Seus vídeos, seus trabalhos são muito bons... Sua técnica de execução, a produção dos vídeos e principalmente como aprender com os detalhes que são claros.... parabéns....
The biggest problem I found with making doweling jigs is the high precision required in the build because when you use the same jig for opposing joints, any inaccuracy in the jig will be doubled, resulting in misaligned joints. This pair-use jig solves that problem!
very nicely done, I must try making this jig for myself. I noticed the small table saw and several commenters have asked about it. Which saw is it? it looks great, very helpful for small work. Also, I like the music very much, good choice.
Узнаю уже твои видео по рукам и манере движений! Эти видео меня гипнотизируют! Можно узнать в каком городе ты живешь и какая у тебя профессия? I already recognize your videos by hand and manner of movement! These videos are mesmerizing! Can you find out what city you live in and what your profession is? 私はすでにあなたの動画を手と動きの方法で認識しています！ これらのビデオは魅惑的です！ あなたが住んでいる都市と職業を知ることができますか？
Take time making the jigs, they last for a long time, with care, save lots of time too when making right angles for cabinets especially.Great show, Thank you.
Drill the both piece together with a single system = more fast an more precize! Good usual for You mr MMAGIC HANDY MAN isn't it! Thank again, more cheap than the works shop
Does the accuracy of the connection is not affected by a large error 7:05 in the manufacture of the jig? Разве на точность соединения не влияет большая погрешность 7:05 в изготовлении джига?
@@jisakukobo Добрый день! Я с интересом отношусь к вашим видео и с большим уважением - к вашему мастерству. Моё сомнение - не отрицание, а только сомнение. У меня нет такого опыта и практических навыков. Тем не менее, я использовал шканты в несложных домашних работах. Исходя из этого небольшого опыта и школьного курса геометрии (правда, это было очень давно))) я и высказал свои сомнения. Если вы делаете отверстия от руки, без использования стабилизирующего устройства, вы неизбежно получите погрешность (вы получите её даже при использовании различных приспособлений - речь идёт о том, можно ли ею пренебречь, или она повлияет на качество соединения?) Эта погрешность приведёт к тому, что оси отверстий не будут параллельны друг другу и не будут перпендикулярны плоскости базы и заготовки. Остаюсь вашим благодарным зрителем! Good day! I am interested in your video and have great respect for your skills. My doubt is not denial, only doubt. I have no such experience and practical skills. However, I used dowels for simple home jobs. Based on this small experience, and school geometry course (though it was a long time ago))) I expressed my doubts. If you make holes by hand, without the use of a stabilizing device, you will inevitably get an error (you will get it even when using different devices-is it possible to neglect it, or will it affect the quality of the connection?) This error will cause the hole axes not to be parallel to each other and not to be perpendicular to the base and workpiece planes. I remain your grateful audience!
It does not have to be parallel or vertical. It is only necessary that the axes of the two are matched. I can not explain it in Russian. Someone, please give him a description in Russian.
@@jisakukobo Благодарю! Конечно, на родном языке удобней )) Но на эту минуту для меня всё понятно. С вашим аргументом я, конечно, согласен, но он справедлив только по отношению к одному шканту. Если имеем в соединении два шканта и более - они должны быть параллельны. Таково моё заблуждение на данный момент, простите )) Желаю успеха! Thanks! Of course, in my native language is more convenient )) But at this moment everything is clear to me. I agree with your argument, of course, but it is only fair to one shkant. If you are connecting two or more peg - they should be parallel. Such is my misconception at the moment, sorry )) Good luck!
So for t-joining you'd make a dowel jig where the holes are horizontally spaced from the resting guide, instead of vertically thou for more uses instead of it being one jig with 2 holes, make 2 identical jigs with only 1 hole, otherwise you're limited by the width of the boards i.e you had a 15 cm wide board, you'd make a hole guide jig with 5 cm's space between them and if it's 8 mm thick dowels 8,2 cm spacing on either end, but if your next project calls for 12 cm wide boards then that would throw it All out of alignment
I was wondering the same, but it would probably be metric and here in the states we are still behind on weights and measures so I will probably just match a bit to dowel size and tube.
If you find any unauthorized reproduction of the JSK-koubou video, please report it to me.
Thank you.
JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。
Seus vídeos, seus trabalhos são muito bons... Sua técnica de execução, a produção dos vídeos e principalmente como aprender com os detalhes que são claros.... parabéns....
Simple but effective 🙂
د
قطط
世界中の言語が見えます♪息子よりずーっと若い方ですが全ての動画にアイデアが溢れています。加工方法と作り易さと高精度が見てとれます。言葉は要りません。海外の動画はプロのカメラマン？に撮影してもらい自分がスターになった気分で話が多すぎる。この様な動画に興味のある方は見るだけで理解出来るのにと思います。それと安価で出来て特に高級な工作機等は使わない。これが一番かな？いや全てが一番です。
amazing result. you shown a clever way to compensate for not so straight hand drilling. the two pieces fit together perfectly.
Pure skills. I just find It amazing how you drilled those holes almost perfectly perpendicular using only hand held drills.
