Great Job on the video. I finished installing new motor on SuperFlo pump and simply followed your instructions, step by step. No issues. The new pump is back on with Pentair Quick Kit parts and running smooth. Thanks.
Awesome pool guy said meh just buy a new but at 1200 bucks I figure a 30 kit and this video I had to try. And it works perfectly I have a perfect seal with no leaking and no air in the pump at all. Great video
This video is very helpful! Thank you. But, next time when you upload a video on how to do like this you need to list tools and equipment you are using. If you could add a link where to purchase the seals that will make even better. You need more professional working people in marketing! It has been known famously bad customer service reputation. But an excellent engineering team!
Good video. Question - I have a superflo VS pump that is only 2 years old. It has started running much louder recently. Could a bad shaft seal cause that? I'm looking for ideas of what could be the issue before I either take it apart or hire someone to look at it. Thanks
My Super Flo pump with "top" on the seal plate positioned at top of pump the Diffuser tab sets about at 3 o'clock. Was there a change in the position of the tab to the seal plate? Update even though my diffuser was positioned at a different configuration I installed as you mentioned in your video.
I FOLLOWED THIS PROCEDURE, AND AFTER FINISHED PUTTING THE MOTOR BACK TOGETHER, IT HAD NO SUCTION, COULD THE PROBLEM BE THAT I PUT THE L 1, AND L 2 WIRES REVERSE ? ,
General question on Pentair pump seals. Why different seals for Whisper and inteili-Flo vs SuperFlo. Wouldn't on seal make everything easier and cheaper for Pentair and also Sta-rite and other brands Pentair owns.
Gah! The part I need to see is how to get the lid out of the clamp (the clear part out of the part with the handles). The video skips right over that part when removing it and when replacing it!
I am sure you have figured out by now, so maybe will help others. On mine the clear top was stuck and not loose, a light tap downward with rubber mallet broke the clear lid free. Once free, it will not come straight out. Holding the assembly upside down angle it in the ring and push low side into corner of the ring. This will allow the upper side to pass the locking wings on ring and slide out.
Followed your instructions and now living happily ever after! Thanks!
Great Job on the video. I finished installing new motor on SuperFlo pump and simply followed your instructions, step by step. No issues. The new pump is back on with Pentair Quick Kit parts and running smooth. Thanks.
I just ordered a Pentair repair kit, and I will be doing this procedure on my SuperFlo pump soon.
Thanks for the detailed video!
Hi, it is hard to find the place (can’t find it from Amazon) to buy this kit. Can you please post the link for me?
Awesome pool guy said meh just buy a new but at 1200 bucks I figure a 30 kit and this video I had to try. And it works perfectly I have a perfect seal with no leaking and no air in the pump at all. Great video
This video is very helpful! Thank you. But, next time when you upload a video on how to do like this you need to list tools and equipment you are using. If you could add a link where to purchase the seals that will make even better. You need more professional working people in marketing! It has been known famously bad customer service reputation. But an excellent engineering team!
Great instruction .. thanks
Good video.
Question - I have a superflo VS pump that is only 2 years old. It has started running much louder recently. Could a bad shaft seal cause that? I'm looking for ideas of what could be the issue before I either take it apart or hire someone to look at it.
Thanks
My Super Flo pump with "top" on the seal plate positioned at top of pump the Diffuser tab sets about at 3 o'clock. Was there a change in the position of the tab to the seal plate? Update even though my diffuser was positioned at a different configuration I installed as you mentioned in your video.
I FOLLOWED THIS PROCEDURE, AND AFTER FINISHED PUTTING THE MOTOR BACK TOGETHER, IT HAD NO SUCTION, COULD THE PROBLEM BE THAT I PUT THE L 1, AND L 2 WIRES REVERSE ? ,
hello, great vide very helpful! im just wondering wahts the quick kit part number? 'ive tried to search in the web without luck, thanks in advance.
Very helpful, thanks.
Great video!
Good video but when I got it all back together the shaft turns very hard to the point that the motor won't start. Any idea what I did wrong?
@Terry Cook DID YOU EVER FIND THE PROBLEM ? I HAVE NO SUCTION AFTER I PUT EVERYTHING BACK.
General question on Pentair pump seals. Why different seals for Whisper and inteili-Flo vs SuperFlo. Wouldn't on seal make everything easier and cheaper for Pentair and also Sta-rite and other brands Pentair owns.
Why so many extra screws?? Hayward pumps run fine without all the extra screws in the diffuser and impeller...
Gah! The part I need to see is how to get the lid out of the clamp (the clear part out of the part with the handles). The video skips right over that part when removing it and when replacing it!
I am sure you have figured out by now, so maybe will help others. On mine the clear top was stuck and not loose, a light tap downward with rubber mallet broke the clear lid free. Once free, it will not come straight out. Holding the assembly upside down angle it in the ring and push low side into corner of the ring. This will allow the upper side to pass the locking wings on ring and slide out.