Kawasaki Z900 2019 Modified to Roar

Поділитися
Вставка
  • Опубліковано 7 лис 2024

КОМЕНТАРІ • 70

  • @Jonathanmoguel
    @Jonathanmoguel 4 роки тому +7

    what a terrible welding job i would definitely not pay for that shit welding job

  • @65mustanggeorge
    @65mustanggeorge Рік тому

    Planning doing this on my bike just don’t want it to be really loud? Keeping stock muffler meaning end can!

  • @josepegas8524
    @josepegas8524 2 роки тому

    Nice sound, do you think it it to loud? Or its on the right point? And does that akrapovic have any dbkiller?

    • @AshWorldd
      @AshWorldd  2 роки тому

      Thank you! Yes it is loud equalant to full system(After market headers). Yes akrapovic has DBkiller but currently not used

  • @blackfalcon6177
    @blackfalcon6177 Рік тому +1

    Why you keep on the catalytic converter? Why not remove ?

  • @MITASuperstar
    @MITASuperstar Рік тому

    if keep catalitic concertele, only cut close to breadbox, is fine without ECU flash ?

    • @AshWorldd
      @AshWorldd  Рік тому

      Yes, it is absolutely fine.. no issues similar experience..

  • @dibyajyotisaha9088
    @dibyajyotisaha9088 Рік тому

    Probably the most unusual comment, but I was interested in the mud flap in the z900 just before the flyby, could you please make short video on the same or tell me where to find that.

    • @AshWorldd
      @AshWorldd  Рік тому +1

      Hi mud flap was ordered in 2019 from aliexpress..

  • @anburajesh1995
    @anburajesh1995 Рік тому

    Hey Brother! Are you getting pops and bangs after removing the catalytic converter?

    • @AshWorldd
      @AshWorldd  Рік тому

      Hi buddy, there is a pop-up/fire back happens but not regularly with my way of riding, it depends on the rider way of riding the motorcycle with too many acceleration or de-acceleration...

  • @slow.motion.therapy
    @slow.motion.therapy Рік тому

    hi Bro, I have a z900 in Bangalore. Need your help to remove muffler chamber and cat converter as well. Can you help me get it done?

    • @AshWorldd
      @AshWorldd  Рік тому

      Hi Rohan, sure I can help but currently am outside India will be back in Oct.

  • @mikv3752
    @mikv3752 3 роки тому +1

    Cool. Did you face any loss in power or any low rpm.issues etc its absolutely as powerful as the stock one in complete rpm range.
    Any other issues faced ?
    Cheers and thanks.

    • @AshWorldd
      @AshWorldd  3 роки тому +1

      Hi Mate, after modification till date all fine, no power loss or low rpm issue absolutely going strong with regular maintenance in kawasaki service center.

    • @mikv3752
      @mikv3752 3 роки тому

      @@AshWorldd thank you, I am convinced now, but this can void warranty for sure :).

    • @AshWorldd
      @AshWorldd  3 роки тому +1

      @@mikv3752 yes, but company won't give warranty for exhaust or header, its only for electronics and engine parts. Insurance will cover everything not to worry.

  • @gabkalderon
    @gabkalderon 3 роки тому +1

    I was thinking about doing this. Does it affects performance in any way?

    • @AshWorldd
      @AshWorldd  3 роки тому

      No changing in engine performance, but definitely increases the sound performance 🙂

    • @kumaresans1089
      @kumaresans1089 3 роки тому

      No. That's replica bendpipe it will affect the engine

    • @claudiovariedadeeletronica2128
      @claudiovariedadeeletronica2128 11 місяців тому

      ​@@kumaresans1089 como assim isso prejudica a moto ?

  • @josefrancis9873
    @josefrancis9873 5 років тому +1

    Lots of videos. Keep it going.

    • @AshWorldd
      @AshWorldd  5 років тому

      😀 few more to come

  • @GordonThelander
    @GordonThelander Рік тому +1

    Some of the worst quality welding I have ever seen!

    • @AshWorldd
      @AshWorldd  Рік тому

      😀 Am glad to see the comments, yes it in not complaining to the standards but the same welding going strong till date, no issues!

  • @VENKVIEWS
    @VENKVIEWS 3 роки тому +1

    Bro do you get flame thrower in exhaust while downshifting

    • @AshWorldd
      @AshWorldd  3 роки тому +1

      Very rarely I have seen flame, only if the vehicle is in higher rmp for longer duration then fire would visible. Currently I'm going for short rides only..

    • @VENKVIEWS
      @VENKVIEWS 3 роки тому +1

      @@AshWorldd 😍

  • @carlclimaco5723
    @carlclimaco5723 2 роки тому

    No need to reflash the ecu? After cutting the bread box?

    • @AshWorldd
      @AshWorldd  2 роки тому

      No not required, it is absolutely running fine from 4years....

