hey so I was curious. I see in the pioneer software that you can hold shift and touch a fader to adjust start and finish of it. I was trying to adjust my up faders but when I hold shift and touch em nothing happens. am I missing something?
whaaaaaaaaaaaaaaat? i didn't know there were options for the filter knob and options to change the pioneer effects. this is mind blowing shit. i cant wait to dive deeper into this mixer
Should I buy one? 🤔 Learned mixing on a Pioneer 400's set then switched to an DDJ-SX, and now I'm thinking about to radically change and buy 2 PLX 1000's and an S9 OR an DDJ-SZ2?!
Hey I was hoping to hear the Beat FX being played instead of talking about it and how to change it in the program. Can the preset Beat FX play without the software? I just want to hear them with the song. Please let me know. I would appreciate it.....Sorry I just found it on another video that you did. My apologies.
HI thanx for this great tutorial. I just want to know how do you access to the DJM-S9 setting utility? Do you have to connect the mixer to the computer? Thanx
Thanks for the vid. Do you know how to assign a Serato effect to the main outputs from mixer. On a controller I can assign echo and reverb to the main output and leave it that way for my entire set. With this mixer I can't seem to figure how to do that anymore. The Serato screen on the computer no longer gives that option to assign to main.
I'm pretty sure that you have to activate the effects on each channel by using the paddles... I don't believe there is a way to may ti for the entire master output...
What up bro. Hey, in your opinion, how does this stack up with the Rane 62? If you had an old scool hip hop party and your choice of using this one or the 62, which way would you go.
Since no one has responded to your question, then I will answer it. I've used a Rane 62 multiple times and owned a Rane 61. Now I have the 61 and the s9. Pros for 62: Works with both Serato Scratch Live and Serato DJ (Biggest Benefit) Good Crossfader Great Quality(Rane mixers are workhorses and not only last a long time, but they hold their value) Built in Post Fader Effects Easy Layout Cons for 62 Only 10 pads for cue points vs 16 on the S9 Less customization in the settings than the S9 Echo is sometimes out of sync if you do not tap it out beforehand Pros of S9 Great on board post fader effect(Echo by itself is enough for me to justify buying this over the 62) 16 midi pads for cue points, rolls, slicers, and samplers trigger buttons to lock effects on or just trigger them for 1, 2, 4 beats etc. GREAT crossfader (can adjust pretty much everything about it) Cons of S9 Although quality looks great, there is no proof for longevity Only works with Serato DJ Some people don't like the layout compared to the 62 Overall, I would definitely recommend the S9 and I was always a diehard Rane fan! If you hate Serato DJ and want to stick with Scratch live, then go with the 62.
Do any people in this thread own this mixer? I have noticed a critical flaw in the design and wanted to link up with some of you to see if you can replicate the issue? I can see that in this video its not an issue
hey dude. I'm about to purchase this mixer, and i was curious about the paint issue i hear about on the fader knobs and on the plate next to the cross fader. Can you tell me your experience with that on this mixer? thank you. seems like a great unit.
+Brady Wilson The paint did not peel for me at all, but I had a later model S9 unit where they assured me the issue is now fixed. If the paint peels, then pioneer DJ support will replace it for you...
+Jt Money I like the S9 better because its smaller for two-deck hip-hop and scratching style mixing and I wouldn't need an SP1 for the pad features since they are already on-board. If I was a four deck DJ, then I would get the 900SRT...
+Phil Shonefelt All of the Pioneer Beat FX on the left hand side will work even without any computer connected... But you would want to connect a computer in the beginning to select the effects you want for each button. You can also select the effect by holding the button and selecting the effect without the computer. I should have showed that in the video...
There is a way to do it without the computer, but i forgot... You need to hold the button of the effect you want to change and then click shift and a parameter button of the effect and it will cycle through all the available effects...
+DJ Amity (My'ke the Singer) There's so many out there that I wouldn't really know where to start... Just get the highest processor/memory/storage that you can afford! lol
"Enact" is not the word you're looking for, try "activate" next time. Sorry not trying to be a dick, just want you to communicate as clear and succinct as possible for these tutorials. otherwise awesome video!
