New Knives for the Week of May 16th, 2024 Just In at KnifeCenter.com
Вставка
- Опубліковано 6 чер 2024
- Demko has gone international with is venerable AD20 with Italian-made blades. Plus, new Jack Wolf Knives drop tomorrow, and we’ve got EDCs from MKM, CJRB and GiantMouse. Check out the latest knives and EDC gear from KnifeCenter here: kcoti.com/3WKty8T
The availability of custom and sprint run knives are often limited to stock on hand. Check the links below for the latest availability and prices.
Featured Knives
00:00 Intro
00:15 Demko AD20i Exclusive Release: kcoti.com/4aqBBLl
03:01 MKM Vincent: kcoti.com/3yq8n1N
05:01 MKM Eclipse: kcoti.com/4by1ERS
07:17 GiantMouse ACE Biblio XL: kcoti.com/3ynCuXA
09:48 Jack Wolf Mini Cyborg Jack (Available Friday, 5/17/2024): kcoti.com/3V3c8mE
12:34 Mikov Kosta: kcoti.com/4dFVTTP
14:49 CJRB Chip: kcoti.com/3V3Vzaj
16:39 CJRB Pyrite Bowie: kcoti.com/3V2fIgI
18:35 Leatherman Skeletool CX and KB: kcoti.com/4dHtIE4
20:42 Olight Otacle D2: kcoti.com/3UHwbpn
22:44 Toor Forloh Merlin: kcoti.com/4bkvdGJ
24:34 Toor Avalon: kcoti.com/4bl7032
26:16 MKM Prima Kitchen Knives: kcoti.com/4brxxvK
Slightly Larger that Average Patches: kcoti.com/3IXcovQ
Need a Tek-Lok? Get them here: kcoti.com/2MaMxqJ
#NewKnives #KnifeCenter
Social Links:
/ knifecenter
/ knifecenter
/ knifecenter
Sign up for our newsletter:
kcoti.com/2LkuXg7
Check out our KnifeREWARDS program for free money to spend on your next knife: kcoti.com/knifeREWARDS
Browse our full catalog:
kcoti.com/KnifeCenter - Навчання та стиль
We want to hear the blades while you open and close them
That's my error. I didn't realize I had that audio channel muted when I rendered out the video. --Thomas
@@knifecenter Loosing your touch mate. Old age creeping in...!!
The people that wanna hear The Miz's entrance theme music too
Can we get a video on the top 10 most expensive knives in the store?
Im amazed by both the thought of turning the pocketclip into a tool but sighed when it was a bottle opener. Im wondering how many other places we can add a bottle opener too.
Great set of kitchen tools, might just have to get a couple. Cheers Seth & Thomas from Australia.
Can’t believe the Demkos are still sitting there. If I hadn’t just bought the knifejoy strider drop and a project x I would grab one. Meanwhile this all happened while I was at the omega boutique in Tampa. It was a rough day on the wallet
Dear @knifecenter . Just to rise my voice for our neighbor Czech knife makers and their language, the correct name of the knife is Mikov "Kostka". That's also how the Czech word for cube is written. I have no idea how to properly phonetically transcribe it for English speaking folks, but Google Translate can say it properly :-)
Very insightful commentary Seth!
Hey guys, although I do love to watch the new knife of the week, I would like to see yall change it up every now and then and do a new flashlight of the week.
Do they make "clear" ultem / NOT yellow?
If ya'll ever do a "Top knives that'll get you sent to the emergency room" list that Mikov Kosta is gonna be top 5 for sure.
I'm loving all the Seth videos! Keep 'em coming!
Ad-20 Handle should have been made in Italy, their heat treats for blades are usually on the softer side
Whats the knife that looks like a camera? I forgot its name. It was in a previous video. Cant find it.
They need to make a pyrite Bowie XL
That blade shape is HIDEOUS. They should make an Ekko XL or an Alt-Pyrite XL but not that fugly thing.
Ok
@@DB.KOOPER I’m with you
I know a lot of people like it cause it’s different
But it just does not work as a pocket knife look 😂😂
I just want a XL Pyrite in titanium
Nice job. I still think an easy thing to do that would be very helpful would be to see what it looks like in a pocket. Even if that means bring a piece of cardboard and sliding it on that. Great content though!
