Seadoo Spark I Fixed My Steering Wobble!

Поділитися
Вставка
  • Опубліковано 8 лис 2024

КОМЕНТАРІ • 19

  • @volvosweden
    @volvosweden 2 місяці тому +1

    Great! My 2012 GTI 130 has now same problem after 130 hours of use.

  • @Graychristopherr
    @Graychristopherr 2 роки тому +3

    Thanks for this. I used these two parts on my steering for my 19' Trixx at 48 hours. Back to like new with zero wobble.

    • @jaymanf1509
      @jaymanf1509 2 роки тому

      I have a 21 trixx and already have the parts..do you do it the same way he did??

    • @Graychristopherr
      @Graychristopherr 2 роки тому +1

      Yes, the same way shown in the video. It was really easy. One bolt removes the outside cover, two other bolts need to be removed on the steering neck. After that, the whole steering assembly slides up, allowing you to replace these two rings.

  • @tymiernicki
    @tymiernicki 4 роки тому +3

    This is such an easy fix! thank you very much for including the part numbers.

  • @johnpauladamovsky86
    @johnpauladamovsky86 5 років тому +2

    Hey buddy, thanks a lot for the video which helped me solve the notorious Sea Doo Spark steering-squeak problem in 5 minutes. Keep up the good work.
    The factory assembly team made sure not to grease the plastic bushings on my steering column. But now it steers like a dream. Nothing but champagne and caviar for me.

  • @randyboyce783
    @randyboyce783 4 роки тому +3

    Is it possible that the screws were just loose? You even mention that the plastic rings don't look worn down. So i'm wondering if it was putting the silicone lube and putting the screws back in that did the trick? Or did you try that before ordering the replacement parts?

  • @Woods9898
    @Woods9898 3 роки тому +1

    thanks bro! need this fix this season!

  • @jaymanf1509
    @jaymanf1509 2 роки тому

    Great video
    Do you think the same method would work on a 2021 spark trixx? I already have the parts..The dealer said that I need to take the hole top off??

  • @remythomas9364
    @remythomas9364 Рік тому

    Thanks very much can you do a tuto about the vidange please thanks

  • @EdgarFlotte
    @EdgarFlotte 6 років тому +2

    thanks, same thing happened to mine

  • @kaseybowen
    @kaseybowen 4 роки тому +1

    Thank you thank you!

  • @FilthyLuxy
    @FilthyLuxy 3 роки тому

    What website did you get it from?

  • @ThirdStrikeGaming
    @ThirdStrikeGaming 6 років тому

    I’m getting the same issue. Do you think the 2016 is the same part number? If so where did you buy them and how much did you spend?

    • @Engleburt
      @Engleburt  6 років тому +1

      I ordered from the seadoo website parts store. My steering parts were around $30cad I think. They will know the right parts.

  • @AirsoftAviation
    @AirsoftAviation 6 років тому

    My spark will turn left but not right at all? Any suggestions

  • @MarcusJKing
    @MarcusJKing 2 роки тому

    Good video!
    For my Spark TRIXX model, I had to replace the lower silver and upper black "adjustable riser blocks. On the TRIXX model there are two metal pieces that slide and lock together, so that you may adjust the height of the handle bar…mine wore out too bad so I replaced that as well.
    Part number #277002093 for the riser blocks.
    This is for the Spark TRIXX models only.