EPIC!!! So impressive. Fully proportional control as well. I love the way you built the steering rack. I've been building scale models, mainly aircraft for years, and also r/c planes and cars, so I'm used to small, fiddly, and hours of pacient work to make say a photo-etched cockpit for a 1/144th scale Ju 88A-4. So after watching your video I think I'm gonna give this a go. The other thing I want to do is make a 1/72nd scale r/c plane. And I reckon the tech you've used here would work just as well in the air! Great work.
I was looking for an example for turning a hotwheel to RC and found this video. The whole channel blows my mind, just starting right in but i think i found my new hobby haha! Great quality, great content, love it, keep it up!
I do the same thing; Also use the Tower Pro SG90... but I have found clones without the brand name that are actually smaller in controller and do not need the potentiometer.
@@PuriGarage I was trying to find a link for you on aliexpress, but since I am in China it is harder to find those same stuff. Anyway will keep you updated: twitter.com/gbraad/status/1323097400357974016 and twitter.com/gbraad/status/1321117088920924162
@@PuriGarage Yep, those are the ones... best to get without the TowerPro remark. These have a smaller board. The have holes for the potentiometer... but you can actually cut these off to make them even smaller. Just ought myself another 20 of them... as expected! and you should be able to use the motor and the gears from these too The clones use a motor driver and servo controller IC. As there is no potentiometer, the servo chip does not act on the position feedback. it will therefore only act to tell the motor driver with PWM what the speed should be. The real SG90's actually have a single IC implementation that starts to act weird with no value on the potentiometer pins, so you can modify these by adding some SMD resistor valued 1K or 5K between the middle and outer pins (to create a voltage divider) to fake the IC in just having a neutral position, it will therefore use the input to act as a PWM speed controller. This is why you had to keep the potentiometer on... but for size you can get some 0603 or 0805 sized to replace them (depending on which size you are comfortable to solder)... anything bigger is not suggested as it would not fit nicely.
HAGA UNO QUE CORRA DERECHO, TODOS HACEN "DRIFT". TOME EL RETO DE HACER UNO QUE NO SEA "DRIFT". SERIA EL PRIMERO Y TAL VEZ EL MEJOR DE TODOS LOS QUE HACEN LO QUE USTED (HE VISTO COMO 5 PERSONAS QUE HACEN LO MISMO) PERO UD. TIENE MEJOR TÉCNICA. PARA LA DIRECCION. SALUDOS Y FELICITACIONES.
I want to recreate one of these myself but what type and thickness are the wire and tubes? Also can you give more info on the exact electronics? I live in the netherlands so tokopedia isnt avalable here... Love the build!!!
@@PuriGarage I've watched them all :( I understand the micro servo to power the rear wheels I just don't know hot you connect it all to whatever you're controlling the car with? And how you get all the electronics working Forgive me I love your work and would love to be able to build one for myself, you're very talented, me myself not so talented in electronics or rc cars alone Pls help haha ❤
@@PuriGarage thank you for your reply 🙂. Did you use any U.B.E.C in car? Your video has inspired me and and I am planning to convert 1/32 scale Fast and Furious movie Chevrolet Impala into RC. Once again thank you ☺️
Salam dari malaysia mas Saya pon sedang bikin rc hotwheels rs 01 selepas tgk vid ini dong 😍 Saya mau tanyain kamu guna esc dari servo biru nggak? Atau kamu guna esc lain?
The amount of work and time put into these is incredible
Thanks
Pro trick : watch series at flixzone. Been using it for watching loads of movies recently.
@Ameer Talon Definitely, I've been using flixzone} for months myself :)
@@PuriGarage these for sale at all?
How do you keep front wheels on? I'm having problems
I am always impressed by these people who are capable of so much thoroughness in modifying such small vehicles. Congratulations. 👍
Thank You
You must have alot fun making these because the build came out great
EPIC!!! So impressive. Fully proportional control as well. I love the way you built the steering rack.
I've been building scale models, mainly aircraft for years, and also r/c planes and cars, so I'm used to small, fiddly, and hours of pacient work to make say a photo-etched cockpit for a 1/144th scale Ju 88A-4. So after watching your video I think I'm gonna give this a go.
The other thing I want to do is make a 1/72nd scale r/c plane. And I reckon the tech you've used here would work just as well in the air!
Great work.
Thank You Malcom
Thank you for this build.
Epic build my friend !
Beautiful work! Do a 1/64 Sprint-car. Would love to see a bunch of them on a small, dirt, tabletop track.
Perfect as always my friend 👍
That's looks incredible 🔥
Thanks
@@PuriGarage Your welcome ❤️
Excellent build!
