Man I can’t thank you enough!!! I was going crazy trying to figure out why my car wasn’t detecting my key fob. I replaced the battery and that didn’t fix the problem. So a guy recommended that I reprogram the remote key. I bought a new one and tried to reprogram both remotes using your video and it worked for the new key and not the old one. So it was a problem with my old key fob all along. And your video 100% helped solve my problem. Now I don’t have to manually unlock and start my car any more. Thanks a million!
Thank you so much for the video 🙏🏽 ‼️‼️After programming all functions worked accept for remote start. So I held the near the push start button & held the lock button down for 3secs & the remote start works!!‼️‼️
Great video, did mine yesterday and some of the features worked,remote start,lock unlock from new remote worked,car would only start with new fob in console fob holder and the keyless lock/unlock from door handle not working,gonna try programming again,nevermore good job👍
Great video, but what I learned was, I had bought spare keys before and my 2015 Impala knew that. When I went into program mode the car said key number 4 ready. So I programmed 2 new key fobs in 3 mins. I didn't have to wait the 10 mins between programming because the car had made keys for me in the past.
i did everything and after “ready for remote one” when i took out the key the unlock button didn’t work so you think maybe the battery is dead i used it all the time but i always have to put it in the middle console
This was very helpful. I noticed doing my 219 if you all the fobs present you can skip the timer segments and go right to the next fob to be programmed. Under 2 mins.
I brought two key fobs from Amazon but they didn't hv proximity. Found this out after I used your video. Everything works but I can't turn on without key being in the transmitter.
Do you need to program the first remote ? My unlock button is broken and I won’t be able to do that step with my old key . I have a 2018 impala push start
@@AS-pr4ww Mine doesn't go into learning mode. It just says the key fob Numbers then programs a new one after I push the start button. Maybe I have to reach the maximum fobs first. On a 2014 impala ltz that conforms to regulations: 2015 FFV.
PLEASE READ to exit the pairing mode Hold the engine / Stop button If not the screens will go black and you’ll think you did something wrong an the car won’t start
Did this in under 10 minutes on a 2019 impala. Held the brake down , then pushed the start button 5 times. It said ready for remote 1 then I did the second one. After that I held the start button for 12 seconds then it started with the new key
Man I can’t thank you enough!!! I was going crazy trying to figure out why my car wasn’t detecting my key fob. I replaced the battery and that didn’t fix the problem. So a guy recommended that I reprogram the remote key. I bought a new one and tried to reprogram both remotes using your video and it worked for the new key and not the old one. So it was a problem with my old key fob all along. And your video 100% helped solve my problem. Now I don’t have to manually unlock and start my car any more. Thanks a million!
THANK YOU! This is the ONLY video I could find for push-button ignitions and it worked like a charm after my keys were stolen.
Thank you this video just saved me $400 dollars in my home town Louisiana
Thanks for this video. Just made an appointment at my local chevy dealer they want $140.00 gonna go outside and try this.
Thank you so much for the video 🙏🏽
‼️‼️After programming all functions worked accept for remote start. So I held the near the push start button & held the lock button down for 3secs & the remote start works!!‼️‼️
Thank you. Great video and You just saved me $300 for not having to go to the dealer.
Thanks, saved me some money. Great instructions.
Thanks a lot for your video! It worked great. The manual wasn't as clear as you are when making the programming...
Great video, did mine yesterday and some of the features worked,remote start,lock unlock from new remote worked,car would only start with new fob in console fob holder and the keyless lock/unlock from door handle not working,gonna try programming again,nevermore good job👍
Check if the key you bought have proximity sensor. If it doesn't then that is the incorrect key. That one is for vehicles without push start
Makes sense,thanks for your help.
Where did you get the remote for your car
Wanna say ebay or Amazon
Thank you soooooo much!!!! They were trying to charge me $170+ at the dealership to do this. So grateful to have found this and I did it myself!
Just did mines bro i owe you💯🔥🔥thx so much
Thank You!!!! Worked like a charm
This worked for my 2013 Buick lacrosse premium-push start
wow thanks! I had no idea the keyhole was hidden under there. great tip!
Thanks bro! It worked like a charm!
Great video, but what I learned was, I had bought spare keys before and my 2015 Impala knew that. When I went into program mode the car said key number 4 ready. So I programmed 2 new key fobs in 3 mins. I didn't have to wait the 10 mins between programming because the car had made keys for me in the past.
Broooooo thank you soo much!!!! you save a lot of money
Do you have to push the unlock button after programming the old fob? My old one doesn’t work
Thank brother yogur video help me a lot
Can you send the link of what remote you got or we can get if we have remote start or not, from amazon
Saved money right here!!!