My continuing desperation for a Vosteed Hedgehog but I kinda enjoy these Pavlovian unrests while DCA is on paternity leave, that's the thing about Seth is that he helps folks deal with fear of change
I'm use to hearing the price on all the knives. Seth you're missing several. That makes me go to the site to check them, was that your plan?
Everything's a conspiracy - that's the spirit !
😂😂
Ordered one of the 20i’s for my 5th AD20. This one will be my dedicated user. Good opportunity here for people who want an AD20. I know some people only want American production but honestly Italy is fine with me especially because the CPM 20CV is still American steel
So if you go to Italy with your wife or girlfriend, are you gonna let a bunch of Italians put their hands all over her and grind and shape her? Heck No! So same should be done for your blade steel.
$425 for is really great. I got an AD20S , diamond texture Ti handles , S20V at the NYCKS at the end of March. They were a brand new batch from custom shop which is what I wanted BUT , it was $650.
Probably could pick up that one , swap out the scales and still come in under what I paid. You live , you learn, lol
Doing a terrific job Seth!!
Tell DCA to do an exclusive pocket tango with jigbone handles! Gimme gimme!
DCA doesn't do these videos anymore
"Drop-Muk"? DCA is gonna strangle you guys when he gets back. Lol.
Lol
My Bday is May20!! All I want is an AD20i
Was hoping you were gonna drop the vosteed psyop's. Maybe next week, keeping fingers crossed.
Great job Seth! Love your insight. Been killing it while Slightly Larger Than Average is on his well deserved vacation!
425 bucks?!? Bro.... I can't wait for civivi to come out with more models with their back locking system. The price for that demko is absolutely silly...
It's like 3/4s of an inch bigger than the ad20.5 so it is like double the price. These people really have 0 respect for the customers' intelligence
My knucklehead brother says stuff like "that's the universe telling you to go make more money"
it's a "real" Demko, man. Anytime you step up to custom or semi-custom pocketknives this (400ish) is going to be the starting point. Not to mention he's the hottest knifemaker on the planet for the last 5 or so years. I'd buy one in a heartbeat if my wife would let me :)
The fully USA made demko ad20 is possibly the best locking cutting tool in the world. Demko is the godfather of locking knives
Everything changes when it's made in USA. Weather it's parts ,assembly, custom that made in USA doubles the price everytime
“And worst of all, he could be any one of us.”
Hey where's DCA?
Eclipse is a nice knife. But at that price point I’ll wait for the lefty-friendly button lock.
So the aluminum Olight bit driver ($40) is almost half the weight and half the price of the Titanium version. I’ll go with the lighter version all day long.
A little extra weight for much more life. Your decision making skills could use some improvement
1:05 what is the heat treat of the steel?!?!?
I’d assume they are heat treated in Italy. Which the major Italian OEMs are known for terrible heat treatment.
What's the HRC on the Italian made 20CV Demko blades? Italy scares me, they like it soft.
No, that is a myth started by some UA-cam knife influencers some time back. They don’t have instruments to measure it nor do they get proportionate sample size. And they somehow think doing amateur reviews of knifes makes them smarter than the Italians who have been making knives for over 150 years. If you go to Demko’s site where he talks about the HRC ranges. Like Spyderco he doesn’t post the HRC.
@@davidgarrett5671 The Italians sometimes advertise their targeted HRCs. The Maniago manufacturers like running high-carbide steels like 20CV and M390 softer than I'd prefer. This isn't missing their target, its hitting a target that cuts their abrasives (and maybe warranty) costs. Running soft makes sense on something like the Demkos, which don't have slicey geometries. Differerent strokes.
Personally, I like more moderate carbide steels (with more intrinsic toughness) (like S35 or CPM-154) in thinner geometries run hard, as that permits reprofiling to more acute edge angles, while retaining edge stability.
We really need to see the flex (or not) on any filet knife review.
Cube is sold out 😭😭😭😭 More uniqueness like that please! 💜💜💜
is the Costa viewed as a Balisong/ switch blade for legal-ish definitions? asking for a friend.....
If that chip is ever on sale for $25 I’ll buy a couple of them.
Where’s DCA?
Just on a break. He'll be back before you know it
@@MarkRVillanoNot really anyone's business either.
Damn!!!! DCA is having some serious personal issues rn!
@@MarkRVillanoYou go for all the conspiracy theories on the web, right? They have mentioned that he is off.