Jig should be made like this as a pair so the guided holes do not need to be perfectly vertical. this is brilliant.
Great product! I’m going to make one tomorrow. Thank you.
Good you work 👍👍👍👍🥇🌟🌟🌟🌟🌟
字幕で動画の説明をしています。
I explain the video with subtitles.
字幕をONにすると分かりやすいと思います。
I think that it is easy to understand by turning on subtitles.
自作工房 only Japanese subtitles are available. Though the process seems pretty clear so far.
It is in translation, but it will take some time.
For now, please visit youtube for automatic translation.
@@jisakukobo I agree with seth, the video is pretty self explanatory, well done.
Good my brother💖💖💖👌👌🇮🇳🇮🇳
Superb bro, very easy , prevent us wasting money
Amazing joint with amazing jig.
Super.
Великий мастер!!! Приятно смотреть как ты работаешь!
Master, which table circular saw do you use? Proxxon?
私は韓国人です。毎日見ています、本当に周りが端正で、作品が高級にみえますね。私の先生です。日本語が下手のですみません。
The biggest problem I found with making doweling jigs is the high precision required in the build because when you use the same jig for opposing joints, any inaccuracy in the jig will be doubled, resulting in misaligned joints. This pair-use jig solves that problem!
Excellent accuracy and workmanship thank you
Brilliant! What clever engineering, taking advantage of the reference surfaces so the holes always match!
Wonderful. So easy to make. Thank you for sharing.
And i thought i was good but you are brilliant. This actually works despite the error of hand drilling. I couldn,t have thought of it. Congrats...
Awesome! I don't have a drill press and so happy I'll be able to make a dowel jig anyway . Thank you!
Thanks will make them, as the jig I've got is rubbish and been practicing before I wast good wood.
🎓Exellent main frend👌
my greetings from serbia
👍👍👍👍👍👍👍👍👍
very nicely done, I must try making this jig for myself.
I noticed the small table saw and several commenters have asked about it. Which saw is it? it looks great, very helpful for small work.
Also, I like the music very much, good choice.
Buenas tardes me dirias de que tamaño es el tarugo y la varilla que cortaste?, gracias muy bueno el video
Узнаю уже твои видео по рукам и манере движений! Эти видео меня гипнотизируют! Можно узнать в каком городе ты живешь и какая у тебя профессия?
I already recognize your videos by hand and manner of movement! These videos are mesmerizing! Can you find out what city you live in and what your profession is?
私はすでにあなたの動画を手と動きの方法で認識しています！ これらのビデオは魅惑的です！ あなたが住んでいる都市と職業を知ることができますか？
How can we test economic models of the forest sector?
Hola gracias por sus enseñanzas, sencillo fácil y agradable. Saludos desde Colombia.
Very nice video❤❤❤❤
I did it and work perfect. Thx for sharing mate.
What's the musical trailer title plz.
My headaches just left ME.thank you sir.simplicity sensation at best. And freehanded.tip of the hat. El Tejano
love you guys.
What kind of table saw is that?
It's a very nice idea. I like simple technics.
Uma pregunta, si la madera a perforarar hay que hacer una plantilla para cada espesor de madera.
Cuáles son las medidas para hacer la plantilla para los tarugos
I love your videos!
Very good 👍🏼
I made this today. Works Great ! Thankyou !
Take time making the jigs, they last for a long time, with care, save lots of time too when making right angles for cabinets especially.Great show, Thank you.
no muestras las dimensiones de la madera y diametros de perforaciones
What size of a hole?
Alguna con rodamientos 608 de 22 mm?
De que medidas es la madera y los tubos qué largo y que diámetro gracias
Very good idea..
What is the Music trailor name please.
Very good working!
Brilliant!
I also love that fine work little table saw.
Es muy interesante el proyecto pero para mi faltan las medidas gracias.
Je ne vois pas comment utiliser ce gabarit pour le milieu du T ... J'ai loupé une explication?
hi I like youe precise work, what is the double stick tape you are using? you have a link?
Muy buena la idea,pero no veo ninguna medida.trozos de madera,largo y diametros de los tubitos.
Почему не указываете размеры и как использовать вашу работу?
Brilliant first class
Por favor traduza para português também 🙋🏻♀️🇧🇷👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Thanks. Congratulations. Good job
Beautiful Jobwork 💗
guaooo gracias desde mi querida venezuela
It is amazaing! Brilliant idea! Thank you
Louvado seja Deus que te criou e bendito os seios que te alimentaram meu amigo!
Great job
Genious. No need for drill press
You really smart about dowels kit 👏👏👍👍
Drill the both piece together with a single system = more fast an more precize! Good usual for You mr MMAGIC HANDY MAN isn't it! Thank again, more cheap than the works shop
それは すばらしいですね！
comme d'habitude, solutions simple et élégante
Excellent job and video too! thank u
סרטון מעולה ברור וחשוב. המון תודה לך.
Very neatly done and just what I was looking for. Thank you
당신은 훌륭합니다.
donde se puede ver las medidas de las maderas gracias
Does the accuracy of the connection is not affected by a large error 7:05 in the manufacture of the jig?