Excellent video ty
Great tutorial TU
You The Goat💪🏾🐐
do you have to put the already programmed key in 1st or I can just go ahead and put the new one in
i did everything and after “ready for remote one” when i took out the key the unlock button didn’t work so you think maybe the battery is dead i used it all the time but i always have to put it in the middle console
Does this written for vehicles without the push button start?
Thank you for the video , it worked!! It did put me in anti theft mode, which locked me out. After car set for 10 minutes, it reset
Same here just glad it worked
How to do this if I don't have push start?
This was very helpful. I noticed doing my 219 if you all the fobs present you can skip the timer segments and go right to the next fob to be programmed. Under 2 mins.
Very good thankyou !
You are amazing !!!
What did you mean by the bottons facing the back of the vehicle
Thank you it worked
Do you have to have the door open when you turn the key the five times? Also, do you step on the brake when prompted to push the start button?
Best to leave it open for easier access to the inside of the car, and no don't press the brake. Just press the button
Are you leaving the key in the key hole
So everything worked even auto start but in order for the car to crank all the way it has to be in the tramsmitter any suggestions?
Thank you again works hundred percent but you will need the old one n the new remotes ....put the one not working in first n than new one....
I must have done something wrong. Can't get my original factory key to work. Starting over isn't working. What should I do?
I only have one fob , so what do I do when I don’t have the second one ?
So u need the old key to get it into program mode?
I brought two key fobs from Amazon but they didn't hv proximity. Found this out after I used your video. Everything works but I can't turn on without key being in the transmitter.
Since it was amazon you can always return it and get the ones with proximity.
After turning the key 5 times to get it into program mode did you take it out of the door right away or leave it in?
You can take it out
Do you need to program the first remote ? My unlock button is broken and I won’t be able to do that step with my old key . I have a 2018 impala push start
No you dont
Don't receive the massage
" REMOTE LEARN PENDING, PLEASE WAIT."
After move the Kay 5 times
?
What if you dont have any of the original keys… just ordered one from amazon
How can u press the start/stop button when u don't have it
Good job
I get to the 2nd remote and when I hit the unlock button it won't do anything.
Tanks 🎉🎉
What if you don’t have a power button and it’s a turn key start
Do I have to have the new key cut before I program it?
That is all a preference. You don't have to.
Can you do it at all without the old key fob ? I lost mine and I got another one but it doesn’t turn
Where’s the Amazon link? I need it ASAP
Car does not go into program mode after to turn key 5 times. Am I doing something wrong?
Does anyone have the link for the key?
Do you have the link to where you bought the keys from
The one I bought is not available but make sure it says proximity sensor when buying
When I turn the key five times the dash does not come on to tell me anything?
Do you have instructions for push button start with 1 working remote?
Same thing
@@tayshab80 Not the same process.
My display stayed off most of the time even if i opened and closed the door
What happen if the unlock button don’t work
My car us 2014 Impela made in Canada & this method didn’t work
Hi I don't see the link for the key fob with the proximity.
I did everything you did and now my theft deterrent won't go off and the car won't stay connected to the new key
My key works but my buttons don’t
Does it erase the original fob?
This method will erase the original fob so you will have to program both as stated in the video.
@@AS-pr4ww Mine doesn't go into learning mode. It just says the key fob Numbers then programs a new one after I push the start button. Maybe I have to reach the maximum fobs first. On a 2014 impala ltz that conforms to regulations: 2015 FFV.
🚘🔑
The dang dealer wanted $160 to program the remote, thats more than the remote cost!
PLEASE READ
to exit the pairing mode Hold the engine / Stop button
If not the screens will go black and you’ll think you did something wrong an the car won’t start
My car won’t start after programming
My car not coming on lmao cause internet Ryan prove something
Did this in under 10 minutes on a 2019 impala. Held the brake down , then pushed the start button 5 times. It said ready for remote 1 then I did the second one. After that I held the start button for 12 seconds then it started with the new key
How did you hold down the brake and hit the start button 5 time. The vehicle starts and turn off, start turn off and repeat. Did you miss a step?
Did you figure it out?
@alonzorichardson6961 unprogrammed key remember it won't start . Gotta go through those steps before it will work correctly
I just did this now my car won’t even crank 😭
I would need more information in order to help. Did you try repeating the steps?
Mines doing the same right now
On the new 2018 up need 2 keys in system
Think you a million key fob is working fine thanks again.....
All the videos on this is wrong I’m just going to go to the dealer and pay full price because NO video on UA-cam is accurate
This didn’t work for me at all