@@MarkRVillano He's on paternity leave. DCA said that himself in a reply to a comment a few days ago asking about his whereabouts.
So many Italian knives I want. But unless it's n690 I'm not buying... Ive had 12 different pm steels from Italy and there all soft. Maybe things have changed over the last year but I'm not betting my money on it... One exception. The loon spy with m390 was heat treated well... But that's the only one
I'll wait for DCA😂
What is that CJRB Chip, a free sample?
Yeah, its a stupid way to increase profit margin, pretty useless knife, i'd rather carry any of my Swiss Army knives over that.
Honestly
Asking more then 20$ is a crime
The material used is 1/2 of the material needed for a pocket knife
And with nothing else going into it other then an inlay
They should give you one of these any time you buy a 200$+ Artisan cutlery knife
@@bornonthebattlefront4883 lets bring this comment to top comment. I like the chip, love tiny small minature knives. Hopefully theyll bring it down. Or gift like you said.
Mikov Kostka, you omitted K. :)
I do the same thing with Mark Dacascos except I also purposely mix it up with Mike Dukakis
Where has DCA been??
Paternity leave, apparently
You're forgetting to say the price of the knives
That Mikov looks seriously cool for idc... Please have this made in a more premium steel... 154CM would. be nice.
I think demko miss calculated what the ad20 is to their fans it’s an American made knife and blade. It’s their knife if they want to add an Italian made blade that’s fine but I seen multiple people in the knife community stop and think about it. Mostly because it’s not gonna have that scalper value the American made knife’s have.
425 bucks is grossly overpriced anyway. No way in hell would I pay that much for a knife that's only half American made....
that's my concern exactly. Still, I think a lot of people are going to scoop these up after watching the video. Demko just knows how to design chunky beauties. That black G-10 looks especially good, imo
Italians seem to like their steel al dente - just a little soft.
You say that like someone who reads blade forums and watches UA-cam videos but doesn't actually do research to find actual testing. It's super easy. Only a couple minutes. Also your joke sucked
Mikov Kosta is out of stock already?
Wish they had a notify me by email or text. Its a knife that id buy right now. Its like the aga campolin.
Seth is the guy that has 15 minute presentation that takes 3 hours
I like jack wolf knives but I can’t. I need a second job. Maybe one day
Seth just coined a new word! "Cubular".
man I'd LOVE to get another AD20, the only problem? *your website doesn't accept my payments* like, I've called yall on the phone, called my bank, tried 4 times and still won't let me in. if you would at LEAST accept paypal or something similar I am positive your sales would skyrocket because I know i'm not the only one with this problem. (if I was, the stuff you guys have wouldn't still be in stock)
👍
This is like throwing a party when the parents aren't home. Let's start talking about how "fingersafeness" doesn't actually matter, we all have slightly larger than average hands, and there are only 3 people who need a fixed blade outside of the kitchen.
Do pirate swords rust very easily?
Looks like the search continues.
$37 for a "Chip" of steel?
The steel choice killed that AD20 for me. 20CV is great steel but not my favorite. The harpoon Magnacut version is where my heart is
4:54 kinda looks like a crkt piet( also voxnes design) if it took steroids... I said" kinda " y'all dont go freaking out on me now. But im not wrong hahaha. PEACE
where has david anderson been?
Paternity leave, apparently
im glad demko hasnt fully bought into that ridiculous deep carry pocket clips which make it harder to present the blade with any speed.
Great vid can’t wait to watch it I’m ur number one fsn
My biggest problem with the ad20i is it's the same price as one made by the Demko's which is better fit and finish. Just no.
Why aren't you posting on TV anymore?
Huh? -DCA
Is anyone else tired of them putting bottle openers on everything? When was the last time you had to open a bottle that wasn't a twist top?
No. Today, when I opened a beer. Cry harder and louder about it, they might listen
Found the 12 year old
Mikov Kosta does not mean cube actually. Kosta means nothing in Czech ;) its actual name is Kostka tho, which is cube :D so you guys have a wrong name presented i think
If Benchmade made a similar knife to the Demko and charged that price, the comment section would literally be 200 comments of people crying about it. Just have some consistency people. Demko are alright.
How are knives ..."sitting"... in front of him? Why not standing?
We want David C Anderson back
Is he on a vacation??
