To support this channel, joining a Udemy course and leaving positive feedback will be helpful for me. www.udemy.com/course/proxmox-virtualization-environment-complete-training/?referralCode=8E7EAFD11C2389F89C11
Hello, Thanks for the informative video I am considering installing pfsense on my office network where I will host several websites on my server. Shall I virtualise pfsense or use an old pc? Thanks
Thanks for such great video series . I need help as after assigning Ip t WAN 192.168.1.100 WAN and 192.168.240.1 LAN I cant acess pfsesne interface . However when reset to factory defaults I can access 192.168.1.1 from other VM in proxmox . Not sure whats wrong with it any help please thanks . My gateway is 192.168.254.1. VM attched to vmbr1
@@syncbricks Thanks can you please suggest as VM is on 192.168.204. 6 addrress different subnet so how do I achieve that thanks vtnet0 WAN 192.168.1.1/24 and LAN vtnet1 192.168.204.1/24
Hello, what's up? I have a server running Proxmox and I put pfSense on it, I put 4 network interfaces, one associated with the host's physical port which is the WAN and the other 3 bridges for different subnets, I created the routes for the lanes on my router pointing to Proxmox and the traffic goes right to the subnets, but there's a damned asymmetry in the firewall that I've already hit everything and couldn't solve lol, disabling the firewall functions, pfSense acts only as a router and DHCP server, I can access all the subnets normally from my local network. Do you have any idea how to solve this problem? Thank you very much in advance.
To support this channel, joining a Udemy course and leaving positive feedback will be helpful for me. www.udemy.com/course/proxmox-virtualization-environment-complete-training/?referralCode=8E7EAFD11C2389F89C11
Hello,
Thanks for the informative video
I am considering installing pfsense on my office network where I will host several websites on my server. Shall I virtualise pfsense or use an old pc?
Thanks
If your Hypervisor is using a good hardware then use vm otherwise dedicated hardware is a good choice
@@syncbricks thanks for the reply 🙂
i need your help with this .. can figure out the issue i have
Can you mention the issue I shall help you om this
Thanks for such great video series . I need help as after assigning Ip t WAN 192.168.1.100 WAN and 192.168.240.1 LAN I cant acess pfsesne interface . However when reset to factory defaults I can access 192.168.1.1 from other VM in proxmox . Not sure whats wrong with it any help please thanks . My gateway is 192.168.254.1. VM attched to vmbr1
You need to change ip address of your vm as well else you have to Change dhcp range also in pfsense
@@syncbricks Thanks can you please suggest as VM is on 192.168.204. 6 addrress different subnet so how do I achieve that thanks vtnet0 WAN 192.168.1.1/24 and LAN vtnet1 192.168.204.1/24
Brother, I am not able to find the next part of this video can you please share the link
pfSense: Network Security and Firewall Management
ua-cam.com/play/PLIj_IdEl38Zs0f7cIDhpXlkgS0RYWyH_8.html
@@syncbricks Bro when click the link It says the video is unavailable or hidden
Hi, good job. Just one comment.
This is a tutorial! Your steps must be slower. Give us from 2 to 3 seconds after each move.
Thanks for tutorial.
Sure will follow next time
Is it possible to do this with just one nic?
Yes it is possible
Yes but you have to have only one DHCP on same LAN
Hello, what's up?
I have a server running Proxmox and I put pfSense on it, I put 4 network interfaces, one associated with the host's physical port which is the WAN and the other 3 bridges for different subnets, I created the routes for the lanes on my router pointing to Proxmox and the traffic goes right to the subnets, but there's a damned asymmetry in the firewall that I've already hit everything and couldn't solve lol, disabling the firewall functions, pfSense acts only as a router and DHCP server, I can access all the subnets normally from my local network.
Do you have any idea how to solve this problem? Thank you very much in advance.
Hi
Yes the problem can be solved
pfSense is built on FreeBSD not linux
Yes