3 роки тому +1

    Did the SSS have an option for extra protection around the engine? My buddy bought the Super ATV one and got an optional aluminum plate that goes under the engine/clutch area. The Rubicon Trail did a freaking number on my skid plate so I’m going to have to replace it soon. Good timing on the video lol

    • @GLifeUTV
      @GLifeUTV  3 роки тому +1

      I don't think so brotha🤔 i don't super atv had that option ... Maybe factoryutv

    • @dannyelliott8391
      @dannyelliott8391 3 роки тому

      @@GLifeUTV Yeah, you right, FactoryUTV.

  • @grumpyg9350
    @grumpyg9350 2 роки тому +1

    Good video bud! 👍👍👏🏻👏🏻

  • @djlansing
    @djlansing 3 роки тому

    I hope SSS hooked you up. Ur oem skids weren't even that bad.
    -gr8 vids Man! Keep em coming!

    • @GLifeUTV
      @GLifeUTV  3 роки тому

      Ur kinda right. I could of just thrown on some. New rivets where they were ripped off

  • @alejandroquintino2810
    @alejandroquintino2810 3 роки тому +1

    Been waiting on this one.

  • @ChupacabraOffroad
    @ChupacabraOffroad 3 роки тому +1

    Dragging the skids on that 15 foot wheelbase? 🤣 JK nice video 👌🏼

    • @GLifeUTV
      @GLifeUTV  3 роки тому

      Yes yes. U hate the max 😂

  • @kenkaplan4413
    @kenkaplan4413 3 роки тому +1

    I was planning on using rivnuts when I do mine. are there enough threads in the frame?

    • @GLifeUTV
      @GLifeUTV  3 роки тому

      I installed them with my 3/8 impact, with care of course.. none stripped out so i would say there is enough threads to keep tight

  • @RZR0311
    @RZR0311 3 роки тому +1

    What size utility trailer would u say for a 4 seat turbo s

    • @GLifeUTV
      @GLifeUTV  3 роки тому +1

      14ft

    • @desertnerd4353
      @desertnerd4353 3 роки тому +1

      Go 16' more room for ice chests and propane 😜

    • @GLifeUTV
      @GLifeUTV  3 роки тому +2

      @@desertnerd4353 this is true😁↑

  • @jarrodkurr4718
    @jarrodkurr4718 3 роки тому

    Did you use any heat when adjusting the rocker pieces inward or just the rubber mallet? Mine got all bent out during shipping - not sure I’ll be able to fix.

    • @GLifeUTV
      @GLifeUTV  3 роки тому

      Just used a mallet

  • @aaagarcia3920
    @aaagarcia3920 3 роки тому +2

    The upgrades never end 🙈

    • @GLifeUTV
      @GLifeUTV  3 роки тому +2

      They have ended girl.. Time for next machine

  • @MGaona82
    @MGaona82 3 роки тому

    Another awesome product bro. Great video but you'll have to install mine. I don't fit under my ride like you do. Lol

    • @GLifeUTV
      @GLifeUTV  3 роки тому +1

      If milk crates weren't in high demand you could of used them😂

  • @mandytuning
    @mandytuning 3 роки тому

    I measured oem and they're .200", that's a bit more than 3/16, 3/8 is .375,almost double

    • @GLifeUTV
      @GLifeUTV  3 роки тому

      Depends on the model bro..my rs came with 3/8 but also. I forgot to mention these are a better material.. uhmw i a superior material

  • @robertmontoya4941
    @robertmontoya4941 3 роки тому

    I know this is off the topic of the video, but I wanted to get you input on who is running the best tie rods? looking Into shock therapy but lmutv look pretty nice as well. you have any discount codes at the moment?

    • @GLifeUTV
      @GLifeUTV  3 роки тому +2

      Either. Both are 6061 billet aluminum both run 5/8 heims.. i run shock therapy. Cj runs lmutv... The shock to therapy cones with bump steer delete spacers. But u can buy the separately for the lmutv. i have a discount code for lmutv frankg15 at checkout

  • @AngelLopez-fc8wf
    @AngelLopez-fc8wf 3 роки тому +1

    They look good bro I need to replace mine