@@oldschoolfreak98not sure
@@oldschoolfreak98 YES
Seth has anyone ever told you that you look
Like a 70’s movie star and David looks just like shrek.
Shrek? 😂 I want what you're smoking
That AD20i is way overpriced. Heck if Microtech can make aluminum handle knives for under $300 asking with Tactile with their new Chupacabra with a great lock and Magnacut for $250 all USA made surely Demko can
How does he have this much vacation? Tell the truth. What did you do with DCA?
What the hell .... What happened to Dave..😢
He’s just on paternity leave, apparently
What's this use of the word "platform"...are we in a train station? sounds like a buzzword to me.
Model, Design, Version, Variant, Iteration.
Knife, Item, One, name of the model...
calling that MKM a gyuto is a misrepresentation. that is not a gyuto, not really even close
Where is DCA??!?!?!?
Paternity leave apparently
"Lefties, you're going to have to adapt." We know....we know....
Born a lefty, but got that corrected at a young age. Now im trying to be ambidextrous. Its quite difficult now.
I don’t trust cjrb
Anybody else getting tired and burnt out on the "modern folder" knife? Especially the ones with "super steels" that are hard to sharpen and priced to the moon. Then there's this Jack Wolf that does "modern traditional" lol, no thanks, I think Case has tried a take on this modern traditional knife also.
So what do you want to see in your 52 episodes a year of new knives this week? What are you hoping for?
@@mrdoughface I want more unpractical futuristic, spacecraft looking, with ridiculous blade shapes that cost an arm and leg. Is that so much to ask?
??? 🎉🎉🎉😢😢😢
I’m sorry but you aren’t going to get good performance from Italian Magnacut lmao
Yes, keep spreading his BS based on … nothing. Really weird that in over 150 years Italian can’t do heat treat and 10 year UA-cam influencers with no equipment and few samples can criticize it.
FALSE
Why have u removed the audio of the knives opening and closing?
U think we want to hear the dancing squirrel?
Walk n talk, baby!!!
That was my error. I mistakenly had that channel muted when all was said and done. --Thomas
@knifecenter lol 😆 all good n the hood. I know the big bad wolf doesn't get littIle red.
BUT ..... I still like to hear the story. Ya know what I'm saying?
@@JackG79 the hood? What are you a wannabe rapper?
@@melchior2678 wanna be rapper? What are u? A wanna be tough guy?
I’m also first like
And comment
I hate the slot they put in the blade ugly
Things that need to go away in the knife world: Benchmade, The James Brand, Chi-com XcrXmov steels, Frame-locks, liner-locks, flipper tabs that don't hide when the baldes deployed, knives without and hipsters who think talking about knives online and fidgeting with them is the same thing as using them in the field.
Screw demko and him starting to go the benchmade route. It’s unbelievably insulting for the guys to keep slapping us in the face in the USA. God willing people will quit buying their stupid overpriced BS starting with knifecenter. Kissing butt to the spitting I your face companies. Not that it matters but I’ll be going elsewhere.
Man this really sucks. I love the look of that Pyrite with the Bowie blade. But Artisan Cutlery and CJRB can go pound sand. Until they acknowledge or remedy their AR-RPM9 lies, half truths or vagaries about their “Powder” steel. I actually made past purchases with them over another brand. Because I weighed the supposed advantage of their ‘powder” steel in their favor. Plus they never corrected anyone presenting knives for sale who mentioned it as such. Shot Show, Blade Show, every interview perpetuating a falsehood. They won’t get a dime from me again. Word to the wise for UA-cam Salesmen. Don’t continue pushing their bad information. You lose your customers trust and you won’t have the benefit of the doubt, or their continued business. Just my .02
They posted about it on Instagram
Aye, and that Instagram post addresses the issue honestly and handily. Worth checking it out.
worst review...so far.
Is it just me or jas the level of innovation become really lacking? The only time we really see anything really cool or new their hyper expensive custom production knives.
Where is DCA? He is the best and is animated where Seth is OK as long as you enjoy watching paint dry. I understand that it's not easy making videos but he just seems a bit pretentious, like he should be working in a coffee shop. Too bad everyone likes to ruin things that work. I used to enjoy Thursday new knife days but not anymore. Nice job knife center.
i bet you hated airbags when they 1st came out too.
We all like DCA but he is on vacation so calm down there Karen. He will return.
MKM.Mikov.GM…が好きです。