Great video! Can't wait for the rest in the series!
+1100000000011 Thanks!
hey so I was curious. I see in the pioneer software that you can hold shift and touch a fader to adjust start and finish of it. I was trying to adjust my up faders but when I hold shift and touch em nothing happens. am I missing something?
Just an awesome looking setup dude, great content as always...
Thanks!
whaaaaaaaaaaaaaaat?
i didn't know there were options for the filter knob and options to change the pioneer effects.
this is mind blowing shit. i cant wait to dive deeper into this mixer
If you scratch at all, the coolest options are the fader settings! You can set this cut in to 0.3 mm, which is insane!!!!!!
I wonder what this mixer is called....
mikeames138
DJM-S9DJM-S9DJM-S9DJM-S9
DJM-S9DJM-S9DJM-S9DJM-S9
DJM-S9DJM-S9DJM-S9DJM-S9
DJM-S9DJM-S9DJM-S9DJM-S9
DJM-S9DJM-S9DJM-S9DJM-S9
DJM-S9DJM-S9DJM-S9DJM-S9
DJM-S9DJM-S9DJM-S9DJM-S9
DJM-S9DJM-S9DJM-S9DJM-S9
Lets play a game,
How many times did he say S9?
djaward 19..
How to use the analyzed bpm for effects. How to put it in auto like Yours? It’s say “auto” on the display how to do it?
how to adjust the echo on the mic
Pioneer needs to put a{ TIME }on the mic echo on the { S9 mixer } an some other adjustment
Should I buy one? 🤔
Learned mixing on a Pioneer 400's set then switched to an DDJ-SX, and now I'm thinking about to radically change and buy 2 PLX 1000's and an S9 OR an DDJ-SZ2?!
The S9 is my favorite! I'd buy one...
I've always found DVS more satisfying. Too much lag on controllers, I can't scratch on them
Hey I was hoping to hear the Beat FX being played instead of talking about it and how to change it in the program. Can the preset Beat FX play without the software? I just want to hear them with the song. Please let me know. I would appreciate it.....Sorry I just found it on another video that you did. My apologies.
anything to do to in some way cancel of the change done and be back to the normal effect ?
HI thanx for this great tutorial. I just want to know how do you access to the DJM-S9 setting utility? Do you have to connect the mixer to the computer? Thanx
Yes, but the mixer is already connected to the computer for Serato Playback...
S7 effects is it the same as the S9 and is the S7 the upgrade
Their effects are similar. I think the S7 may have like 4 more new effects. The S7 is an upgrade but not by much.
@@kareem_the_dream thank you
Not sure why you skipped this step, but how did you access the screen window that allows you to assign different options to the filter knob?
You have to do it in the DJM-S9 utility menu on your computer...
Does anyone know if its possible to use the S9 with rekordbox especially the sample pads with samples from rb?
The S9 is compatible with Rekordbox, but you may have to purchase a subscription for it now.
Thanks for the vid. Do you know how to assign a Serato effect to the main outputs from mixer. On a controller I can assign echo and reverb to the main output and leave it that way for my entire set. With this mixer I can't seem to figure how to do that anymore.
The Serato screen on the computer no longer gives that option to assign to main.
I'm pretty sure that you have to activate the effects on each channel by using the paddles... I don't believe there is a way to may ti for the entire master output...
Could I use this without serato? Would it work if I get a vinyl with samples on it and just go straight to pa speakers/monitors?
Yes it will!
What up bro. Hey, in your opinion, how does this stack up with the Rane 62? If you had an old scool hip hop party and your choice of using this one or the 62, which way would you go.
Since no one has responded to your question, then I will answer it. I've used a Rane 62 multiple times and owned a Rane 61. Now I have the 61 and the s9.
