Ive used the Dx2, Dx351, GX120, GX2, GX3, and the BX3 Bx3 is by far the best out of the lot. The gas guns stop running in low temps where the Bx3 will keep working (-30c) The pin hold is amazing...1-2 misses in an entire mag. The only downside to the Bx3 is that you cannot rapid fire as the piston needs to wind up in between shots
@bryanhearn9924 Correct me if I am wrong, but the gas cartridge only leaks (slowly) when in the machine, because it pushes the cartridge valve in, right? Disengaging the cartridge from the machine, so taking it out when not in use, should stop the leak. Works a treat in Paslode, guess it should work in this Hilti too, right?
Im not sure what they cost at the moment, but i think they are over $1000 cdn. you should also check out the dewalt version. it's just as good but does not require any fuel, so it's cheaper to run
I use these guns everyday at work sometimes they work okay have a hard time getting a three-quarter inch pin to hold in concrete the half inch pins hold great in the steel but get a ton of misfires with it especially when you're in an awkward position they are nice when they're working good but they're really crappy when they're not.
My piston keeps falling off? 😅 when it’s working it’s great but when it’s not pain in my ass and wallet 💳 😅😢 miss fire and at times it don’t even fire at all 😐
I've used this before, it's a great tool and saves time. I highly recommend it!
Ive used the Dx2, Dx351, GX120, GX2, GX3, and the BX3
Bx3 is by far the best out of the lot.
The gas guns stop running in low temps where the Bx3 will keep working (-30c)
The pin hold is amazing...1-2 misses in an entire mag.
The only downside to the Bx3 is that you cannot rapid fire as the piston needs to wind up in between shots
Theres 3AA bateries inside they do expire had to change mine out in the GX120. The reset button will pop out more when needed to press it.
good to know, thank you, ill take a closer look at mine, cheers
You can order the gas separate, I work at Hilti and ship many of them without the nails every week. :-)
great to know!! thanks for sharing that
@bryanhearn9924 Correct me if I am wrong, but the gas cartridge only leaks (slowly) when in the machine, because it pushes the cartridge valve in, right? Disengaging the cartridge from the machine, so taking it out when not in use, should stop the leak.
Works a treat in Paslode, guess it should work in this Hilti too, right?
Hilte says to remove the cartridge when you are not using the gun
Have you tried taking out the gas for prolonged storage and it still leaked?
i haven't, I actually just pulled this gun out last week to use and it had a full charge, I haven't used it in 2 years. so i'm pretty happy
Great video Brad!!!
Thanks for watching!
Nice video! Trying to source a Washer Holder X-WH G3 Magnetic #2102283 for the same nailer! not a contractor so I am stumped, Any idea's Thanks
i need How much sir
Good tips! Thanks
Glad it was helpful! thanks for watching
What is the price now of hilti GX3 coz i want to order
We’ve got an Amazon link in the description box that will give you the current price
How much cost
Im not sure what they cost at the moment, but i think they are over $1000 cdn. you should also check out the dewalt version. it's just as good but does not require any fuel, so it's cheaper to run
how many shots per gas cartage?
About 900 shots per fuel cell.
Small point of note, cement is an ingredient in concrete. The words aren't interchangeable. Nice job on the video.
That’s true. Even though people think they are. Thanks for watching
How much does it cost for a box of 1000 nails in US dollqrs
Best to call up your local supplier, prices are different everywhere
👍 Nice video I will better go with bx3
And good video
Thank you
I use these guns everyday at work sometimes they work okay have a hard time getting a three-quarter inch pin to hold in concrete the half inch pins hold great in the steel but get a ton of misfires with it especially when you're in an awkward position they are nice when they're working good but they're really crappy when they're not.
I agree, this I love this thing only when it works, seems like thats about 50% of the time, it and miss.
What is the price now of hilti GX 120 gas acctuated
My piston keeps falling off? 😅 when it’s working it’s great but when it’s not pain in my ass and wallet 💳 😅😢 miss fire and at times it don’t even fire at all 😐