    • @ianjaya5237
      @ianjaya5237 Рік тому

      Reflash ECU only if u modified the machine bro, exhaust has nothing to do with ECU.

    • @RexMuffin
      @RexMuffin Рік тому

      ​@@ianjaya5237 Yes it does. A full system requires an ecu remap as the engine will run too rich.

  • @gouthamgot8256
    @gouthamgot8256 3 роки тому +1

    Where is the shop that made it ?

    • @AshWorldd
      @AshWorldd  3 роки тому

      Where do you stay in Bangalore?

  • @Namengihun
    @Namengihun 3 роки тому

    Sir what if we remove the cat? Will there be any changes?

    • @AshWorldd
      @AshWorldd  3 роки тому +1

      I would suggest keep the catalytic converter, to protect environment. If your purpose of the modification is to make you motorcycle sound loud, then just eliminate muffler chamber add mid pipe enjoy the sound, if need more sound than buy any aftermarket slip on exhaust it will roar.

  • @moyanak
    @moyanak 2 роки тому

    Bro how's the fuel consumption afterwards?

    • @AshWorldd
      @AshWorldd  2 роки тому

      No difference as per my experience on this motorcycle... but it always depends on rider way of riding the motorcycle

  • @durgeshnagaraj7863
    @durgeshnagaraj7863 3 роки тому

    Sir , Do cops stop/catch you for the exhaust’s ?

    • @AshWorldd
      @AshWorldd  3 роки тому +1

      It depends on rider, I never rev the bike while riding on main junctions/ busy traffic/police check post. Always try to keep 3000rmp on 3rd gear, this combination will not roar. So I never got fined till date for exhaust, plus I follow basic rules like standard IND number plate, emission test, RC, wearing riding gear, insurance, no pillion rider, speed limit and maintaining traffic lane rules. These are the basic things where cops looking most of the time.

    • @durgeshnagaraj7863
      @durgeshnagaraj7863 3 роки тому

      Oh okay sir , because these days the bangalore cops have become a pain.

  • @sandeepramesh
    @sandeepramesh 5 років тому

    Hey bud, where did you get this done in Bengaluru?

    • @AshWorldd
      @AshWorldd  5 років тому +1

      Hey mate, I have pinged you my no.on Instagram messenger. Plz connect me I will help you to get it done.

    • @the10rrider96
      @the10rrider96 4 роки тому

      I want get it done the same

    • @the10rrider96
      @the10rrider96 4 роки тому

      @@AshWorldd from were did got this done can you share the details

    • @AshokKumar-us1kc
      @AshokKumar-us1kc 4 роки тому

      Where in banglore I want to do same to my bike

  • @sharryglobetrotter5623
    @sharryglobetrotter5623 4 роки тому

    is the sound much louder?

    • @AshWorldd
      @AshWorldd  4 роки тому

      Yes it is loud, now it is completely free flow like full system

    • @bleak0218
      @bleak0218 Рік тому

      @@AshWorldd Completely free is it with decat.

  • @KapilYadav-oi9zt
    @KapilYadav-oi9zt 3 роки тому

    Bro does this prevents backfire ??

    • @AshWorldd
      @AshWorldd  3 роки тому +1

      Only the stock can prevent the backfire because it has double barrel bend pipe inside but straight exhaust will not stop backfire, but this modification is not going to make big loud pop up sound (because catalytic convertor still inside, eliminated only muffler chamber) but slightly small pop-ups would be there, that we need to leave with it

    • @KapilYadav-oi9zt
      @KapilYadav-oi9zt 3 роки тому

      @@AshWorldd got it bro,irritated with loud crackles from my full system on z900.

    • @corvette114
      @corvette114 2 роки тому

      @@KapilYadav-oi9zt that's because you need to tune it

  • @morvy187
    @morvy187 4 роки тому

    no any tune required ?

    • @AshWorldd
      @AshWorldd  4 роки тому +1

      No not required, till date I have ridden 8000kms after modification.
      Required only if you are going for track race or drag race

  • @trevorelger1620
    @trevorelger1620 2 роки тому +4

    What a mess.

  • @joseramrez_
    @joseramrez_ 10 місяців тому +1

    Poor bike.

  • @ayushkumre9999
    @ayushkumre9999 5 років тому

    Where to get that decat pipe ?

    • @AshWorldd
      @AshWorldd  5 років тому

      Hey buddy where do you stay?

    • @AshWorldd
      @AshWorldd  5 років тому +1

      @@billyh8020 hey buddy thanks for sharing the link.. it's good but this pipe does not have holder clamp, where it gets fitted with bolt and nut to chassis. It is a straight connect without any firm hold in-between. Not recommended

  • @davidantoniojunior6281
    @davidantoniojunior6281 5 років тому +1

    Usou diametro menor do tubo e ainda soldou com eletrodo no inox kkkkk