Estupenda construccion y personalizacion de este Nissan GTR Nismo GT 1/64 RC Drift, mis respetos y saludos desde Venezuela.💯💯💯💯👍👍👍👍👍🤘🤘🤘🤘🤘💯💯💯💯
It's super cool, thanks for doing it.
good job
I was looking for an example for turning a hotwheel to RC and found this video.
The whole channel blows my mind, just starting right in but i think i found my new hobby haha!
Great quality, great content, love it, keep it up!
Thank You Padd…
how do u connnect it to the controller and where to buy the controller
@@iensmnd425 8:33 Get a FlySky Tx, bind it, and you should be good to go.
Verry good car 👍
Really love the fact you used Tarmac not just some cheap Hot Wheels haha
Hahaha
Amazing......crazy thing
Great work!!! Very awesome!!!👍👍
#request Modif monster truck :)
Sehat selalu mas….
Always kerrren,,,
Terimakasih
Hello friend Puri not only do you make very good cumstoms you can also leave them in RC you are the best thanks for so many great videos 🇦🇷✌
Thank You Carlos
Selalu senang kalau main ke channel ini. Keren selalu 👍
you guys turning hotwheels into rcs sick
Thanks
For whatever sake you are extraordinary.
Terimakasih, thank You
That's super cool! I wish I had the skills to make something like this
It was easy my friend
Great job 👏🏽
Thanks
Excellent presentation. 👏
Thank you 🙂
Mantab om👍🏻sehat selalu😁
Terimakasih
Hebat banget kamu bang,diescast sekecil gitu bisa jadi rc👏
Aye that a dope car you made bro and I like to drift my hot wheels car
Om alat-alatnya kumplit sekali om..😅👍
Harus euy, tangan udah goyang2
Gila, keren parahhhh 👍👍👍👍👍👍👍
Terimakasih
Dude you make it look too easy 👍🏻
“Just bend this fine wire into a perfect spiral around another piece…not too tight now. Okay, now…”
Took some serious skill to put this together
Thanks
Muito top... Parabéns 👏👏👏👏
Idolaku yg luar biasa ini❤️❤️❤️
Lástima no tenerte por España, y que me enseñases a hacer esas joyas. Una pasada de coche! 🤙🏼
Really amazing work bro... keep up the good work....
This is incredible.
Buen trabajo felicidades saludos desde Guadalajara jalisco
I do the same thing; Also use the Tower Pro SG90... but I have found clones without the brand name that are actually smaller in controller and do not need the potentiometer.
Hmm nice info thank You my friend
@@PuriGarage I was trying to find a link for you on aliexpress, but since I am in China it is harder to find those same stuff. Anyway will keep you updated: twitter.com/gbraad/status/1323097400357974016 and twitter.com/gbraad/status/1321117088920924162
@@gbraadnl is not easy because the clones usually doesn’t have name or brand
@@gbraadnl there is also sg90 360 i will try that
@@PuriGarage Yep, those are the ones... best to get without the TowerPro remark. These have a smaller board. The have holes for the potentiometer... but you can actually cut these off to make them even smaller. Just ought myself another 20 of them... as expected! and you should be able to use the motor and the gears from these too
The clones use a motor driver and servo controller IC. As there is no potentiometer, the servo chip does not act on the position feedback. it will therefore only act to tell the motor driver with PWM what the speed should be. The real SG90's actually have a single IC implementation that starts to act weird with no value on the potentiometer pins, so you can modify these by adding some SMD resistor valued 1K or 5K between the middle and outer pins (to create a voltage divider) to fake the IC in just having a neutral position, it will therefore use the input to act as a PWM speed controller. This is why you had to keep the potentiometer on... but for size you can get some 0603 or 0805 sized to replace them (depending on which size you are comfortable to solder)... anything bigger is not suggested as it would not fit nicely.
Good working bro i dont know how much time to make that rc car...........
A week
Yo my man can I get a link to buy that diecast? Also amazing rc build,it came out great :)
really cool build!! but next can you make a 1/64 scale rally car?
kherennn bang
Terimakasih Bruce
#request na Miata white
the servo is strong enough to inverse the gears and go way faster.
i love the mini rc xddd
I wish I can buy this or something just as cool
🙏
Badass!
Thanks
HAGA UNO QUE CORRA DERECHO, TODOS HACEN "DRIFT". TOME EL RETO DE HACER UNO QUE NO SEA "DRIFT". SERIA EL PRIMERO Y TAL VEZ EL MEJOR DE TODOS LOS QUE HACEN LO QUE USTED (HE VISTO COMO 5 PERSONAS QUE HACEN LO MISMO) PERO UD. TIENE MEJOR TÉCNICA. PARA LA DIRECCION. SALUDOS Y FELICITACIONES.