Разве на точность соединения не влияет большая погрешность 7:05 в изготовлении джига?
Why do you think so?
I am shooting video to prove that it works properly with movies.
Are not you watching a movie?
@@jisakukobo Добрый день! Я с интересом отношусь к вашим видео и с большим уважением - к вашему мастерству. Моё сомнение - не отрицание, а только сомнение. У меня нет такого опыта и практических навыков. Тем не менее, я использовал шканты в несложных домашних работах. Исходя из этого небольшого опыта и школьного курса геометрии (правда, это было очень давно))) я и высказал свои сомнения. Если вы делаете отверстия от руки, без использования стабилизирующего устройства, вы неизбежно получите погрешность (вы получите её даже при использовании различных приспособлений - речь идёт о том, можно ли ею пренебречь, или она повлияет на качество соединения?) Эта погрешность приведёт к тому, что оси отверстий не будут параллельны друг другу и не будут перпендикулярны плоскости базы и заготовки. Остаюсь вашим благодарным зрителем!
Good day! I am interested in your video and have great respect for your skills. My doubt is not denial, only doubt. I have no such experience and practical skills. However, I used dowels for simple home jobs. Based on this small experience, and school geometry course (though it was a long time ago))) I expressed my doubts. If you make holes by hand, without the use of a stabilizing device, you will inevitably get an error (you will get it even when using different devices-is it possible to neglect it, or will it affect the quality of the connection?) This error will cause the hole axes not to be parallel to each other and not to be perpendicular to the base and workpiece planes.
I remain your grateful audience!
It does not have to be parallel or vertical.
It is only necessary that the axes of the two are matched.
I can not explain it in Russian.
Someone, please give him a description in Russian.
@@jisakukobo Благодарю! Конечно, на родном языке удобней )) Но на эту минуту для меня всё понятно.
С вашим аргументом я, конечно, согласен, но он справедлив только по отношению к одному шканту. Если имеем в соединении два шканта и более - они должны быть параллельны. Таково моё заблуждение на данный момент, простите )) Желаю успеха!
Thanks! Of course, in my native language is more convenient )) But at this moment everything is clear to me. I agree with your argument, of course, but it is only fair to one shkant. If you are connecting two or more peg - they should be parallel. Such is my misconception at the moment, sorry )) Good luck!
そうですね。3つ以上のダボがある場合、理論上は平行でなければ入りません。
しかし、（金属ではなく）木材なので、極端にダボが曲がっていない限り入ります。そして、入ってしまえば正確に接合できます。
So for t-joining you'd make a dowel jig where the holes are horizontally spaced from the resting guide, instead of vertically thou for more uses instead of it being one jig with 2 holes, make 2 identical jigs with only 1 hole, otherwise you're limited by the width of the boards i.e you had a 15 cm wide board, you'd make a hole guide jig with 5 cm's space between them and if it's 8 mm thick dowels 8,2 cm spacing on either end, but if your next project calls for 12 cm wide boards then that would throw it All out of alignment
Thanks for publishing it! That's the solution I was looking for! Cheers!
Useful information
Dimensions would be helpful, especially spacing of holes
Gracias por el aporte y vídeo, por fin traductor gracias.......
Really enjoy this video thankyou, it still comes down to how precise I can drill these holes
you don't have to drill these holes perfectly - that's why his solution is such a perfect one.
Thank you for sharing your great expertise
Absolutely brilliant. Thank you.
How can so much perfection fit in one man? Amazing work...México
Me gusta👍👍
Lo bueno es que esta doblado al español
Bravo !!! c'est super *****
Лайк. Отличная задумка👍👍👍
Gostei muito bom
🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷👍 Thanks you my friend
Well presented Video !
excelente idea es de mucha ayuda amigo gracias por el vídeo saludo desde Colombia!!!
Is it for a fixed thickness of each jig ?
動画を見てあーなるほど、そうかその手があったかと感服しました。
頭良いですね。これなら同じようにずれるから結局合ってきますもんね。
もう一つの方法として、角材に穴を開けて中心で2分割に切断する方法もあります。
こちらは少し大きな丸鋸やバンドソーが無いと加工できないので動画にしませんでした。
参考になれば幸いです。
muito legal!!! Parabéns!! Voce poderia passar as medidas e materiais utilidados?
Só saber onde comprar esse caninho!!
That's so clean and accurate wow
Excelente
Gracias por la enseñanza
Как вручную можно просверлить под углом точно 90 градусов?:D Отлично!
very precise finish .thanks tony thomas
Thanks for the subtitles.
diameter of holes drill in wood and diameter of sleeves are same?
excelente!!! saludos desde buenos aires!!
A simple and clever solution. Well done!
I still don't understand how will you get the holes straight without a. Drill press?
Perfectly square is not necessary. Alignment is the most important part and the two blocks are aligned while drilling.
what is the diameter of metal sleeve? Is it stainless steel sleeve?
I was wondering the same, but it would probably be metric and here in the states we are still behind on weights and measures so I will probably just match a bit to dowel size and tube.
8 mm
Just brilliant. Very neatly done and just what I was looking for. Thank you. Subscribed.
Me encantó 👌💯