Thanks brother, I have a 2006 , beautiful condition and having same problem and although I love my truck, having a hard justifying throwing 800 -1000 bucks into for this issue but , I need low beams way more than high beams so , right on , thanks for the help
I was on my way to having my driver side working like the passenger was. I found the power in the harness turned lights off then power and then decided to double check which terminal was hot in the harness and BAMM!!! NO POWER. And now both my high beam or low beam don't work. Need help ASAP as inspection is 2 days away
Got on 07' Dodge, 5.7L (Hemi) and having same issue. Gonna have to try it. Hopefully it works 💪...Will follow up with the results unless the truck blows up..😏
Alls were gunna be using is this CRAP right here! LOL! awesome Dee. I would think why run "1" wire alone- run 3!!!! Cap off drivers wires and run 3 from passengers side to drivers side. You will get high and low beam. just my 2 cent.
My problem is the wires are different colors. My passenger side high beam and low works my drivers side just low beam. Can't figure it out. My rear running drivers side wasn't turning on so I ran 3 wires from the passenger to the drivers side that worked. But still can't figure out the high beam
Did this before I seen your video, worked great the only problem was when using the turn signal it is supposed to shut the headlight off but only did it when turning one direction but oh well, anyway few months down the road, the lights were working intermittently now have stopped completely, no light for low or high beams but running lights work when lights are turned on, completely stumped
My 06 5.7 Hemi has just the left driver side low beam issue. Tried this and it didn’t work. But I’m a little confused cause I checked the power on both sides and they get power. So why else would my low beam on left side not be working with a brand new bulb and power but no low beam light?
My 06 Ram 1500 has the same thing where my driver light is on with low beams and my passenger is on with the high beams. It’s got 361k miles so the tipm is basically junk and half of my stuff doesn’t work lol.
No from what I found relays for headlights are built in to the fuse box / tipm On 2006 and up once the other one fails will have to make separate switch and relays for lights or find someone to rebuild the tipm $$$
Lol 😆 around town yes beer no. it’s my spare truck barley got driven at night but your right it’s a temporary fix that will need to be wired directly to the battery at some point
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
Thanks for the video! Having the same issue with mine and will try this too. Couldn’t justify the cost for that new piece either.
No shop will do the TIPM anyways, guess they don’t want my money. Spent $15 and got it fixed, thanks brother
Thanks brother, I have a 2006 , beautiful condition and having same problem and although I love my truck, having a hard justifying throwing 800 -1000 bucks into for this issue but , I need low beams way more than high beams so , right on , thanks for the help
I was on my way to having my driver side working like the passenger was. I found the power in the harness turned lights off then power and then decided to double check which terminal was hot in the harness and BAMM!!! NO POWER. And now both my high beam or low beam don't work. Need help ASAP as inspection is 2 days away
Got on 07' Dodge, 5.7L (Hemi) and having same issue. Gonna have to try it. Hopefully it works 💪...Will follow up with the results unless the truck blows up..😏
Did it work for you??
Alls were gunna be using is this CRAP right here! LOL! awesome Dee. I would think why run "1" wire alone- run 3!!!! Cap off drivers wires and run 3 from passengers side to drivers side. You will get high and low beam. just my 2 cent.
You can use low beam and high beam if you connect with other switche
That help me a lot because we got the same problem but I already know how can I fix her because you make a great video thanks 👍🏻
My problem is the wires are different colors. My passenger side high beam and low works my drivers side just low beam. Can't figure it out. My rear running drivers side wasn't turning on so I ran 3 wires from the passenger to the drivers side that worked. But still can't figure out the high beam
Did this before I seen your video, worked great the only problem was when using the turn signal it is supposed to shut the headlight off but only did it when turning one direction but oh well, anyway few months down the road, the lights were working intermittently now have stopped completely, no light for low or high beams but running lights work when lights are turned on, completely stumped
Did you check the fuse
Tried this and now both my headlights are not getting power
Same
Did you ever figure out how to get the high beams to work? Both my headlights work but my passengers side hi beam does not.
the wire where the bulb goes isn't making connection on mine if i push one in the bulb turns on how frustrating
My 06 5.7 Hemi has just the left driver side low beam issue. Tried this and it didn’t work. But I’m a little confused cause I checked the power on both sides and they get power. So why else would my low beam on left side not be working with a brand new bulb and power but no low beam light?
your tipm might be dirty and just needs cleaned.
Thanks so much man, worked on my 07 ram 1500 5.7L
Is it still working?
My 06 Ram 1500 has the same thing where my driver light is on with low beams and my passenger is on with the high beams. It’s got 361k miles so the tipm is basically junk and half of my stuff doesn’t work lol.
You are hey genius thank you so much
How to do you tell the side with wire it is
Good brother thank 😊😊😊
I too am having the same issue and don't want to pay. How is your fix holding up?
It’s Still working
Sooo....there wasn't a blown fuse or faulty relay you could've changed out INSTEAD of all this??
No from what I found relays for headlights are built in to the fuse box / tipm On 2006 and up once the other one fails will have to make separate switch and relays for lights or find someone to rebuild the tipm $$$
What if neither headlight is working? Is there still a jumper option
Late to the post, but did you check your ground wires? Otherwise as the vid shows it’s the the TIPM
Does the lamp out message come off on the dash?
I don’t think mine ever went on
I would have just stripped the wires and used duck tape, those blue taps are suspect
What if both low beams are out but the high beams work, how do I fix that?
Exact same problem. I initially did this but now both are out.. new tipm still nothing
Is it not the relay?
Check the grounds,
Whatever you do, don't do this people because one circuit can't handle both headlights and in 2 weeks Both will burn out again
Mine is still working fine so… something you did or have was different probably
if you see a candy apple red 2006 dodge ram at the dealership walk on by, headlights are rigged up on it!!
Not rigged if it works.
😂
It will quit on you its not designed to run two lights , I drive long hours You probably drive around town picking up beer lol
Lol 😆 around town yes beer no. it’s my spare truck barley got driven at night but your right it’s a temporary fix that will need to be wired directly to the battery at some point
Why would you not fix it correctly... smh
Do you know what it takes to fix it correctly?