Are any of these for sale?
$200? 😉
GOKILL OMMM, OPEN PO OM BANYAK YANG MAU PASTI
Waduh waktunya Om kadang nggak ada
Bro you are a legend
Thanks
Best bang👍👍👍👍
dahlah gak ada lawan dah
Terimakasih
@@PuriGarage sama2 bang
hola master genio de la vida dios de los dioses
Muito masa mano 👏👏👏👏👏👏
Don't forget to add the brrimmbboooo brakes
Hehehe
Chingón 👏👌
I want to recreate one of these myself but what type and thickness are the wire and tubes? Also can you give more info on the exact electronics? I live in the netherlands so tokopedia isnt avalable here... Love the build!!!
Search by dasmikro 87 keyword, remote we use radiolink product
@@PuriGarage thanks!!!
👍
I love it❤️💞
Thanks
pagani zonda cinque please
9:25 as Tomley RC would say, 1 to turn and 2 to burn.
🤘👍🏻
alto que, ya esta lo hago
Easy nice idea will try it myself too the servo for stearing is not a 2 g servo it's a 1.7g servo isn't it ?
It is
Bro do next srt viper. GTS-R please big fan from malaysia
Terima kasih Malaysia
@@PuriGarage sama-sama brother
Will you ever make a tutorial for these
Nungu project rc kaleng
Rc kaleng apaan tuh?
@@PuriGarage yg kmarin make basic nya rc kaya coca cola itu
Can you make a tutorial or the rc side of things? And maybe a part list these look so fkn cool
I already have 3 video of this RC thing, maybe You can watch it and get the idea from it thank You 🙏🏻
@@PuriGarage I've watched them all :( I understand the micro servo to power the rear wheels I just don't know hot you connect it all to whatever you're controlling the car with? And how you get all the electronics working
Forgive me I love your work and would love to be able to build one for myself, you're very talented, me myself not so talented in electronics or rc cars alone
Pls help haha ❤
@@dejabeug7042 why not look up a video that explains RC system 101 or something like that bro. Do some homework 😀
Can you make a custom 1/64 car and make it RC drift too? it would be super nice
Were you ever a part of bitpimps or mrcc back in the day?
Is that like an arch welder or something your using to tak the paper clips together
It only works on stainless steel wire or nickels
PATEN! 👍👍👍
Beleza👍👍👍👍👍
Awesome work!!! Does the reviver have a built in gyro?
Yes it have
can you link where you buy the motors and little things!?
Nice one man. Awesome!!!
I'm wondering how much would you sell one of this?!
U$200
where did you buy those amazing parts on building Rc sir ?!😊
Most of them i buy it at local marketplace, you can try to search on radiolink as a keywords
I would like to see how you made the controller
Controler from generic rc transmitter
Impressive work.
May I know what battery you used and how to you charge it?
Battery from Bluetooth headset
@@PuriGarage thank you for your reply 🙂.
Did you use any U.B.E.C in car?
Your video has inspired me and and I am planning to convert 1/32 scale Fast and Furious movie Chevrolet Impala into RC.
Once again thank you ☺️
@@yassermasood3423 Those servo & receiver boards need conditioned voltage…perhaps the 5V controller out of the bluetooth headset.
is 2:55 am in brazil (my country)
Sorry
Can you please tell me which transmitter and receiver you use?
Hey bro, can you tell me what is name of the hollow tube you were using on the rear gear(3:00 min). Thx
Hmm is from brass tube for models
💚💖💙
İt is perfect
Thanks
Do i need to doe anything to the green blockon the servo/motor. My motor keeps running when it is connected.
Maybe the wire switched
still cant figure out how u put the pins that hold the front wheels in place XD
Many way, but it was not easy 😁
@@PuriGarage what kind of metal wire or where do u get that kind of metal for making the front steering part ?
Do you have list what item you used to make this model?
Salam dari malaysia mas
Saya pon sedang bikin rc hotwheels rs 01 selepas tgk vid ini dong 😍
Saya mau tanyain kamu guna esc dari servo biru nggak? Atau kamu guna esc lain?
Saya guna dasmikro 87 esc
@@PuriGarage ohh kk tq mas
Love your work 😍
Do a drag car that does wheelies
Nice idea
What type of wire did you use for the steering setup?
0,4 mm stainless steel wire
Plz combine 'Costomizing Exterior' with 'RC tuning'
Ok
Can you make a mini RC Nissan 350z?
Onde compro essas plaquinhas de radio control?
Local webmarket
I can cut vr on servo board?
Hey can u make video how to make front axle
Can you buy those ????
where do i go to get a motor that size and what scale would the motor be
Keyword dasMikro 87