Pros for 62:
Works with both Serato Scratch Live and Serato DJ (Biggest Benefit)
Good Crossfader
Great Quality(Rane mixers are workhorses and not only last a long time, but they hold their value)
Built in Post Fader Effects
Easy Layout
Cons for 62
Only 10 pads for cue points vs 16 on the S9
Less customization in the settings than the S9
Echo is sometimes out of sync if you do not tap it out beforehand
Pros of S9
Great on board post fader effect(Echo by itself is enough for me to justify buying this over the 62)
16 midi pads for cue points, rolls, slicers, and samplers
trigger buttons to lock effects on or just trigger them for 1, 2, 4 beats etc.
GREAT crossfader (can adjust pretty much everything about it)
Cons of S9
Although quality looks great, there is no proof for longevity
Only works with Serato DJ
Some people don't like the layout compared to the 62
Overall, I would definitely recommend the S9 and I was always a diehard Rane fan! If you hate Serato DJ and want to stick with Scratch live, then go with the 62.
Do any people in this thread own this mixer? I have noticed a critical flaw in the design and wanted to link up with some of you to see if you can replicate the issue? I can see that in this video its not an issue
ua-cam.com/video/48rbVS2B4pg/v-deo.html
how active my effect from serato dj kuz when I use serato effect s9 effect stop work and I have tu turn off and turn on back work help please
You can't layer Serato FX on top of the on-board Pioneer DJM Effects... You will be able to do this on the Rane 72...
what version of serato dj is that?
hey dude. I'm about to purchase this mixer, and i was curious about the paint issue i hear about on the fader knobs and on the plate next to the cross fader. Can you tell me your experience with that on this mixer? thank you. seems like a great unit.
+Brady Wilson The paint did not peel for me at all, but I had a later model S9 unit where they assured me the issue is now fixed. If the paint peels, then pioneer DJ support will replace it for you...
+Tre Trizzo I don't know. I put my skin over it already...
Would you use the S9 or the combination of the 900 SRT and the DDJ sp1
+Jt Money I like the S9 better because its smaller for two-deck hip-hop and scratching style mixing and I wouldn't need an SP1 for the pad features since they are already on-board. If I was a four deck DJ, then I would get the 900SRT...
+DJbooth DJ's got you....thanx for the response
How did you get to that white screen where you can change the effects?
On the computer, you go to the S9 Utility program where you can change all types of stuff...
thank you
Are all of he the built in and Serato effects post fader?
C Sanchez
Yea they are
say i want to use original vinyl, the "beat effects" on the left will work without serato / software?
Yes they do...
@@RealDJblaze autobpm assigned?? thanks
How did you get the track to stop playing when you echo out??
Pull the up-fader down
I did the mistake to change that now all my effect are fuck up the echo dont even work anymore I´m pissed off
DJ milton tee 👌📀
what about when the computer isn't connected? how do the effects work then?
+Phil Shonefelt All of the Pioneer Beat FX on the left hand side will work even without any computer connected... But you would want to connect a computer in the beginning to select the effects you want for each button. You can also select the effect by holding the button and selecting the effect without the computer. I should have showed that in the video...
How do you select an effect without a computer connected?
There is a way to do it without the computer, but i forgot... You need to hold the button of the effect you want to change and then click shift and a parameter button of the effect and it will cycle through all the available effects...
+DJbooth DJ's Didn't work. Looks like you can only use the 6 default fx. Thanks anyways.
There's definitely a way... I've seen it in another review...
can you do a video on best dj laptop
+DJ Amity (My'ke the Singer) There's so many out there that I wouldn't really know where to start... Just get the highest processor/memory/storage that you can afford! lol
which one do you use and would recommend
+DJ Amity (My'ke the Singer) Any machine with an i5/i7 intel processor, 8GB RAM and good storage space with SSD drives preferred.
What effect was that on FX2/3??????
+classicdell I don't remember exactly which ones I selected...
That's cool keep up the good work bang out these awesome tutorials man!!!!!!!
Can you add your own effects?
No you can't. Only Serato DJ effects and the internal effects... There are a LOT to choose from though.
"Enact" is not the word you're looking for, try "activate" next time. Sorry not trying to be a dick, just want you to communicate as clear and succinct as possible for these tutorials. otherwise awesome video!